I’m sure I speak for all viewers when I say that no one regards your content as ordered merchandise to be delivered on time. That’s not how this works. Your past uploads will always be an invaluable treasure trove. Any squirt of new insight is seen as a bonus, no one expects the regular flash floods of knowledge that you have been blessing us with. Please focus on sustainability rather than regularity!
Thank you. I know it’s a pressure I put on myself to release the regular videos. I do feel like I let folks down if I don’t. But it’s nice to hear that maybe I should let myself off a little. Thank you.
I have been a 24/7 freelancer for half a century and know the importance of squeezing in some inviolable time off now and then. You don't want to neglect that. Happy flying!
What a humble person you are. I am not surprised people wanted to show their appreciation for all you do for the flying community. You're a big help, so thank you!
You don’t owe us anything mate! We all owe you for your time and knowledge of both open Tx and Ethos. Thank you for all you do for us. I personally would never have been able to figure out ETHOS on my own. My X20S thanks you as well.
Thanks for all you do! I couldn’t get my 60 year old brain to comprehend all this stuff without you! Remember to take time for yourself, life is short.♥️
Hi Darren, I’m extremely grateful for your Frysky instructional videos which I return to often. Take it easy and just look after yourself. Life can be very challenging at times, so hopefully this bump you’ll put it behind you soon.
I got into this hobby just a few years ago but honestly without your help I would still be on the ground, buying you a cup of coffee is a bargain for what you do. Thanks
I've learned all I know about FrSky etc from you. Thank you bud. Stay true. Be you. :) The only way is up! Dosh (as we call money here in the UK) on its way...
I was going to say don't let your hobby turn into your job, but I got to the end and it sounds like that's already the case! 🤣🍻 Your videos are always helpful, and I'll always watch whether they're once a week or once a month.
I know how you feel regarding excess work commitments and the passion to make videos. I am basically in a similar situation where work and family commitments have me struggling to even fly and work on craft as much as I want with the hobby. God I wish there were 2 of me at times lol.
Thanks Mr D i learned a lot about inav setting from you and i always refer back from all your videos we always support you channel have a good rest body and mind a big thanks you from Malaysia
Thanks Darren, All of your videos are golden bits of knowledge, I don't care if you only put out one video a year, Id wait for it and watch it. Cheers and I do fly them Like I stole it!!
good morning, please keep on posting the videos as they are very very interesting. I have only recently changed from Futaba to FR Sky transmitters to try to get my head around it. It’s very very complex but I’m lucky that we have a good buddy who suggested the transmitter and he’s very knowledgeable, but please keep the good work up, PS I have just recently brought some FR Sky servos. I haven’t had, enough time to test them yet but looking forward to
Thank you. I will still be making videos. But they will not be as often in the short term. The FrSKY servos are pretty cool. I have some small, light servos that I’ll be demonstrating with.
Thanks for the all inav videos you’ve done they have been a great help for me getting back into fixed wing FPV. P.s is there going to be any more wing talks, I really enjoyed listening to them on my commute to work.
Daren. It's always vital to keep that work - life balance. You are the apex of knowledge for the hobby. Your viewers will never let you down and will always be there.😊
Hey Darren, please don't apologize that you didn't have a time to do things for the community for free! Your review and guide videos are "the" videos people need to see to understand the topic. Glad you are doing OK (but busy) and nice to hear you can fly as a part of your job!!!
Thanks for everything ! Because of you and others I'm waste deep in a T1 vtol with lidar and legal Lighting for night/dusk oops and landings.... -10f wth
Better for everyone if you don't force yourself to make videos in weeks when you really can't; vs pushing beyond your limits, burning out and then you quit. We look forward to seeing what you put out whenever you can comfortably do so, without overdoing yourself.
Hello I just got an X20 transmitter. Cannot get Ethos to recognise the transmitter when connected via USB. Bootloader is 1.4.3. Computer is running Windows 11. Any thoughts?
I’m sure I speak for all viewers when I say that no one regards your content as ordered merchandise to be delivered on time. That’s not how this works. Your past uploads will always be an invaluable treasure trove. Any squirt of new insight is seen as a bonus, no one expects the regular flash floods of knowledge that you have been blessing us with. Please focus on sustainability rather than regularity!
Thank you. I know it’s a pressure I put on myself to release the regular videos. I do feel like I let folks down if I don’t. But it’s nice to hear that maybe I should let myself off a little. Thank you.
I have been a 24/7 freelancer for half a century and know the importance of squeezing in some inviolable time off now and then. You don't want to neglect that. Happy flying!
@@MrD I agree with Videolinquency
Thanks Mr D - we DON'T want to lose you! You have the best set of FPV goto videos on UA-cam!
Thank you, I really appreciate that. I don’t plan on going anywhere.
He does
What a humble person you are. I am not surprised people wanted to show their appreciation for all you do for the flying community. You're a big help, so thank you!
Thank you for your kind message 👍🏻
That's why I like him so much,he has always been like this,just a nice guy......pity the others don't learn from him❤❤
You don’t owe us anything mate! We all owe you for your time and knowledge of both open Tx and Ethos. Thank you for all you do for us. I personally would never have been able to figure out ETHOS on my own. My X20S thanks you as well.
Thanks Gary. I’m happy my videos are helpful.
Thanks for all you do! I couldn’t get my 60 year old brain to comprehend all this stuff without you! Remember to take time for yourself, life is short.♥️
Thanks for all , Darren. Take your time and keep your emotional well-being.
Thank you 👍🏻
Thanks for the update Darren, much appreciated.
No worries Doug 👍🏻
Thanks!
