2015 - 2022 Subaru Impreza, WRX, STI Radio Install

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Parts linked in the description below!
    Watch a full tutorial as a 2015 Subaru WRX / STI (non factory amplified) will have a new Pioneer AVH-2300NEX Touch Screen Bluetooth Radio Installed. NOTE: the 2016+ models have a slightly different dash bezel and radio harness. See below for those correct part numbers.
    This video applies to Subaru models for years 2015, 2016, 2017, 2018, 2019, 2020, 2021, and 2022. This video includes step-by-step on the installation process of the new Radio.
    Click here to see the aftermarket amplifier and subwoofer install video:
    • 2015 - 2022 Subaru Imp...
    Click here to see the front door speaker install on this WRX:
    • 2008 - 2021 Subaru Fro...
    Click here to see the rear door speaker install on this WRX:
    • 2008 - 2021 Subaru Rea...
    Click here to see an upgraded radio on this WRX:
    • My Subaru WRX Wireless...
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    2015 WRX/STI Parts List (Nissan type harness):
    *Metra 95-8905B Double DIN Dash Installation Kit: amzn.to/3hj6RST
    *Metra AX-TOYUSB USB Port Cable: amzn.to/3dUuUqk
    OR the iDatalink AUX / USB Retention Adapter: ebay.us/bLwcOr
    *Metra 70-7552 Receiver Wiring Harness (Non Harman Kardon System): amzn.to/2U255xD
    OR Metra 70-7553 Receiver Wiring Harness (With Harman Kardon System): amzn.to/35WXsv4
    *Datalink Maestro ADS-MSW Steering Wheel Control Adapter: amzn.to/3A8eAMa
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    2016+ WRX/STI Parts List (Toyota type harness):
    *Metra 95-8907HG Dash Kit (Silver): amzn.to/360xYNf
    *Metra AX-TOYUSB USB Port Cable: amzn.to/3dUuUqk
    *Metra 70-1761 Receiver Wiring Harness (Non Harman Kardon System): amzn.to/3z8PT1y
    OR iDatalink Maestro ADS-MRR Interface Module (With Harman Kardon System) amzn.to/35EJxto AND the SU2: amzn.to/3A97irv
    *Datalink Maestro ADS-MSW Steering Wheel Control Adapter (if you have the non-amplified version): amzn.to/3A8eAMa
    *Metra 40-LX11 Antenna Adapter: amzn.to/3hNV13O
    Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases
    NOTE: If you have the 2016+ Model and the Harmon Kardon factory system, the iDatalink Maestro ADS-MRR Interface Module needs the iDatalink HRN-RR-SU2 Harness adapter. This setup already retains the steering wheel controls, so no separate module required.
    If you have any questions, leave a comment below! Be sure to like and subscribe!

КОМЕНТАРІ • 45

  • @mikeloeven
    @mikeloeven Рік тому

    Thanks for this I am just so tired of the crappy Bluetooth connectivity and the interface safety lockouts on arbitrary settings buttons to the point I am looking to just rip this out and get an aftermarket

  • @guillermon21
    @guillermon21 Рік тому

    Great video

  • @cristofer1617
    @cristofer1617 5 років тому +3

    when you install this stereo model do the steering wheel controls work? and the multifunction screen (screen that shows turbo pressure on the board) that shows the information of the songs is still working?
    thanks

  • @daniel-availtree6498
    @daniel-availtree6498 3 місяці тому +1

    I did this but no sound came out after installing. I have the Harmon Kardon package. Please help

    • @peytonsanchez7200
      @peytonsanchez7200 Місяць тому

      You will need a bypass box, my old car had the bose premium speakers and needed this because these specialty speakers have their own amps and things like that

  • @kupsteddy
    @kupsteddy 2 роки тому

    I’m looking to change my oem on 2016 wrx base to a pioneer avh-4500nex. Could really use your help. I just bought the 4500 from a friend but it’s missing all the harnesses. Could use a walk through on the installation if you can.

  • @jacobwurst
    @jacobwurst 5 років тому +1

    What did you do with the bluish color wire that also had the aux jack that comes with the maestro. That’s the only thing I am confused about and the installation manual did not say anything about it. Thanks

  • @gmunidos2003
    @gmunidos2003 Рік тому

    I changed my head unit as well, however the locking mechanism on the key fob is not working. Any advice. I have a 2020 sti. The nee head unit is not the one on this video

  • @TheEricStein
    @TheEricStein 2 роки тому +1

    I feel like the microphone part lost me. Would the factory mic still work if you didn’t wire the aftermarket mic up the side and down through the roof?

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 роки тому

      Factory mic is on its own protected circuit and will not be retained when replacing the radio. You will need to add your own analog mic that comes with the radio.

  • @rforman9
    @rforman9 Рік тому

    Where can I get the micro bypass? I didn't see it in the parts list?

  • @Wmccoy03
    @Wmccoy03 5 років тому +2

    Just wondering how the mic quality was in that factory location? Trying to decide between there and the top of the A-pillar. If it sounded great I'll put in the extra work and run it to the middle.

    • @ProvoBeastAudio
      @ProvoBeastAudio  5 років тому

      It's not perfect, but it kept the clean factory look. You will get better results from top of the A pillar, but thats your call.

  • @Nsaaav
    @Nsaaav Рік тому

    followed this video for my 2015 wrx and the skip song button tries to change input but every other button works like its normally supposed to.. any suggestions?

