Loved the video & the best part was your germ lesson!! I taught public school for a very long time & I tell everyone to homeschool now. Sounds like you’re doing a GREAT job! Proud of you for taking care of your kids. Hopefully you’re also teaching them about the One True Jesus & trusting Him ALONE for salvation.
Thanks for the video.. it helps me so much.. i've bought empty foaming pump and fill it with soap, but it doesn't foaming 😂😂😂 and i was like "damn, whats wrong" 🤪🤪
I'm glad it helped you! Hopefully you can work out your soap bottle! Worst case try emptying out the soap and then filling it with JUST water to flush it out and then fill it with your new foaming solution 💖
There's a more technological way to create foaming using an automatic foam soap dispenser. Simply mix soap and water, and you'll get high-quality foam with a wave of your hand. No pressing needed, which avoids cross-contamination and is more hygienic. Hope the blogger will try it out!
Foaming dish soap is a game changer. Great for washing oils off your hands but also great for when you just need to clean one dish and don't want to waste dish soap.
That is a good question. Maybe the type of liquid soap affects the dryness? I've seen creamy looking soap on the market. As far as too watery that might mean one of two things: 1. Whenever my good foam goes watery there's something up with the pump that I need to figure out or replace. 2. The ratio isn't working just right with your particular liquid soap. Maybe test it with less water because it should foam well. I hope that helps! ❤️
Everybody's knuckles and not all dispensers aren't the same size or shape. Measurement is needed. Dispenser not pumping the same amt of soap as in an original factory made product. Better results by using purified or distilled water. Hard water does change the product performance.
My knuckle is about an inch, hopefully that helps! Thank you for adding more information for viewers to consider when making a decision on what works best for their household. 🙂
Some liquid soaps don't foam this much, instead they make bubbly foams. What to add to rectify it? Adding any essential oils will resolve this problem? If yes, plz mention the name!!!
That is a good question. I would try adjusting the soap to water ratio, and if that doesn't work then maybe stick to the liquid soap brands that do create the foam consistency you're looking for.
I am not familiar enough with essential oils to know if you can put them in any liquid soap or if it has to be a specific type. Hopefully someone else who sees your question and knows will help us out!
As long as the pump was is designed to be a foam soap pump it will work. I actually bought empty amazon basics foam bottles recently and they work great! Any liquid dish/hand soap will work fine just make sure it incorporates completely with the hot water.
If the bottle is similarly shaped to the dispenser I would follow the same ratio since assumably the base is bigger than the dispenser bottle. Good luck! And please let me know how it works out for you!!
Thank you for reaching out! Mine comes out liquidy rather than foamy sometimes. There are a number of potential possibilities. Let's start with the easiest: 1. The pump is flooded with water - try taking it out and pump it to get the water out of the little mechanism (my cleaning video linked in the description box might help you see what parts I'm talking about, it's what we're cleaning out in that video) 2. If that doesn't do it. You might need a different soap ratio. I have different shaped bottles now and the ratio still works but it is possible that you need more soap to water or maybe even less soap to water. It might take trial and error. 3. Try different bottles. The new batch I ordered came with some that wouldn't push out foam despite troubleshooting so I ended up tossing them because the others worked great. I hope this helps! 💓
I hope you enjoy the foaming hand soap! I find foaming dish soap to be helpful when washing a single dish or couple of dishes that don't need a sink full of soapy water 🙂
That's a good question! I happened to be making one tonight and vertically up the bottle it ended up being about 2:1 water to soap but most foam soap bottles are wide at the bottom and become more narrow as they go up so I wouldn't say that it's a true 2:1 ratio.
Loved the video & the best part was your germ lesson!! I taught public school for a very long time & I tell everyone to homeschool now. Sounds like you’re doing a GREAT job! Proud of you for taking care of your kids. Hopefully you’re also teaching them about the One True Jesus & trusting Him ALONE for salvation.
Thank you ❣️
Indeed we are!
Amen!!!!
Love that this saves money on soap since you're not filling the container completely. Thank You ☺
😊 You're welcome!