Thank you very much for your support 👍🏻
"It Can´t Rain All The Time!" From the movie "The Crow" if you remember that good old one. Heads up, Darren🤘
It’s a classic Jan. It’s been way too long since I last watched it. I’ll have to watch it again when I get a chance.
We love you always humble as ever remember the work life balance mate don’t burn out
Thanks Dave. I’ll make sure to balance it out with some holiday in a few months lol
Hi Darren, I’m extremely grateful for your Frysky instructional videos which I return to often. Take it easy and just look after yourself. Life can be very challenging at times, so hopefully this bump you’ll put it behind you soon.
Thanks Steven. I’m sure it will all be fine. I’m hoping for a great summer of flying and sharing with the RC/FPV community.
I got into this hobby just a few years ago but honestly without your help I would still be on the ground, buying you a cup of coffee is a bargain for what you do. Thanks
Thank you 👍🏻
Same with me,Darren has helped me for ages and understanding him is very easy
Whatever your problems are I am happy that you are alive and kicking again. I really like your channel.
Thank you. I appreciate the kind thoughts 👍🏻
I've learned all I know about FrSky etc from you. Thank you bud. Stay true. Be you. :) The only way is up! Dosh (as we call money here in the UK) on its way...
Thank you 🙏
Dont ever feel guilty for not getting videos out. Your health comes first mate
Thank you. It’s most appreciated 👍🏻
@@MrD no worries- and thank you for all I've learned from you 💪🏼😎👍
Daren, I can totally relate. Take care!
Thank you 👍🏻
You are a nice guy, always enjoy watching your videos 🙂
Thanks Tom, I really appreciate that 👍🏻
A very nice real person 😊
Coffee on its way mate👍 Keep up the excellent vids if you can,..youre a ⭐.
Thank you Chris 👍🏻
keep going man!
I will 👍🏻
I was going to say don't let your hobby turn into your job, but I got to the end and it sounds like that's already the case! 🤣🍻
Your videos are always helpful, and I'll always watch whether they're once a week or once a month.
Yeah, it’s my job, but also not. There’s enough differences for both the be separate. So I don’t have any loss of enjoyment from hobby flying.
I know how you feel regarding excess work commitments and the passion to make videos. I am basically in a similar situation where work and family commitments have me struggling to even fly and work on craft as much as I want with the hobby. God I wish there were 2 of me at times lol.
Sounds like cloning would be a great solution. But, the Rick and Morty episode with the night people makes me think stuff like that would backfire 😄
Very well deserved matey! So glad we all managed to get you your target! and Thank you again for making great videos and the help on Facebook etc 🙂
Thanks Mr D i learned a lot about inav setting from you and i always refer back from all your videos we always support you channel have a good rest body and mind a big thanks you from Malaysia
Thank you. I’m glad to the videos are helpful 👍🏻
Mr D. i follow you from Italy and i wish you all the best for your future plane!
Thanks Darren, All of your videos are golden bits of knowledge, I don't care if you only put out one video a year, Id wait for it and watch it. Cheers and I do fly them Like I stole it!!
Thank you. Though I think a year between videos may be a little too long 😄
No worries Mate, just keep doing what you do, and Enjoy 😊
good morning, please keep on posting the videos as they are very very interesting. I have only recently changed from Futaba to FR Sky transmitters to try to get my head around it. It’s very very complex but I’m lucky that we have a good buddy who suggested the transmitter and he’s very knowledgeable, but please keep the good work up, PS I have just recently brought some FR Sky servos. I haven’t had, enough time to test them yet but looking forward to
Thank you. I will still be making videos. But they will not be as often in the short term. The FrSKY servos are pretty cool. I have some small, light servos that I’ll be demonstrating with.
"Take the money and run." - Steve Miller Band
Quality song 🤘🏻
Thanks for the all inav videos you’ve done they have been a great help for me getting back into fixed wing FPV. P.s is there going to be any more wing talks, I really enjoyed listening to them on my commute to work.
Sooner wait for quality videos Darren, don't burn yourself out.😀
Thanks Keith 👍🏻
Daren. It's always vital to keep that work - life balance. You are the apex of knowledge for the hobby. Your viewers will never let you down and will always be there.😊
At the moment the balance is more towards work. But it could be very much worth it in the long run. Thanks for your kind words 👍🏻
Hey Darren, please don't apologize that you didn't have a time to do things for the community for free! Your review and guide videos are "the" videos people need to see to understand the topic.
Glad you are doing OK (but busy) and nice to hear you can fly as a part of your job!!!
Thanks. Yes, I’m really enjoying my job. Long may it continue.
Your videos are great. Don't feel pressured to make content. I'd rather see a few good videos than a bunch of crap or none at all.
Thanks for everything !
Because of you and others I'm waste deep in a T1 vtol with lidar and legal Lighting for night/dusk oops and landings.... -10f wth
Cool. Have fun with that.I’ve got the T1 VTOL kit. I’m just waiting on the foam kit to come back in stock locally.
We missed you! Good to hear from you again.
Thank Ard. I’ll be back …asap
Better for everyone if you don't force yourself to make videos in weeks when you really can't; vs pushing beyond your limits, burning out and then you quit. We look forward to seeing what you put out whenever you can comfortably do so, without overdoing yourself.
Thanks Ray 👍🏻 I’m really appreciative of all the support.
Hello
I just got an X20 transmitter. Cannot get Ethos to recognise the transmitter when connected via USB. Bootloader is 1.4.3. Computer is running Windows 11. Any thoughts?
...😜👍
Thanks!
Thank you very much 👍🏻