How to disassemble Bugatti Veyron 1/18 Scale by Autoart

Поділитися
Вставка
  • Опубліковано 1 гру 2024

КОМЕНТАРІ • 38

  • @SCDC-Channel
    @SCDC-Channel 4 роки тому +3

    Well done!

  • @LittleBigStory
    @LittleBigStory 4 роки тому +2

    Спасибо!
    Полезное видео!

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  4 роки тому +1

      Спасибо, что оставили свой комментарий

  • @NUEVAERA-
    @NUEVAERA- Місяць тому

    Olá... Trnho um veyron, porém o volante não está alinhado e as rodas da frente agarram ao virarem para os lados... Tem como alinhar o volante?

  • @monobear141
    @monobear141 3 роки тому +1

    Is it the same for the supers port, different diffuser and engine

  • @knightofsg
    @knightofsg 3 роки тому +1

    6:24 ...How does the steering wheel fits the column small bit, simply clicks in or was it glued, which I don't think so? The steering wheel to my Veyron has come off and don't want to dismantle the whole model car, just to fit the steering wheel back in its place. Thanks for the info.

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  3 роки тому +1

      the steering wheel was glued, but it didn’t have much glue, and thankfully because it would be more difficult to discover that for that reason the interior of the car doesn’t come out, you don’t need to dismantle the whole car, just put a little white glue on the column and put the steering wheel in the right position.

    • @knightofsg
      @knightofsg 3 роки тому +1

      @@PenrysCarsDiecast I see. Than I have to put some glue to tiny pin (the part that's visible) in the column and than I fit the wheel in... not much contact and hope it clips in without being glued to the whole steering column. Thanks for the update! 👍

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  3 роки тому +1

      @@knightofsg yes put glue to tiny pin (the part that's visible) ,your welcome and good job

  • @christiand910
    @christiand910 3 роки тому

    Have you disassembled an autoart 918 spyder weissach?

  • @hakimmyassoud5842
    @hakimmyassoud5842 3 роки тому +1

    Good vidéo 🤝 , you can disassemble pagani huarya autoart ?

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  3 роки тому

      thanks, I bought a disassembled one, so I'll do the opposite, make a video doing the assembly, maybe it can help

    • @hakimmyassoud5842
      @hakimmyassoud5842 3 роки тому

      @@PenrysCarsDiecast why not😉

  • @roguerodriguez1050
    @roguerodriguez1050 2 роки тому

    would you do this on the bugatti chiron?:)

  • @myminiaturemods4785
    @myminiaturemods4785 3 роки тому

    Pls let me know how you removed the door panels

  • @Sean-if7rp
    @Sean-if7rp 2 роки тому +1

    Removing the orginal wheels? Does the centre cap pop off then allow for removal? Does it permanently damage them? Great video btw

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  2 роки тому

      yes, after removing the center cap you can access to the screw, you need attention not to damage the part 😉

  • @Reading_Modeler
    @Reading_Modeler 3 роки тому

    Redone paint? The part that isn't white is supposed to be shiny?

  • @ramijamalmufti
    @ramijamalmufti 3 роки тому

    Hi
    Thank you so much for your effort.
    Please i need help how to diassmple 1/18 mclaren 720s autoart to swap wheels,
    Pleeeeeease man i tried many times and still can't detach it all 😭😭😭

  • @sahadv5396
    @sahadv5396 3 роки тому

    Could you please tell me how you replaced the wheels on your veyron

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  3 роки тому

      I designed and printed the rims in 3D to fit perfectly, but to remove the wheel, you first need to detach the center of the rim

    • @Sean-if7rp
      @Sean-if7rp 2 роки тому

      @@PenrysCarsDiecast Can it be easily reattached with glue?

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  2 роки тому

      @@Sean-if7rp yes, no problem is very easy

  • @sahadv5396
    @sahadv5396 3 роки тому

    Could you do a update for this model

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  3 роки тому

      at the moment no new advances, you can follow the same ones here: facebook.com/Penrys

  • @sahadv5396
    @sahadv5396 4 роки тому

    How much did it cost you to buy the model

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  4 роки тому

      today at least 250€

    • @sahadv5396
      @sahadv5396 4 роки тому

      @@PenrysCarsDiecast you bought it for $303 WHAT but it had damage why would you pay that much I got mine for way cheaper for that same color but no errors

    • @PenrysCarsDiecast
      @PenrysCarsDiecast  4 роки тому

      @@sahadv5396 no, i didn't understand it well, i bought it for 70 €

    • @sahadv5396
      @sahadv5396 4 роки тому +1

      Wow that’s is cheap how did you get it for that much

    • @sahadv5396
      @sahadv5396 4 роки тому +1

      For that price it’s a really good deal where did you get it from

  • @정영준-t6k
    @정영준-t6k 4 роки тому +1

    This is Autoart????