Це відео не доступне.
Перепрошуємо.
Oxygen Regulator Repair - (BTS 08)
Вставка
- Опубліковано 22 лис 2017
- My oxygen regulator stopped working and would not hold the pressure in the tank. It shot out the top part of the regulator. I searched everywhere for repair kits. Actually I could not even really tell what brand regulator I had. In the end I suppose it was victor. I looked up repair kits and did not know which one. By looking at what parts I needed (which was just the piston) I tried finding one that had what looked like mine. I totally guessed. For $20 bucks I found one that worked. You can pause the video in the appropriate spots if you need to get the part number. The other parts in the kit did not belong to my regulator. Anyway, I hope you enjoy the video.
Justin, Great Vid., your reg is a Firepower reg, which is really a Victor import. It is identical to the Victor SR5B. The kit you bought wasn't the exact kit you need, but the seat assembly for the SR250 and the SR5B are identical. Now you have a diaphragm that will bounce around on your bench for a few years. Finally you'll throw it away, and one of your friends will need it the next day. I have parts like that laying all over the place. This is a shameless product placement, but I have the kits for most popular regs on eBay. Check out our store if you need any other kits. You'll save a few bucks and we include Krytox grease to assist in a perfect rebuilt. I'm starting to see a need for repair tutorials for gas apparatus. anyway, thanks for sharing. Oh, quick tip. You can put the inlet stem in the vise perpendicular to the rotation of the cap, and then use a pin spanner wrench to remove the cap without marring it.
Torchandregdoc, what is your ebay store name? I need a rebuild kit for a Victor SR 450 D
Kataria Welding Repair Center
we are repairing oxygen Reguleter, gas cutter, gas torch, blow pipe etc.
📲 9136152005
Main Karwal Nagar Road, Delhi-110094 (india)
I've bought from torchandregdoc several times as I rebuild my own torches and regulators. My nick on Weldingweb is "farmall".
@@mikeinindiana www.ebay.com/itm/REPAIR-KIT-VICTOR-SR450D-450-OXY-REG-OXYGEN-REGULATOR-REBUILD-PARTS-AV450RK-/141460836486
@torchandregdoc did you ever end up making repair videos?
Ouch!! Vicegrips on brass?? ...why?
Edit: you can omit the bottom pair of vicegrips by screwing the regulator securely to the bottle with face pointing up and service the whole thing like that and tape up the jaws of your vice grips or use an automotive wrench (aka F wrench) or a plumber's spud wrench or some smooth jawed channel locks. Just saying, from craftsman to craftsman, gummed up brass is the sign of a hack posing as a craftsman. ..its like those "handyman" types who have a bucket of tools painted a bunch of different company colors. Here's a tip. Next time you see a used bicycle inner tube, cut it up into long strips along its seam lines. Roll them up and use them for shit like wrapping your regulator so you can grip it in your vicegrips without marring it. Its also useful for tying up cords, wrap hammer handle, blah, blah, blah...
Hey thanks for the input. I'll keep that in mind the next time I have to fix one of my regulators.
@@JustinThorup no problem. I just reread my comment. I didn't mean to unload like that. I must have been bored. But I find it kinda strange that I was just messaging my buddy about the rebuild kits I got for my regulators. I mean, like , 40 min ago or something... Coincidence or AI enhanced algorithms? ..? Lol
j dog no problem. I’m definitely no expert. I make jewelry and this is the first time I had to repair this in 20 years. I may never have to do it again. Have fun with yours. :)
@@JustinThorup haha.. Have fun with mine? ..which one.. Lol ..I've got more than 5 different sets of them. Victor, Harris, Smith, Dayton, Craftsman. For a while, it was cheaper to buy people's oxy/acet rigs on craigslist, than it was to swap out empties at airgas. then, take all the empties down and trade 3 empties for 1 full at a local welding supply. ..but yea, when they start giving you trouble, I found that a quick disassembly and cleaning gets it back working fine but with oxygen, it's a good idea to wear rubber gloves and only use dish soap n water.
My Victor regulator doesn't look anything like this one on the inside.
This is an excellent training video, of what not to do.
Thank you. My first and only time, but it worked and is still working great today so that is what was most important to me. I can continue working.
I'm glad you got something from it. That makes it worth it to post. It's not a training video though. Just shows what I did to make it work and not have to buy a new one.
I have a question on the part you fix to set the pressure can you decrease the pressure the same as you do to put the pressure on gauge or you can't decrease?
I'm no expert and I'm not sure exactly what you mean, but you can twist the little handle on the regulator to increase or decrease the pressure.
saludos, tengo un regulador igual al de el video. y tengo una duda cuando le abro la valbula al cilindro se escapa algo de aire por los 2 orificios que tiene en la tapa que se desenrosca para abrir el manometro y si le tapo esos 2 orificios entonces vota aire por el tornillo que es con el que se regula la salida de bar. no se si me explique bien pero la pregunta seria tambien si esos 2 orificios son para que salga aire? o estara mala la menbrana gracias de antemano
La verdad, no soy experto en esto y solo he hecho este tipo de reparar un solo vez. Yo se cuando mi reglador no funciono el air salio del lado tambien. You pienso que la unica manera para saber seria para desarmarlo para verlo. Despues de examinarlo podria ver donde se escapa el aire. O compra las partes y remplace todo para estar seguro. Sin estar alli contigo no podria ayudarte bien. Mi consejo no creo es lo mejor porgque solo he hecho esto una vez. Suerte y espero que lo arreglas bien.
si claro si escapa gas por esos huequitos si esta mala la membrana cambiela y listo el regulador no tiene que escapar por ninguna parte!! suerte!
Si tambien Los mios acian eso Los cambie Las partes igual como el video lo puedes areglar suerte
you have more rings than my wife
😃😃 so true .
Its dangerous on work.
Hey thanks for noticing. I like wearing the jewelry I make.
Can a regulator suddenly stop working at all not due to mishandling or damage ?
My mom is on life support, we were told by caregiver that her regulator wasn't working.
I don't really know. It has never happened to me though.
I strongly suggest studying the factory manuals (you can download most of them) and if doing oxygen regulators learning to clean to oxygen safe standards.
Thank you for the input. I just needed it to work for my jewelers torch oxygen and propane.
Do you just do a search for Victor SR 450 D regulator manual, because I am not finding one? I have a oxygen and acetylene regulator that I need to rebuild since there is nobody even remotely close to rebuild it. From what I gather nobody like to rebuild them because of the liability.
After reading all the stories of what you can do and shouldn't do, I just purchased a new set, but I would like to rebuild the old set. I found on the net that you can't just use any soluble soap to clean, like Dawn soap since it contains petroleum and poses a fire hazard. And the grease (krytox grease) for the "T" handle on the valve is insanely costly. After figuring in all the cost, you can almost purchase a new regulator set for the specialty items you have to purchase.
Mine is leaking on that little hole on the top,
I'm no expert in repairs as this was my first time ever trying to repair a regulator. I'd say if you can find the part then try and fix it. If not then maybe it's time to get a new one.