Your family is adorable oh, you are such a fun mom way to go for getting the kids involved😄
Thank you! 💞
Love the idea of making a foaming dish soap, too!!
It is such a great time and resource saver when you just want to wash a small thing!
Absolutely awesome! Thank you for sharing this. I hate paying extra money just to have foamy soap.
You're very welcome!
Just love her voice..❤️❤️❤️
Very helpful video! Loved how you teach science to kids side by side!
You're welcome and thank you!
Please remember that if you have hard water the foaming efficiency drops significantly. I use distilled water and it's amazing.
That's a great tip, thank you for sharing!!
@@OnTheSamePageTogether With today's crazy prices we gotta look out for each other
Me too with tablespoon of alcohol
Thank you for sharing I was wondering how to do them both and you saved me from searching I definitely will be trying this Happy New Years 2022!
You are so very welcome!!
Here's to 2022, you've got this! 🥳
Excellent. Thank you for posting.
You are very welcome!
Loved kids involved❤️
Thank you! They learn best by doing ☺️
Good deal...
Money saver!! Thanks
You're welcome 😁
Thanks for the video.. it helps me so much.. i've bought empty foaming pump and fill it with soap, but it doesn't foaming 😂😂😂 and i was like "damn, whats wrong" 🤪🤪
I'm glad it helped you! Hopefully you can work out your soap bottle! Worst case try emptying out the soap and then filling it with JUST water to flush it out and then fill it with your new foaming solution 💖
There's a more technological way to create foaming using an automatic foam soap dispenser. Simply mix soap and water, and you'll get high-quality foam with a wave of your hand. No pressing needed, which avoids cross-contamination and is more hygienic. Hope the blogger will try it out!
@@Wisekoti I'm definitely intrigued! Would you be interested in sending me one to try?
Foaming dish soap is a game changer. Great for washing oils off your hands but also great for when you just need to clean one dish and don't want to waste dish soap.
YES!!
Thank you for taking the time to leave a comment and share this insight 💖
Thanks so much for sharing / Love it & such cute little helper(s)
You are so welcome and thank you!
That was wonderful, thanks both of you for sharing!
You are so welcome!
Thanks for sharing this!! It’s really helpful!!
You are very welcome!!
Thanks for the help :)
You're welcome! Thank you for taking the time to leave a comment ☺️
Maa Shaa Allah TabaarakAllah
Very Good analogy. 👍👍👍
I've also done this before.😍
I also use my knuckle to measure! Yeah
Yass!
Eventually, you'll need to pull the pump apart & reapply silicone grease on the piston to make the pump action smooth again.
Good to know!
Thank you for sharing ☺️
very easy and it works!!
Thanks for the feedback!
@@OnTheSamePageTogether No problem!
Really nice video tks keep safe and hav a blessed day..
Thank you for taking the time to comment! I hope you have a wonderful day and enjoy your foam soap 🧼 💖
Wow this is awesome
Thank you!
Thank you so much for sharing!!
You are so welcome! Thank you for taking the time to leave a comment 🥰
P. S. Love the Kiddo's voice over at the end about the video being helpful. :)
Thank you! They absolutely love being involved however they can be.
Awesome. Thanks!
You're welcome!
I am going to do it to 😁🤣😄🤣😁😄🤣🤣😁😄🤣😁😄🤣😁😄😁😄😁😁😄😁🤣😄😁😄🤣😁🤣😁😁😁😁😄😄🤣😄😄😄😄😄😄😄😄🤣🤣🤣😁😄🤣🤣😄😁😁😄🤣🤣😄😁😁😄🤣
Now the question what ingredient to add so it does not dries you skin and makes foam smooth & creamy not watery?
That is a good question. Maybe the type of liquid soap affects the dryness? I've seen creamy looking soap on the market.
As far as too watery that might mean one of two things: 1. Whenever my good foam goes watery there's something up with the pump that I need to figure out or replace. 2. The ratio isn't working just right with your particular liquid soap. Maybe test it with less water because it should foam well.
I hope that helps! ❤️
To help with dryness...just add a little bit of any essential oil you like
Thank you so much for sharing your tip!
