Best video yet guys! I’ve loaded tower cranes on trailers for 30 years and a 40 ton all terrain hyd cranes that didn’t have enough power left to drive up on a low boy without getting a run at it nobody wanted to do it so I jumped in if not for the good Lord looking out for me it would have never gotten on that low boy that day without killing somebody. This video reminded me of that memory and I thank you for it. I’ve meet many drivers like Bruce who knew how to do their job well like him. Willy your 2 years older than me I graduated in 1979. God bless you gentleman.
When dealing with tandem drive trucks lock the power divider in so all four axles drive. There should be an air switch on the panel labeled "Power Divider". Just flip the switch.
This was GOOD and I used to drive an old corn popper truck like that with a MTM mixer on it, 6-71 with a 9-speed fuller OD box. Wished it had a 13 under but you drive what's there. Ended up on a OLDER one with a 3208, a 5x4 tranny and a chain drive REX tub. Going old piece of plunder. Glad you got a drop deck to load on. Remain calm and God Bless!
Yesterday and today in Maine where I live yesterday was 44 below zero without the wind today it's even colder that's fahrenheit as well today feels like 50 below -12
Thanks for another great video, you guys make those truckers work for their money sometimes, After seeing this if I was wheeler walker JR, i'd right a song for these poor truckers titled "Jesus hates me" L.O.L. It's loaded nobodies' hurt and everybody got paid though, Being a guy thats half their size and can't get a cdl because of high blood pressure up here in Canada, it does concern me that some of these guys are played out tying the load on and look about ready to drop with a medical issue. The systems really messed up when they got a license, I can drive the truck/tie the load perfectly, but 1 piece of medical paper says no, It's even getting harder to drive tandem farm trucks that technically don't need a cdl to, I drive them quite often at the moment but that could stop with 1 more law change, farm semi's need the cdl already ! Take care guys
it's getting hard in the states Al these crazy laws made up by people that have never been in a truck in there life I've been driving for 45 years legal and more b4 I even had any kind of a license but good luck with your health from Va.
You ever heard or seen when a side wall on a tractor pops ????? Well if not let me just tell you it’s extremely violent. You never stab a tire in the side wall good way to seriously hurt or kill yourself
I rather prefer been in the field working with heavy equipment than been in an office. It makes me feel free and at the same time I'm enjoying the nature. To me it's priceless!!
Lard was used a lot for cooking over here in England Uk i the old days, then the food police said it so unhealthy. they came up with other types of oils for cooking with.
🤔 on the plains of Chicago we find Hank and Wally in their natural habitat. Lubing joints, joke telling and the hunt for the best cresent wrench. Will it start. Always great videos
Hank says: Wiley hang on a second here, I got some brake cleaner. Spray a little bit here. Hang on second here, Wiley, something not right here. On second thought, I should use the Cresent Wrench 😂
O'Reilly auto parts has a great seclusion of DIY roll on bed liners I did mine in my drive way and it only took me about 2 and half hours and it works great
Hey hank , I use this alot working on vehicles. Might be handy for you guys. Home depot."( 3.9 ft. x 12 in. x 20 in. Aluminum Slim-Fold Work Platform, 300 lbs. Load Capacity..) or something like this
18* with a windchill of -5*?? It's Sunday, 2/5 and it IS STILL -4* with windchills in the -20s and lower up here in upstate NY!! It's so cold here, the snowman in my neighbor's yard keeps asking for a blanket, hat scarf and gloved!! And it's supposed to get even colder tomorrow!!!
Boy that's one hell of a contraption I thought for sure one of you is gonna take a spill you need a small ladder or something to get around on that piece of machinery Well you guys did it you fired up another old piece of junk I hope you made some bucks on it thanks for the videos always a good time
Jokes time: "That's whatcha call driving it till the wheels fall off!!" ; "Man, that thing WAS sketchy...it was so sketchy, the police department made a drawing of it just in case!" 🤣🤣🤣 Good job fellas!! Thanks for sharing! God bless!
In answer to your question Lard is rarely used in cooking in Australia and Asia due to the high fat content and not good health! It is used in some recipes require lard or taste better with it.
