Ask Adam Savage: Best Glue for Foam

Поділитися
Вставка
  • Опубліковано 5 жов 2024

КОМЕНТАРІ • 96

  • @tested
    @tested  2 роки тому +13

    Join this channel to support Tested and get access to perks, like asking Adam questions:
    ua-cam.com/channels/iDJtJKMICpb9B1qf7qjEOA.htmljoin
    Gorilla Clear PVC PrimaGlue: amzn.to/3xaQC3t
    Bob Smith Industries 5 Piece Set Cyanoacrylate CA Super Glue: amzn.to/3tdr6s5
    Disclaimer: Tested may earn an affiliate commission when you buy through the links here.

    • @thecloneguyz
      @thecloneguyz 2 роки тому +2

      Have you guys ever used a 'load-bearing' foam like np1 instead of an expansion foam meant for air?

    • @paulvamos7319
      @paulvamos7319 2 роки тому +2

      @@thecloneguyz I never thought of that! I usually use the lightest weight board possible and np board is usually heavier than I need when using 4x4 or 4x8 sheets (1/4 to 1/2). I like to design my own models (Ships, cars, planes, trains, space vehicles and houses/buildings) and I don't need more than a toothpick to help support it.

  • @johncage5368
    @johncage5368 2 роки тому +40

    Great glue question. Might even be worth to do a special on "How to reliably glue certain materials together and to other materials." especially for the Cosplay community where nails and screws are rarely an option in a costume.

    • @azraelf.6287
      @azraelf.6287 2 роки тому +4

      This. A glued to A is 'relativly' easy: find a glue for A and you're done. But what about gluing A to B?

    • @dawnelooney9875
      @dawnelooney9875 Рік тому

      Seriously the struggle is real with this! What adhesive for a+b maybe c

  • @jaydonbooth4042
    @jaydonbooth4042 2 роки тому +28

    I just love watching you answer questions Adam, I've watched the whole backlog on the channel and then re-watched them multiple times. I get excited every time I see a new one up. I'll definitely become a member once I have the budget for it!

    • @milk-it
      @milk-it 2 роки тому +1

      Me, too!

  • @thomasfsan
    @thomasfsan 2 роки тому +13

    I’d love a comprehensive guide on what glues and adhesives work for what materials. Should be its own video!

    • @PhilG999
      @PhilG999 2 роки тому

      I think that one would be a couple hours long! Or more! When I think about what all I have just here at home ...
      😃

    • @peterw8835
      @peterw8835 2 роки тому

      He has one in his book

  • @joermnyc
    @joermnyc 2 роки тому +7

    Remember as a kid me and my dad got into building model kits of cars, and Star Trek ships. The fun of figuring out that the orange smelling weld-bond “model” glue was actually pretty awful stuff and having to open the window for ventilation and get a fan to blow the off-gasses away from the work table in all kinds of weather.
    Still think the worst thing to avoid breathing was this paint stripper to remove a polyester guitar finish (paint store wasn’t sure what would work, so they gave me the most aggressive stuff they had!) I didn’t even bother with opening a window, and just did it outside in the yard on a nice day. It worked, but it also stripped off the sealer coat, which meant extra work. (Later on I learned it’s just better to sand this type of finish off since once you see the color coat is gone, you stop.)

    • @azraelf.6287
      @azraelf.6287 2 роки тому +2

      My rule of thumb if I don't know what solvent or stripper to use is to find the thing with the most warning labels, and go outside

  • @YearsOfLeadPoisoning
    @YearsOfLeadPoisoning 2 роки тому +21

    The earliest lessons I learned making stuff as a kid was knowing what kind of glue and paint would melt foam lol

    • @ipissed
      @ipissed 2 роки тому

      You wanted to melt the foam. 🤘

    • @azraelf.6287
      @azraelf.6287 2 роки тому

      @@ipissed probably the other way around. They tried to glue or paint something and the project started melting. Happened to me several times as well.

    • @ipissed
      @ipissed 2 роки тому +2

      @@azraelf.6287 Do you know what Styrofoam melted in gasoline is?

    • @azraelf.6287
      @azraelf.6287 2 роки тому +2

      @@ipissed that is the recipe for an outdoor toy.

    • @PyroFTB
      @PyroFTB Рік тому

      ​@@azraelf.6287a toy that saw a lot of use in Vietnam

  • @cosmicmousse
    @cosmicmousse 2 роки тому +3

    There's a method of debugging software called 'rubber duck debugging' or 'rubber ducking' whereby the person doing the programming talks through the code with a rubber duck. The rubber duck can't provide any help but the act of talking through the code is enough to find solutions to problems.

