Hey Ricardo big fan of you and supporter of your techniques, I have a video request, should be fun fast and informative for most of us newbies, video request is on how and when to use the clipper oil, the cool cares, how often to clean your machines (after how many haircuts) and anything else you can think off ... Hopefully you can do this with your busy schedule man .. Thank you and blessing to you and your family
That's great, I wish I could charge that but I live in a small town here in Missouri n charge $10 I'm kinda shy to charge a bit more you know but very confident in my work n a lot ppl love my work. That's good bro I say go for it, I could see you're very passionate about barbering.
I love my Wahl Detailers. It has a rotary motor, easy to adjust, and doesn't heat up. I use the mirror trick to adjust my blades and my Detailers came with the T-Wide blade. I would definitely recommend these trimmers to anyone out there.
Hey Ricardo, I just purchased the Wahl Detailer and it didn't come with the zero gap and screw driver component. I believe these are a new upgrade to their original version as it comes with the T-wide adjustable blade. Is there a way to get the zero plate. I am not a barber, I just use them on my own head. Every time i've looked to adjust my previous clippers i've messed them up. Master fader, Andis T outliner etc
nice video man. next vid is gonna be the fast feeds? the fast feeds is my main clippers but i never been able to fully zerogap them with the standard blade which is kinda frustrating since i cant fade to bald with them
Oster fast feed video soon? I zero gapped mine and after like five minutes if use I get this rattle sound out of them. Everything is tight and it doesn't cut at different, but I assume it can't be good. Any thoughts?
I can't wait to see your review of the legends. I am thinking about buying a pair. Also, I have the wahl Detailer. Do you think it's worth buying the Hero? Great vids and honest reviews! Thanks. Jason
it never hurts to have multiple trimmers. the hero is good too but its a bit louder and heavier i think than the detailer. not a bad trimmer and they are hitters too. its all up to you honestly. personally id get another detailer just because of the noise of the heros.
@ricardothebarber. ricardo im going to buy a wahl detailer. but im doubting...whats the difference in the wahl detailer and the wahl 5 star afro detailer????
I have a problem with my styliner II maybe you could help me out. I dropped it a few weeks ago and had to replace the blade. Ever since I started using it again it sounds louder than usual and randomly makes that loud, annoying BUZZ sound like when you adjust the screw on the side. I've tried adjusting that screw, but it doesn't seem to help.
Hi there, I have adjusted mine several times. But when I turn on the trimmer. The bottom blade overlaps the top one. I have tried numerous times. When the machine is off the blades are in the correct position, but when turned on the bottom one overlaps the top Which causes the trimmer to bite. I'm so lost and don't know what to do? Do I have to adjust the tension or? Pleas help me out, thanks :)
Ricardo, when you fade and make your first guideline by balding out with these wahl detailers, is the andis master the best clipper to remove the bald line?
any clipper is good for removing that line made by any trimmer and if its zero gapped and the clipper isnt then its not gonna remove that line and if they r both not zero gapped then yea it would and but if the trimmer is zero gapped and ur clippers r zero gapped then it would also take out that line
20 dollars. I've worked in a shop before and would love to go full time but my girl doesn't like that idea. My main job pats good but if things change I'm going for it, thanks for the support
watched your video and went to set my detailers with the tool and it didn't fit lol. I'm guessing it's cause it's the tool that came with the hero. But I figured since the blades are interchangeable it would still fit but it didn't so clearly there's two different size tools which you probably have both
Hey ricardo.. I just swapped out my blades cuz my original was gettin old. After i replaced the blade the trimmer doesnt sound the same. Sounds a little louder any way how i can fix that?
So do you prefer these trimmers over the andis t outliners ? I feel like getting some but I seen some reviews that these ain't that powerful enough? But I feel like getting some still since my andis t outliners even I zero gap them and they are leaving some of my clients irritated really bad even though my blade is perfectly below the top. Would recommend these then ?
Yes I do recommend these. These are my favorite and although they do have less power than other larger trimmer they work perfectly fine in all areas of cutting hair.