Crisco is Vegi Oil. Not beast grease. A bit different. Check the label on the can or stick. Likely the false lady bugs that came into the country. Lady bugs are on plants, these almost look the same but IIRC, smaller but about the same color and black spots. They are bad. doing great there .
One thing I used to tell my newbies to our unit in the Afghan desert that would be duckin and diving for cover “ why it’s a good thing cause you made it hearing the bang or boom cause the one that gets ya your not gonna hear “so quit your being jumpy To check your turntable measure from ring to deck in three spots with arm out move and measure again and pray it’s all within an eighth to a quarter inch cause more it gonna fail and that bearing is big bucks
They do have Crisco overseas my wife is from Thailand and we go to the grocery store a lot when we’re there everything we’ve got here they’ve got there and more
🔧Dewalt socket set here➡️: amzn.to/3KU3D8V
Do you guys ever start old brockway trucks?
It's obvious you boys made Bruce a happy man. In the end I suppose bringing joy to others is what builds lasting memories.
He’s a great man. Thanks for watching
Given the target practicing; that truck has been God Blessed to have windows and radiator without holes.
Best video yet guys! I’ve loaded tower cranes on trailers for 30 years and a 40 ton all terrain hyd cranes that didn’t have enough power left to drive up on a low boy without getting a run at it nobody wanted to do it so I jumped in if not for the good Lord looking out for me it would have never gotten on that low boy that day without killing somebody. This video reminded me of that memory and I thank you for it. I’ve meet many drivers like Bruce who knew how to do their job well like him. Willy your 2 years older than me I graduated in 1979. God bless you gentleman.
From one bass player to another - thank you sir!
Right on. We truly appreciate that. Thank you very much.
you two must have had easy jobs in life to remember all them songs and jooks. lol. goods times getting them going and loaded. cheers guys.
This was a very interesting comical recovery !!! Yall are awesome brothers !!! Keep on keeping on lol !!!! Great to see yall again
Thanks for the laughs, the jokes, “this thing is making oil”, being good natured fellows, and stick fuel gauge.
Got to admit that Walley and Hank are the best at getting equipment to run no matter how bad the equipment looks they do get to running
I always try to keep Valve stem caps with the top to take out valve cores on each vehicle. It's a lot easier than using a drill. This was amazing!
Break the valve core duh!
This was an exciting episode…….I bout died laughing when you were “letting the air out of the tires”……thanks for the great content!!!!!!!
Thanks
Curley, Moe, and Larry live on!! That was fun.....
Your banter is harf the reason u watch,
When dealing with tandem drive trucks lock the power divider in so all four axles drive. There should be an air switch on the panel labeled "Power Divider". Just flip the switch.
This was GOOD and I used to drive an old corn popper truck like that with a MTM mixer on it, 6-71 with a 9-speed fuller OD box. Wished it had a 13 under but you drive what's there. Ended up on a OLDER one with a 3208, a 5x4 tranny and a chain drive REX tub. Going old piece of plunder. Glad you got a drop deck to load on. Remain calm and God Bless!
😁
“Me too, Hank.” I don’t know why but I cracked up when Wiley said that.
You might wanna look into a spray in truck bed liner. They are awesome
Yesterday and today in Maine where I live yesterday was 44 below zero without the wind today it's even colder that's fahrenheit as well today feels like 50 below -12
Enjoyed this video Hank and Wiley. Also liked the Intro music. It had my foot tapping.
Nice!
Poor willy he has to listen to Hank tell bad jokes and sing
🤣😂🤣😂🤣😂🤣😂🤣
Lol. I should charge him a cover fee to hang out with me!😂
Great 👍 watching your day loading on to low loader a pleasure to watch
Thanks!
Love the channel and the commentary. Looking forward to the F-350 updates.
WOW! Thank you so much! We appreciate that so much!
Thanks for another great video, you guys make those truckers work for their money sometimes, After seeing this if I was wheeler walker JR, i'd right a song for these poor truckers titled "Jesus hates me" L.O.L. It's loaded nobodies' hurt and everybody got paid though, Being a guy thats half their size and can't get a cdl because of high blood pressure up here in Canada, it does concern me that some of these guys are played out tying the load on and look about ready to drop with a medical issue. The systems really messed up when they got a license, I can drive the truck/tie the load perfectly, but 1 piece of medical paper says no, It's even getting harder to drive tandem farm trucks that technically don't need a cdl to, I drive them quite often at the moment but that could stop with 1 more law change, farm semi's need the cdl already ! Take care guys
it's getting hard in the states Al these crazy laws made up by people that have never been in a truck in there life I've been driving for 45 years legal and more b4 I even had any kind of a license but good luck with your health from Va.