  • @marcolopez1048
    @marcolopez1048 4 роки тому

    Can you do one for a 2017 STi? Not sure if it’s the same as this or not, would I be able to keep the rear view camera?

  • @tinman1222
    @tinman1222 5 років тому

    How many amps do you have installed? why so many RCA cables?

  • @lisetmiranda5015
    @lisetmiranda5015 4 роки тому

    where can you find that Metra AX-TOYUSB USB Port Cable for a 2015 subaru WRX, I can't find it anywhere?

  • @_nephron
    @_nephron 6 років тому

    Just bought a 17 wrx manual transmission with the same unit. Seems like it was professionally installed , buttons on steering wheel work correctly. But I am having some weird issues. Reverse camera tries to come on if i go from reverse to neutral instead of the opposite. And when it does come on its just a black screen. If i go into the menu and click camera then shift to reverse the signal is there and working correctly.
    Another thing is i cannot get the grayed out settings to be available, I put the e-break on and hold the break but still grayed out. I have tried pulling e brake disengage and re engage and still nothing.
    I have pulled the unit out and checked the back and everything looks connected correctly, do you have any suggestions what to look for, for these issues ? I really would like to be able to use android auto, I plugged a direct usb cable into the back to connect to my phone but i think it wants the e-brake on to start setup. Thanks !

  • @mikemartinez7058
    @mikemartinez7058 6 років тому

    Will all these parts work with a jvc KW-V320BT I have a 2015 sti no navi with Harmon kardon

  • @carbonoxx
    @carbonoxx 5 років тому

    apart from the metra 70-1761 do i need the 28 pin harness? non harman kardon also does the iDatalink Maestro ADS-MRR Interface Module work with non harman kardon?

  • @rager1969
    @rager1969 5 років тому

    Why does the steering wheel module tap into the factory harness wires and not the after-market harness wires? Also, why hasn't someone developed an adaptor to re-use the factory mic?

    • @chrisbilski3982
      @chrisbilski3982 5 років тому

      Sadly, no one has ever made an adapter to use the factory microphone in a Subaru due to the fact that the Subaru microphone is proprietary, now amplified, and has a different impedance than standard microphones used with aftermarket head units. This is my 2nd Subaru that I am getting ready to replace the factory radio in.

  • @tonygeorge3617
    @tonygeorge3617 4 роки тому +1

    Any idea if all of this will work with the Sony xav3000?

  • @jonahwilliams2428
    @jonahwilliams2428 5 років тому +1

    What did you do when the screen that displays the time and weather said to “check radio input”??

    • @ProvoBeastAudio
      @ProvoBeastAudio  5 років тому +2

      Pull the negative off the battery and let the car sit for 5-10 minutes. This will allow the computer to "forget" the radio ever existed.

  • @balfreroman6357
    @balfreroman6357 2 роки тому

    What dash kit is this? Mine was too small

  • @aj3nt
    @aj3nt 6 років тому

    Metra 70-7553 Did NOT work for my 2015 STi with HK system & factory nav. Could not plug into any of the factory connections.

    • @Ghostrunner55
      @Ghostrunner55 5 років тому

      is this legit, because i was thinking about going by the list provided

    • @michaelcamp4921
      @michaelcamp4921 3 роки тому

      Bro that’s a Nissan harness. Call up crutchfield customer service and get a harness. Also make sure to pay them the $25 for the plug and play harness wiring they do for you...no splicing

  • @brandondecker1881
    @brandondecker1881 5 років тому +1

    will the reverse camera still work?

    • @jonahwilliams2428
      @jonahwilliams2428 5 років тому

      It will work on the screen above the new head unit unless you buy another one and have it hooked up to your new head unit

  • @Wazza722
    @Wazza722 Рік тому

    Couldn’t use that in a 2022 wrx so why advertise it!

    • @ProvoBeastAudio
      @ProvoBeastAudio  Рік тому

      See the description for exactly what model years Impreza, WRX, and STI it fits.

  • @MrShortStuff
    @MrShortStuff 2 роки тому

    I have 2014-2015 WRX with factory Harmon Kardon system and installed the new Kenwood 9920DAB series with a issue of no sound at all.
    I heard this is common issue with the factory amp. Anyone know where I can buy a harness go make this work please?

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 роки тому

      We would recommend the iDatalink HRN-RR-SUI paired with the MRR to make this all work. *iDatalink Maestro HRN-RR-SU1 Wiring Harness Adapter: amzn.to/3vGCZVx
      *iDatalink Maestro ADS-MRR Radio Replacement Interface: amzn.to/35EJxto

    • @ProvoBeastAudio
      @ProvoBeastAudio  2 роки тому

      We used those parts here: ua-cam.com/video/J39vBsPJKEk/v-deo.html

  • @cell762
    @cell762 4 роки тому

    Where did you get the carbon fiber dash kit?

  • @jonathangriffiths4282
    @jonathangriffiths4282 4 роки тому

    Does the stock dimmer scroll control the brightness?

    • @ProvoBeastAudio
      @ProvoBeastAudio  4 роки тому

      Scroll dimmer, no, only dims when headlights are activated.

  • @carlosavalos9937
    @carlosavalos9937 3 роки тому

    How do you keep using the oem usb

  • @giovanniarboleda7316
    @giovanniarboleda7316 Рік тому

    What kit you use for the radio