What's up Ricardo? let me shoot a quick question your way Bro hey I've own my detailers right at 6 months almost man and I can't get this trimmer to hit like my andis at all. My detailer came with the T-wide blade and I've even had them sharpened as recent as a month ago. i like the trimmer but right now it's not living up to the name. help me out!
+Ricardo The Barber yea that may be the problem Bro how would I be able to get an older blade? I'm thinking about just giving Wahl a call and just getting two new blades from them directly.
My detailers didn't come with a zero gap device nor a screwdriver. The first pair did, the second one I bought didn't. I asked around and others said the same, so I wonder if only a select few still have them. Any feedback?
BoChosen Could be different versions of the trimmer package. Sometimes i now wahl does this and sometimes repackages differently. This is probably the reason.
I just got a pair of these but my problem is I like to zero gap them so there cutting like razors, but I want to make my Detailers just as sharp but they won’t hurt kids
mine came with the t wides theyre my second favorite the only reason its a second is because i recently got the wahl hero's and theyre my hitters for sure i suggest u try them out
theres actually a way to change that its the hump on it im guessing if u take the silver part off that says wahl heros it gets alot thinner and more manageable what u do is unscrew it from the back and the main faceplate should come off
yeah thats the fault to em they are loud which sucks but hey every liner has their faults tho like on the detailers that giant unnecessary loop on the back gets in the way sometimes ,andis t outliners heat up too fast (which is why i cut the top housing off so more air circulates and keeps it running cooler ) the styliners are too big (for my hands anyway i got smaller hands ) so i find it harder for me to use em all great liners but they all have faults imo
+DJ Takin' It Back no he had the stock detailer blade. The twide is the blade he bought. The twide is the same size as a andistoutliner blade. The stock blade is pretty small
Great video review and thanks for distinguishing the difference and zero gapping what it really means zero Gap doesn't mean a zero-gap there is a little gap between the stationary and cutting blade because you need room for the stationary blade to grab the hair so the cutting blade can cut it basic physics. Hi5 bruh...
@Ricardo_the_barber do you think it'd be possible for you to zero-gap my oster fast feed bruh if i could ship them out to you ? I have them and i've tried doing it but i cant. I
Nice i knew there was a reason i believed it didnt fit. I have two of them one is heros other is detailers. I obviously used the detailer version when i was used to the hero version. Thats why i was surprised in the vid.
Point one I didn't get the luxury of getting that gap tool with my detailers but not trying to be a dick I basically stopped considering your advice the second you found out you could get the double wide blade in that tool
this is the most helpful and informative video about the wahl detailer on UA-cam. thank you
Hey Ricardo big fan of you and supporter of your techniques, I have a video request, should be fun fast and informative for most of us newbies, video request is on how and when to use the clipper oil, the cool cares, how often to clean your machines (after how many haircuts) and anything else you can think off ... Hopefully you can do this with your busy schedule man .. Thank you and blessing to you and your family
That's great, I wish I could charge that but I live in a small town here in Missouri n charge $10 I'm kinda shy to charge a bit more you know but very confident in my work n a lot ppl love my work.
That's good bro I say go for it, I could see you're very passionate about barbering.
Hahahaha, I love the part when you said " you can't put this blade in with, oh wait yes you can there goes my video" hahahaha classic.
+Kevin Smith When keeping it real goes wrong lol
+Ricardo The Barber whats better for outlining neck lines cheeks etc.. wahl Detailer or andis outliner?
Myman I always learn cool stuff from these videos thanks for giving back like you do. Keep it up!! God Bless!!
I love my Wahl Detailers. It has a rotary motor, easy to adjust, and doesn't heat up. I use the mirror trick to adjust my blades and my Detailers came with the T-Wide blade. I would definitely recommend these trimmers to anyone out there.