Great content, glad to see this old loader come out of its slumber and go off to start a new life.
Chrisco Hampers are here in Australia and that was a good save Hank done on Wiley as he nearly fell off the truck! 🙂
Love HamiltonVille farms can't wait to get some merch
I enjoy your video and your sense of humor.
That look u made when they started shootin had me geekin that was hilarious 😂
Watching you guys sometimes it's like watching those old movies back in the day shake hands with danger
Laurel and Hardy? Lol
Hey Hank just to let you know that Wiley has the grey britches to
Your grey shirt ❤😂
Awesome video, Hank and Wiley appreciate you guys 👍
It's easier to puncture a tyer through the side wall than the steel and tread, all the best to yous
You ever heard or seen when a side wall on a tractor pops ????? Well if not let me just tell you it’s extremely violent. You never stab a tire in the side wall good way to seriously hurt or kill yourself
I wish you would find a 80's Franklin grapple skidder to start. I operated one early 90's. Uncle used a Timber Jack 240 cable up till mid 90's.
I rather prefer been in the field working with heavy equipment than been in an office. It makes me feel free and at the same time I'm enjoying the nature. To me it's priceless!!
You fellas sure do what ever it takes to get the job done great watch gentleman 👍👋🇨🇦
Lard was used a lot for cooking over here in England Uk i the old days, then the food police said it so unhealthy. they came up with other types of oils for cooking with.
Loved the video fellas. Y'all outa try out for America's got talent! God bless.
😂
See that the tag was Marengo county Al close to where I am. Great job on the recovery very challenging
It was awesome again to watch, and that just fit close very close 👌 and the tire trick was great. Did Bruce make it without any problems 🤔
He did👍
🤔 on the plains of Chicago we find Hank and Wally in their natural habitat. Lubing joints, joke telling and the hunt for the best cresent wrench. Will it start. Always great videos
😂
Good luck guys I think you are going to need it on this one
Hank says: Wiley hang on a second here, I got some brake cleaner. Spray a little bit here. Hang on second here, Wiley, something not right here. On second thought, I should use the Cresent Wrench 😂
Thanks for the video guys.... JJ...
What kinda of motor is in the truck?..
Nice video boys but the safety goes first nice job Good blesing❤❤
In Ireland we have a product called "Cookeen".Its like lard or shortening. I really enjoy all your videos and banter.
O'Reilly auto parts has a great seclusion of DIY roll on bed liners I did mine in my drive way and it only took me about 2 and half hours and it works great
down below the pond in australia we do have crisco cheers you guys are fun to watch
You should get spray liner for your Dodge pick up that will be better than the plastic
Hey hank , I use this alot working on vehicles. Might be handy for you guys. Home depot."( 3.9 ft. x 12 in. x 20 in. Aluminum Slim-Fold Work Platform, 300 lbs. Load Capacity..) or something like this
Take out the plastic bedliner and do a spray in liner. Garrenteed for life and doesn't warp like plastic does.
Great job lad’s 👍👍👍👍
Elvis is on the drivers rear outrigger February 23rd 2023.
Bet Ole Wiley is glad to see that big hunk-O-junk leave the lot! Good Job Guys.
good job guys, Darn Willey you got Hank dirt
Good Time Charlie’s Got the Blues 📻 Great song! TCB⚡️
🕺🏻
You did a good job crazy didn't load in it thank you
you guys are like laurel and hardy, keep up the great work and funny times. i now follow you on facebook.
Y'all done a fine job on that loader
LMAO, when Wiley gets hit by that handle "Oughh" and seconds later second hit! 😂
18* with a windchill of -5*?? It's Sunday, 2/5 and it IS STILL -4* with windchills in the -20s and lower up here in upstate NY!! It's so cold here, the snowman in my neighbor's yard keeps asking for a blanket, hat scarf and gloved!! And it's supposed to get even colder tomorrow!!!