@@OnTheSamePageTogether you're most welcome😊
Awesome thank you love it..keep the tips coming
أنا أضيف كذلك قليلا من جل المعقم يعطي رغوة أكثر كثافة
Everybody's knuckles and not all dispensers aren't the same size or shape. Measurement is needed. Dispenser not pumping the same amt of soap as in an original factory made product. Better results by using purified or distilled water. Hard water does change the product performance.
My knuckle is about an inch, hopefully that helps!
Thank you for adding more information for viewers to consider when making a decision on what works best for their household. 🙂
Thank you so much
You are so welcome!
Add warm water first. Only way.
Before adding the soap? I've never tried that before, thanks for the added thoughts!
Cute
Thank you
You are SO welcome!! Thank you for taking the time to leave a comment! 💖
How easy
Isn't it great?! The ease of it makes it sustainable 😊
Thank you!!!!
You are very welcome!
Some liquid soaps don't foam this much, instead they make bubbly foams. What to add to rectify it?
Adding any essential oils will resolve this problem? If yes, plz mention the name!!!
That is a good question. I would try adjusting the soap to water ratio, and if that doesn't work then maybe stick to the liquid soap brands that do create the foam consistency you're looking for.
I am not familiar enough with essential oils to know if you can put them in any liquid soap or if it has to be a specific type. Hopefully someone else who sees your question and knows will help us out!
Awesome
Thanks!
Why not put the water in first then the soap? Worked for me.
Good to know it can work both ways!
@@OnTheSamePageTogether It mixes easier too
Can we use any pump or any hands ash?
As long as the pump was is designed to be a foam soap pump it will work. I actually bought empty amazon basics foam bottles recently and they work great!
Any liquid dish/hand soap will work fine just make sure it incorporates completely with the hot water.
The new question can I put toothpaste in instead of soap I want to make foam toothpaste to save money?
That one I have never even considered. Search UA-cam maybe there's a video out there.
Quality of the water is a concern for me. Maybe better to use battled water instead of tap water?
You could definitely use bottled water. Warmer water will blend with the soap better than cold water but use what you have access to!
How much would I use if I did a 32 oz bottle of so I can have it on hand & not make it everytime?
If the bottle is similarly shaped to the dispenser I would follow the same ratio since assumably the base is bigger than the dispenser bottle.
Good luck! And please let me know how it works out for you!!
For me it isn't working,it comes out as a liquid form,please can someone help
Thank you for reaching out! Mine comes out liquidy rather than foamy sometimes. There are a number of potential possibilities. Let's start with the easiest:
1. The pump is flooded with water - try taking it out and pump it to get the water out of the little mechanism (my cleaning video linked in the description box might help you see what parts I'm talking about, it's what we're cleaning out in that video)
2. If that doesn't do it. You might need a different soap ratio. I have different shaped bottles now and the ratio still works but it is possible that you need more soap to water or maybe even less soap to water. It might take trial and error.
3. Try different bottles. The new batch I ordered came with some that wouldn't push out foam despite troubleshooting so I ended up tossing them because the others worked great.
I hope this helps! 💓
i might make the hand soap. Not so sure foaming dish soap is a really good idea.
I hope you enjoy the foaming hand soap!
I find foaming dish soap to be helpful when washing a single dish or couple of dishes that don't need a sink full of soapy water 🙂
So 3 to 1 or 4 to 1
Water to soap?
That's a good question!
I happened to be making one tonight and vertically up the bottle it ended up being about 2:1 water to soap but most foam soap bottles are wide at the bottom and become more narrow as they go up so I wouldn't say that it's a true 2:1 ratio.
@@OnTheSamePageTogether Thanks for the fast reply.
You are so welcome!
The dish soap is fine but the hand soap is not meant to be diluted with water.
Hmm I did not know that, definitely something worth researching, thank you for sharing!
Wow, I am amazed at the fact that the western world now needs an instructional video on how to mix soap and water. We are in sooo much trouble...
🙄
You'd better title this video as
"How to dilute liquid soap"
That's the point. This will save you money because people are paying a premium for diluted soap at the store