Hey Ricardo, I just purchased the Wahl Detailer and it didn't come with the zero gap and screw driver component. I believe these are a new upgrade to their original version as it comes with the T-wide adjustable blade. Is there a way to get the zero plate. I am not a barber, I just use them on my own head. Every time i've looked to adjust my previous clippers i've messed them up. Master fader, Andis T outliner etc
+Fabian Pagani I would check abay or the richbarbercompany.com
+Ricardo The Barber www.therichbarber.com/
I didnt get that zero gap tool with my detailer... :-(
I did
Good vid. The screws you unloosen at 3:42. Do you know what size/type they are? I need some spares.
Nice video. I was waiting for the pics like you did with the masters at the end. Quick question are your fast feed zero gapped?
oxclu Fast feeds are but i cant do a vid because it was outrageous work to do so.
@@kikado3 what do u mean it was outrageous work to zero gap them bro
Thanks for the vid Ricardo felt like u answered my prayers haha. Appreciate your work man
7:08 " i just buy things, i dont really look at the prices anymore." GOD DAMN, HOW MUCH DO THEY TIP YOU?
great video as usual! i have the wahl detailer now for the past 3 years. just use it to cut my hair and beard. how often should i replace the blade?
a2fitness I do once a year
nice video man. next vid is gonna be the fast feeds? the fast feeds is my main clippers but i never been able to fully zerogap them with the standard blade which is kinda frustrating since i cant fade to bald with them
Oster fast feed video soon? I zero gapped mine and after like five minutes if use I get this rattle sound out of them. Everything is tight and it doesn't cut at different, but I assume it can't be good. Any thoughts?
Ya check to make sure the blade holder is pushed up a bit sometimes ther not enough pressure all you have to do is bend it up a bit.
I can't wait to see your review of the legends. I am thinking about buying a pair. Also, I have the wahl Detailer. Do you think it's worth buying the Hero?
Great vids and honest reviews!
Thanks. Jason
Jason Ifill no problem man. Ill prob do a haircut video then the review. Keep on the lookout and thanks for watching and commenting.
it never hurts to have multiple trimmers. the hero is good too but its a bit louder and heavier i think than the detailer. not a bad trimmer and they are hitters too. its all up to you honestly. personally id get another detailer just because of the noise of the heros.
Thank you so much for all you tips always 💈
@ricardothebarber. ricardo im going to buy a wahl detailer. but im doubting...whats the difference in the wahl detailer and the wahl 5 star afro detailer????
I have the detailer and the zero gap tool but the blade is still very sharp that it leaves red mark lines on people
Great video!! Just what i needed to know!!
Thank you for this. My Detailers motor has been acting sluggish. Do you think its time for new ones?
id say yes
I just purchase the wahl's detailer and it didn't come with the zero gap tool or screwdriver. Do you know where this product can be purchased from????
I have a problem with my styliner II maybe you could help me out. I dropped it a few weeks ago and had to replace the blade. Ever since I started using it again it sounds louder than usual and randomly makes that loud, annoying BUZZ sound like when you adjust the screw on the side. I've tried adjusting that screw, but it doesn't seem to help.
Hi there, I have adjusted mine several times. But when I turn on the trimmer. The bottom blade overlaps the top one. I have tried numerous times. When the machine is off the blades are in the correct position, but when turned on the bottom one overlaps the top Which causes the trimmer to bite. I'm so lost and don't know what to do? Do I have to adjust the tension or? Pleas help me out, thanks :)
Hey what is the model of the wider blades you use and where did you get them from?
T wide. It's about $20.
what is that product that your using to zerogap your liners, when i bought mine it didnt come with that
tyrell jones you can buy online, look up rich barber zero gapper
Julian Ruiz the zero gap tool are for only Andis trimmers
@@Asanchez78 b.s. those are wahl tool.
You gotta buy the silver Detailers to get that gap tool
@@Asanchez78 they sale them online..
I got mine from Sally's for $39.00 just because there was another supply store close to them.