Love you're vision of the work truck lol built a beast in your mind
Farts are really funny and makes me laugh all the time, but I also enjoy watching your show.
Boy that's one hell of a contraption I thought for sure one of you is gonna take a spill you need a small ladder or something to get around on that piece of machinery Well you guys did it you fired up another old piece of junk I hope you made some bucks on it thanks for the videos always a good time
You guys act like a father and son team very funny 😂😂😂😂😂😂
Hank while drilling tires, When your SKEERD SAY YOU SKEERD!!!🤣🤣🤣🤣🤣
I think I did 😂
Crisco equivalent here in the UK is Trex. Although I have never used it 😂
Glad you got out of the well !!
Them 2 old boys made me laugh watching them load that thing omg
Just wondering if you could have driven the truck bed up to the truck/ crane?
Jokes time: "That's whatcha call driving it till the wheels fall off!!" ; "Man, that thing WAS sketchy...it was so sketchy, the police department made a drawing of it just in case!" 🤣🤣🤣 Good job fellas!! Thanks for sharing! God bless!
It was nuts. Lol
That's quite the job you guys did I enjoyed your video I hope you make it home wherever it's going
In answer to your question Lard is rarely used in cooking in Australia and Asia due to the high fat content and not good health! It is used in some recipes require lard or taste better with it.
Crisco is Vegi Oil. Not beast grease. A bit different. Check the label on the can or stick. Likely the false lady bugs that came into the country. Lady bugs are on plants, these almost look the same but IIRC, smaller but about the same color and black spots. They are bad. doing great there .
One thing I used to tell my newbies to our unit in the Afghan desert that would be duckin and diving for cover “ why it’s a good thing cause you made it hearing the bang or boom cause the one that gets ya your not gonna hear “so quit your being jumpy
To check your turntable measure from ring to deck in three spots with arm out move and measure again and pray it’s all within an eighth to a quarter inch cause more it gonna fail and that bearing is big bucks
Minus 31 in Ontario Canada windchills minus 34 feb 3
Just goes to show you that even Elvis loves ladybugs
I'm from Lethbridge Alberta Canada and the cold 🥶 snap started in BC into Alberta alone the rockies and into the states.
Wish I could have one of these Prentice machines shipped to Malaysia at a cheap cost. Hehehe.
so what happen to the tire he was supost to bring?
Great content guys as always, keep up the great work.
Thank you
Hank, you need a service truck! And on a more serious note you should find a Goodall /Start all.
That dude never moved while they were getting the wood from the shed. 😂
What you need to do about your truck bed have a spray-in bedliner put in
Yes I do.
There is an episode on Doctor Who where the Doctor says " Just like a politician, unable to answere a Yes or No question"
Glad to see someone is saving the old gal autocar or Dimond rio?Rio? I'm surprised to see it's tired bones moving once again
Will it start? Log loader at ABANDONED mill hasn’t been cranked in YEARS!
ua-cam.com/video/6wyEszjYSkw/v-deo.html
Any idea if there going to fix it back up or parting it out?
I’m sure it’s gonna be parted out
You forgot your introduction in the beginning we are always so used to it
We have Chrisco in Adelaide, South Australia
Superb lads❤
Saw Elivis above the Rear Outrigger Leg & just below the Machine
I'm watching from Bermuda where it's 56F ! -- dats cold for us !!
I hear ya
Elvis in ta House!!!!!!!!!!!!!!
Hi Wiley. We're about the same age. If my Nannies saw me crawling over the engine bay like you did it would be the end of the world as we know it.
Get you some glasses and ear plugs. We want osha to see we tried. I’m dying 😂😂
Where in Florida are you located...Tom in so ga
that ole trucks got hendricks old school walkin beams u seem alot here in ky
They do have Crisco overseas my wife is from Thailand and we go to the grocery store a lot when we’re there everything we’ve got here they’ve got there and more
Hey if y'all come across any 2-53 or 3-53 Detroit diesel power units or generators I will buy them.
I got a 2-53 in a little John Deere dozer..needs a rebuild…parts are hard to find these days
those ladybugs/ladybirds,the red with black spots are said to be good luck if one lands on you. i also saw so that were not ladybirds.
their Japanesee beatles their Orange