The problem is that the regulator leaks when its opened for use ! Gas is streaming out at the regulator itself,and it still possible to cook ! Thats very dangerous. How to make sure the seal holds the gas only in the tube until its exiting at the stoves burner ?
It’s inevitable to smell abit of gas as the regulator has to release some fumes or gas even though everything is tight and working you just have to keep ventilated if you have a hissing noise when nothing is running thats definitely a leak somewhere i would advise you seek professional help
Thank you so much for your query. First we we should close the regular (as it will stop incoming the gas into the burner) & then the burner and the same sequence when we want to lighting up the burner. Hope this will help. Best regards
sir, when the knob of the regualtor is on(but oven knob is off) , a very quite hissing sound and a very mild amount of smell( if i took my nose to regulator adjacent area ,then) is coming from the regulator area..is it normal or there is some problem in regulator?
When I first flip the switch of my 29mbar 21mm regulator to the on position, I hear a short burst of gas every time and then it stops. Is this normal? The short hiss / burst sounds like it is coming from the regulator each time it's switched on. The heater works fine, but shouldn't there no no short hiss noise coming from the regulator? Someone said it is normal from a pressure release but I'm not sure.
Do not try to open or repair your LPG cylingder, LPG gas stove or GAS REGULATOR. IT may harm your life or your family members. Please return to your gas dealer and take new REGULATOR. It may cost only Rs.150. and save your family.
@Chandan Hazarika Sometimes gas leak occurs from the interface between the cylinder & the regulator unit, if the " rubber washer " inside the cylinder is faulty. If possible please watch this ( hope this will clear some of your doubts ) : ua-cam.com/video/0xHnXUv2UlM/v-deo.html
I tried the leak test but the result is opposite. When the switch is on, there is no displacement of flame but when it is off, the flame is shaking. Can you help me why?
Thank you so much RENUKA for your valuable feedback. Can you please enlighten us which part of the video is seems to be fake so that I can get an opportunity to rectify my mistakes if any. God bless you and your family 🙏
I thought someone's gonna get married on this video lol. good job!
Hahahaha lol
The problem is that the regulator leaks when its opened for use !
Gas is streaming out at the regulator itself,and it still possible to cook !
Thats very dangerous.
How to make sure the seal holds the gas only in the tube until its exiting at the stoves burner ?
Reply to this
It’s inevitable to smell abit of gas as the regulator has to release some fumes or gas even though everything is tight and working you just have to keep ventilated if you have a hissing noise when nothing is running thats definitely a leak somewhere i would advise you seek professional help
Whether we have to first turn off the burner knob then regulator?
What is the right sequence?
Thank you so much for your query. First we we should close the regular (as it will stop incoming the gas into the burner) & then the burner and the same sequence when we want to lighting up the burner. Hope this will help. Best regards
this really helped in COVID-19 ,situation..GREAT!!
Thank you so much Mr. Ashish for all your appreciation. It really means a lot to me. God bless you and your family 🙏
sir, when the knob of the regualtor is on(but oven knob is off) , a very quite hissing sound and a very mild amount of smell( if i took my nose to regulator adjacent area ,then) is coming from the regulator area..is it normal or there is some problem in regulator?
It occurs when the rubber seal of the cylinder is faulty.
This looks quite scary
The music is also creepy
Thank you for sharing this useful video.
You're welcome and Thank you so much for your appreciation. It means a lot. God bless 🙏
Congratulation for information ☺️ℹ️👏👏👏👏👏 brother and I seeing 👁️👁️👁️ 8 👁️👁️👁️ for Nepal 🇳🇵 🇳🇵🇳🇵🇳🇵🇳🇵
Thank you 🙏
How a minute leak can determine by this?
Mam when the stove is on the cylinder make noise then is it normal?? Plzzz reply
When I first flip the switch of my 29mbar 21mm regulator to the on position, I hear a short burst of gas every time and then it stops. Is this normal? The short hiss / burst sounds like it is coming from the regulator each time it's switched on. The heater works fine, but shouldn't there no no short hiss noise coming from the regulator? Someone said it is normal from a pressure release but I'm not sure.
this is the pressure released from the cylinder,;ike when a bottle of soda is openend.
Can we use indane regulator in bharat gas cylinder
No
Good job 👍🏻👍🏻 🇮🇳 || Kuki 21|01|2022
Excellent video...
Thank you so much for your appreciation. It means a lot. God bless 🙏
That baground music is scaring the hell out of me though 🙄
Same!!🙈
Oh my God I thought to connect it to cylinder. Later I read as blow air.
Diaphragm jaldi kharab ho jata hai kya
Bhai meri gas min pe bhi kam ni hoti jitni honi chahiye dukan wala kehra regulator change hoga. Uske regulator me thik Kam kr ri h
When blow through with pressure valve on, candle flame intensifies. When pressure valve is off, nothing happens. What does this mean?
It means that the regulator has no leaks!
Pogo deko
Thank you
Thank you so much for all your kind words of appreciation. It really means a lot to me. God bless you and your family 🙏
Good job.....
Thank you so much Vynala for all your appreciation. It really means a lot to me. God bless 🙏
Which camera are you used sir in this video
Canon DSLR with 50mm f1.8 STM
@@science_sir thank you so much for reply
You're extremely welcome. God bless 🙏
Do not try to open or repair your LPG cylingder, LPG gas stove or GAS REGULATOR. IT may harm your life or your family members. Please return to your gas dealer and take new REGULATOR. It may cost only Rs.150. and save your family.
Really appreciate your concern. This video is not about saving money but about the knowledge for saving your family in emergency 🙏
I wish there was a voice over
Very useful vdo.
Thank you so much for your appreciation. Regards
@@science_sirsir one thing i would like to know..if the regulator is in off position how would the gas from cylinder leaks?
@Chandan Hazarika Sometimes gas leak occurs from the interface between the cylinder & the regulator unit, if the " rubber washer " inside the cylinder is faulty. If possible please watch this ( hope this will clear some of your doubts ) : ua-cam.com/video/0xHnXUv2UlM/v-deo.html
Thank you sir
Good bhai
Thank you so much Mr. Yadav for all your kind words of appreciation. It really means a lot to me. God bless you and your family 🙏
Gas reguleter eken on karama lek wenne ai
Rannar somai abaj hola ki korbo
Thanks
I tried the leak test but the result is opposite. When the switch is on, there is no displacement of flame but when it is off, the flame is shaking. Can you help me why?
Please check the orientation of the regulator Knob.
@@science_sir It's working now, maybe our countries have different knob orientation. Thank you so much for the tutorial. I was able to do it!
You're extremely welcome. God bless you and your family 🙏
Very good 👌👌👌
Thank you so much for all your appreciations. Regards
Nice
හරිම ලස්සනයි
Gunge ho kya bhai, thoda bolne me kya Harz hai
Vo gunga hoga par tum to andhe nhi ho na, padh lo.
Super
Thank you so much for all your kind words of appreciation. It really means a lot to me. God bless you and your family 🙏
Kya kar raha samjh bhi to aaye..kuch..
Ok
Hi
Janihelani thik se
Gunga youtuber hay kya.
Fake
Thank you so much RENUKA for your valuable feedback. Can you please enlighten us which part of the video is seems to be fake so that I can get an opportunity to rectify my mistakes if any. God bless you and your family 🙏
Thank you
You're welcome. God bless 🙏