Ricardo, when you fade and make your first guideline by balding out with these wahl detailers, is the andis master the best clipper to remove the bald line?
any clipper is good for removing that line made by any trimmer and if its zero gapped and the clipper isnt then its not gonna remove that line and if they r both not zero gapped then yea it would and but if the trimmer is zero gapped and ur clippers r zero gapped then it would also take out that line
How much for a fade Ricardo? I've been a fan of your work for so long and you're great have you ever thought about working at a shop bro
20 dollars. I've worked in a shop before and would love to go full time but my girl doesn't like that idea. My main job pats good but if things change I'm going for it, thanks for the support
watched your video and went to set my detailers with the tool and it didn't fit lol. I'm guessing it's cause it's the tool that came with the hero. But I figured since the blades are interchangeable it would still fit but it didn't so clearly there's two different size tools which you probably have both
Ricardo, would this trimmer be ok if i work with it and oster fast feeds only?
You just got owned by your own adjustment tool lol just kidding great video man!!!
YOU are funny! I love this! I love your videos!
+crazyleslie lol thank you so much
Hey ricardo.. I just swapped out my blades cuz my original was gettin old. After i replaced the blade the trimmer doesnt sound the same. Sounds a little louder any way how i can fix that?
NICE MAN,VERY NICE VIDEO THANK YOU FOR IT!!!
Where you get that black adjustment tool from?
Lol never mind, It came with my detailer
So do you prefer these trimmers over the andis t outliners ? I feel like getting some but I seen some reviews that these ain't that powerful enough? But I feel like getting some still since my andis t outliners even I zero gap them and they are leaving some of my clients irritated really bad even though my blade is perfectly below the top. Would recommend these then ?
Yes I do recommend these. These are my favorite and although they do have less power than other larger trimmer they work perfectly fine in all areas of cutting hair.
Can you do a video on how to oil your 5 star detailer properly!
Will do. Although I really never oil them I can show how I do when I do
Ricardo The Barber Please do it ASAP!
What's up Ricardo? let me shoot a quick question your way Bro hey I've own my detailers right at 6 months almost man and I can't get this trimmer to hit like my andis at all. My detailer came with the T-wide blade and I've even had them sharpened as recent as a month ago. i like the trimmer but right now it's not living up to the name. help me out!
+1985themovement Man i hear this a lot. If its new ive heard wahl made the blades cheaper than the older blades. This could be your problem
+Ricardo The Barber yea that may be the problem Bro how would I be able to get an older blade? I'm thinking about just giving Wahl a call and just getting two new blades from them directly.
HEY HOW MUCH DOES BARBER SCHOOL AVG PRICE IS?
Can you do one on how to zero gap the osters fast feeds
My detailers didn't come with a zero gap device nor a screwdriver. The first pair did, the second one I bought didn't. I asked around and others said the same, so I wonder if only a select few still have them. Any feedback?
BoChosen Could be different versions of the trimmer package. Sometimes i now wahl does this and sometimes repackages differently. This is probably the reason.
Ricardo The Barber Ok, thanks for the feedback. Keep postin' and I'll keep watchin'.
Deal
The black Wahl Detailers seem to be the ones that come with the set tool. It states it on the box. The Wahl 5 Stars don't come with set tool.
torito90 Thanks for the feedback. Greatly appreciated.
If I Bought the Detailer with the standard blade can I put the wider blade if I bought the silver Detailer?
I know ya have the andis t liners with the modified blade. Which one would ya prefer now that you have both?
+xHibachi24x andis with modified is beast
So..... How are the legends handling brotha?
I just got a pair of these but my problem is I like to zero gap them so there cutting like razors, but I want to make my Detailers just as sharp but they won’t hurt kids
Where do i get the 0 gapper and the driver ?????
My trimmers did not come with the zero gap gadgets. Do you know where I can get those?
I dont think you can just buy them. There are different brands on therichbarber.com you can get them there.
Amazon might have it, but the ones from therichbarber.com are really good. I just got mine and my trimmers are getting a super clean line.
