Dude, I can't thank you enough for this vid! Excellent step by step breakdown, fantastic. I was having the same issue, voltages good going into the transformer, squat on the output. Desoldered, cleaned all lugs, trimmed and tinned all connections and bam! Solid. Much appreciated.
Great video, thanks for sharing! It’s pretty rare for transformers to go bad unless there’s been some sort of physical damage or major electrical event of some sort. Still a nice tutorial on how to test it. Thank you!
I picked up a ms pac man that didn't respond. Figured the transformers where bad but tried out your trick and tested them and they where perfect. Tossed them back in and the game starts up. No screen yet but thank you sir
Hey @jacklick I know this vid is old, but I left a bunch of spare Ms. Pac power blocks and harnesses at Troy's arcade when I was there. You are welcome to grab what you need.
Sure in arcade monitors are very sensitive to switching power supplies do you know which arcade games are very sensitive to switching power supplies because some of them I've heard that causes display anomalies and display errors by the characters I'm not sure why a switching power supply will emit the the clicking and the switching frequency which gets radiated and get induced into the arcade monitors but not all arcade games are sensitive to this only a certain arcade games are so you have to only use one linear power supply
Quick question...I'm trying to unhack the wiring of a Ms. Pac. Man with very little reference, and I just have a question regarding the wires running to the interlock switch and power switch. There should be two sets, one blue and one brown, correct? Do both sets run to the interconnect, then one set runs to the power switch? Thank you!
It was definitely transformer lugs needing reflow. I didn't show it in the video but wasn't getting any AC power to the PCB prior to that. The fuse holder that was questionable was for the monitor and still was functional but I replaced it for good measure.
On the high side of the transformer what kind of voltage do you get between ground and zero? I would expect none or very little but I'm getting 70 volts.
Hmm I am not 100% sure I know. You are referring to input side of the Game Transformer correct? Not the monitor isolation transformer. I would have to pull my game out and measure but you should have @120v between 0 and 117v lugs. I am not an electrician but Neutral is tied to Earth Gnd at most panels i believe so Hot to GND should be 120v just has Hot to Neutral should be 120vac. Do you have a gnd plug on your cord?
I have a ground on the plug. Initially I started digging into all this because I had no power when it was switched on. I had no low voltage at the lugs on the low side of the transformer. I pulled out the transformer and experienced the same thing you did on the test bench. So I hooked it back up on the high side in the machine. Still no low voltage, but I found the stray 70 volts on the neutral side. Would that cause the transformer not to work?
I will pull and check mine but agree your neutral to zero should be near 0 volts. Have you checked the neutral to ground at the outlet. I would just work backwards as this is basically direct AC and GND from the outlet to the power cord, through the power switch, to interlocks to fuse to transformer input.
jacklick thank you! I’m working on my Area 51 arcade today and watched this Video cuz I needed to test my transformer on it. I have a black screen and I do have neck glow but t when I moved the wires on the transformer the screen hit blue. Btw great work on your video learned a lot.
Dude, I can't thank you enough for this vid! Excellent step by step breakdown, fantastic. I was having the same issue, voltages good going into the transformer, squat on the output. Desoldered, cleaned all lugs, trimmed and tinned all connections and bam! Solid. Much appreciated.
Glad the video helped!
Great job explaining and demonstrating how to test a power transformer properly.
Thanks and appreciate the comment.
Great video, thanks for sharing! It’s pretty rare for transformers to go bad unless there’s been some sort of physical damage or major electrical event of some sort. Still a nice tutorial on how to test it. Thank you!
Thanks for comment and watching. I agree, I have yet to come across a bad/failed transformer.
Thanks for explaining this video. I have two dead Pac-Man’s and one dead Ms. Pac-Man. Maybe I’ll finally get one of them working again with your help!
Thanks for the comment and hope you get them up. 2 great classic games.
Great video. I watch a lot of arcade repair videos and your viedo was one of only a few that I actually learned something new. Keep it up.
I picked up a ms pac man that didn't respond. Figured the transformers where bad but tried out your trick and tested them and they where perfect. Tossed them back in and the game starts up. No screen yet but thank you sir
Glad the video helped. If the game is playing blind, you probably have a monitor issue. Good luck!
I agree, this is a really great video! Thanks for taking the time to make it!!
Hey @jacklick I know this vid is old, but I left a bunch of spare Ms. Pac power blocks and harnesses at Troy's arcade when I was there. You are welcome to grab what you need.
Cool. I don't have an immediate need but these are often missing when trying to convert something back.
Super informative. Thanks!
Sure in arcade monitors are very sensitive to switching power supplies do you know which arcade games are very sensitive to switching power supplies because some of them I've heard that causes display anomalies and display errors by the characters I'm not sure why a switching power supply will emit the the clicking and the switching frequency which gets radiated and get induced into the arcade monitors but not all arcade games are sensitive to this only a certain arcade games are so you have to only use one linear power supply
A+ if a bunch of the shots didn't have your hand in the way
I have a ms Pacman. Can the power supply and transformer be purchased new? Just like the original style
Not new but people sell old ones all the time.
Quick question...I'm trying to unhack the wiring of a Ms. Pac. Man with very little reference, and I just have a question regarding the wires running to the interlock switch and power switch. There should be two sets, one blue and one brown, correct? Do both sets run to the interconnect, then one set runs to the power switch? Thank you!
Did you figure this out? I would have to pull my game out to verify.
@@jacklick not yet, but i dont want you to have to do that. I was just wondering if you knew off the top of your head. Thank you!
So what do you think the cause was? Transformer lugs needing reflow, fuse holder, ?
It was definitely transformer lugs needing reflow. I didn't show it in the video but wasn't getting any AC power to the PCB prior to that. The fuse holder that was questionable was for the monitor and still was functional but I replaced it for good measure.
On the high side of the transformer what kind of voltage do you get between ground and zero? I would expect none or very little but I'm getting 70 volts.
Hmm I am not 100% sure I know. You are referring to input side of the Game Transformer correct? Not the monitor isolation transformer. I would have to pull my game out and measure but you should have @120v between 0 and 117v lugs. I am not an electrician but Neutral is tied to Earth Gnd at most panels i believe so Hot to GND should be 120v just has Hot to Neutral should be 120vac. Do you have a gnd plug on your cord?
I have a ground on the plug. Initially I started digging into all this because I had no power when it was switched on. I had no low voltage at the lugs on the low side of the transformer. I pulled out the transformer and experienced the same thing you did on the test bench. So I hooked it back up on the high side in the machine. Still no low voltage, but I found the stray 70 volts on the neutral side. Would that cause the transformer not to work?
I will pull and check mine but agree your neutral to zero should be near 0 volts. Have you checked the neutral to ground at the outlet. I would just work backwards as this is basically direct AC and GND from the outlet to the power cord, through the power switch, to interlocks to fuse to transformer input.
Hello. Where can I find Ms. Pac-Man cocktail arcade parts?
depends on what parts you need. the best place to go for help on arcade machines is forums.arcade-museum.com
@@jacklick Thank you
Does all them ms pac man cabinets have the extra games?
No, you have to buy a multi kit and install. There are several out there but i got this one from highscoresaves.com
jacklick thank you! I’m working on my Area 51 arcade today and watched this Video cuz I needed to test my transformer on it. I have a black screen and I do have neck glow but t when I moved the wires on the transformer the screen hit blue. Btw great work on your video learned a lot.