Ricardo The Barber Haha shout out to Chucka Torres man!
mine came with the t wides theyre my second favorite the only reason its a second is because i recently got the wahl hero's and theyre my hitters for sure i suggest u try them out
i have them but hate the body on them.
theres actually a way to change that its the hump on it im guessing if u take the silver part off that says wahl heros it gets alot thinner and more manageable what u do is unscrew it from the back and the main faceplate should come off
True but it also leaves the machine partly open and easier to brake.Nothing a little tape cant help tho. More power but i love these detailers
they are just a bit too loud for me so i know its got to bother the clients ear. they are hitters just too loud.
yeah thats the fault to em they are loud which sucks but hey every liner has their faults tho like on the detailers that giant unnecessary loop on the back gets in the way sometimes ,andis t outliners heat up too fast (which is why i cut the top housing off so more air circulates and keeps it running cooler ) the styliners are too big (for my hands anyway i got smaller hands ) so i find it harder for me to use em all great liners but they all have faults imo
great review, very in depth
What is the name of the blade you purchased for the Wahl Detailers? (4:30 mark of the video).
The blade he purchased are the "T-wide 5 star detailer blade".
Jason Tomas isn't that the blade that comes with it
+DJ Takin' It Back no he had the stock detailer blade. The twide is the blade he bought. The twide is the same size as a andistoutliner blade. The stock blade is pretty small
Jason Tomas gotcha. Do you know where I can get one from
+DJ Takin' It Back text me bra ill give u more info 7173164147
Great video review and thanks for distinguishing the difference and zero gapping what it really means zero Gap doesn't mean a zero-gap there is a little gap between the stationary and cutting blade because you need room for the stationary blade to grab the hair so the cutting blade can cut it basic physics. Hi5 bruh...
How can I make my detailer quiet?
its really loud compared to the first one I had ..
what trimmers do you recommend to care for a full beard?
Ignacio Rios Andis OutLiner 2
Can you send me one of those adjust tool
Hey how can I get the my detailed to stop feeling the grabbing and cut smooth. Thanks
+Luis cruz Is there a modded blade on there?
+Ricardo The Barber you can magnitize that screwdriver by swiping it across a strong magnet in the same direction about 20 times..
clean,oil and let it run. if that doesn't work, get the finest sandpaper you can find and run the blade across it a few times.
What model are those?
@Ricardo_the_barber do you think it'd be possible for you to zero-gap my oster fast feed bruh if i could ship them out to you
? I have them and i've tried doing it but i cant. I
Can you put the tattoo blade on the detailer?
Yes
+Jordon Platt thats badass thanks for letting me know :D
great vid
When you can do a video of the tension screw of thw andis t outliner
great video !
Great info. Thanks!!!!!
is it safe to cut my facial hair/neck hair with this little thing or is it stricly for detailing lineups
Yes i use mine all the time to shave etc with!!
+Josh Ainsworth you shave with these trimmers? That's what I'm looking for.
+BellyUpFish yeah all the time!! Work perfect! And then you can outline etc with them!!
That's a lot for a small clipper but it works
Where are you located?
What website can we buy them online??
I'll have a link in the description asap
where u get the blade setter from
www.vipbarbersupply.com/products/wahl-detailer-alignment-tool
but my heros came with the adjuster but the t wide blade wont fit in it
Nice i knew there was a reason i believed it didnt fit. I have two of them one is heros other is detailers. I obviously used the detailer version when i was used to the hero version. Thats why i was surprised in the vid.
Mines didn't come with a tool.
شكرا لك لهده المعلومات القيمة
Anybody have a link for the tool and the blade setter he used in this video? Mine didn't come with them and I can't find them on Amazon.
www.vipbarbersupply.com/products/wahl-detailer-alignment-tool
4:50...ha ha ha.....you can!! good laugh...what a triumph.
Point one I didn't get the luxury of getting that gap tool with my detailers but not trying to be a dick I basically stopped considering your advice the second you found out you could get the double wide blade in that tool
Cool
Does anyone sell this on ebay with euro plug..
The camera not focussing bugged me a little bit, work on that please!
Suavecito!