  • @keldricharts
    @keldricharts 2 роки тому +7

    Adam just Rick Rolled us

  • @milk-it
    @milk-it 2 роки тому

    Getting that feedback you don't want is critical in moving forward. After writing many theses at university I never forget a comment a professor gave me in an essay was: "You've got that meta-critical awareness of an Honours student I expected." If you're not going to question yourself, then someone else will. Nice lesson, Adam 🙂

  • @punishedprops
    @punishedprops 2 роки тому +2

    Never gonna let you down, Adam. =)

  • @aristotle_4532
    @aristotle_4532 Рік тому +1

    Most people are very traditional and minimally inventive, especially in the trades. It is amazing how faulty traditional techniques are and how little time it takes to improve them or discard them. If you are technically minded, expect to start improving and discarding within a couple of weeks. I have found this to be true at the early hobby stage of bookbinding, upholstery, etc, but also in more technical things like audio recording and signal processing. As an example, most people record a hot digital level regardless of the microphone and preamp combination, even though a hot level wastes dynamic range on the top without improving dynamic range on the bottom. They don't test the range of gain levels to find the minimum that achieves the maximum possible sound quality and how the gain is actually implemented.

  • @RobertGardnerEngineer
    @RobertGardnerEngineer 2 роки тому

    Once again, I find myself singing the praises of BSI Industries CA glue.

  • @milwaukeebrewers6337
    @milwaukeebrewers6337 2 роки тому +2

    I was making a 0 scale of my friends pizza shop and used insulation foam board and I put glue and took hours to dry. When I put like a base coat the foam melted after hours of measuring cm and marking and pressing to textured replicate bricks lol but I learned.

  • @EyesOfTheInternet
    @EyesOfTheInternet 2 роки тому +3

    Does he mean Bill Doran of Punished Props?

  • @HLMAX
    @HLMAX 2 роки тому +2

    Best foam glue I have used is E6000. Great stuff. Dries fast, if you treat it like contact cement, coat both sides and let it dry a bit. Also it is flexible and tough; will allow some give and takes abuses/impact.

    • @rcjbvermilion
      @rcjbvermilion 2 роки тому

      I've used E6000 on more things than I could shake a stick at. It's my go-to for anything that requires a little flexibility.

    • @waxenapple1195
      @waxenapple1195 2 роки тому

      I made the mistake of thinking E6000 was okay for polystyrene. It is not. I melted everything :(

  • @notmuggin8541
    @notmuggin8541 2 роки тому +4

    Hey Adam awesome video!!! I love your channel and content!!

  • @DconBlueZ
    @DconBlueZ 2 роки тому

    Thanks for the video, always enjoy watching!

  • @KyzerGB
    @KyzerGB 2 роки тому +1

    Super glue "gel" works best for foam. Used it to glue dreads onto my predator mask .

  • @DeltaNovum
    @DeltaNovum 2 роки тому +1

    Title made me think Adam would let us know what kind of glue he likes for other kinds of foam. Like EVA or XPS, but alas. Next time it would be great if you where to add the kind of foam you're talking about Mr. Savage?

  • @hamishmcfarlane9931
    @hamishmcfarlane9931 2 роки тому +1

    Dude! I was just wondering how to glue some foam

  • @AngelicRain
    @AngelicRain 2 роки тому

    Getting hot here on the west coast of Canada too xD Love your channel Adam! You are the best! :D

  • @KaPH33n
    @KaPH33n 2 роки тому

    It's been over 100 lately up here in Sacramento. Sometimes I do miss the bay area non-seasons.

  • @thecorinthianguy
    @thecorinthianguy 2 роки тому

    Bill Doran is an excellent craftsman!

  • @MorningDusk7734
    @MorningDusk7734 2 роки тому +1

    I was crafting a snow globe, got careless, and forgot to test spray a piece of my material to see how my waterproofing spray would react to the material. It dissolved on contact.

  • @thecorinthianguy
    @thecorinthianguy 2 роки тому

    On technic: sometimes we stand on the shoulders of giants! I'm working on a Muppet build and was GOBSMACKED to learn that Henson had his OWN STITCH to hide seams and it's perfect!

  • @robbystanley2002
    @robbystanley2002 Рік тому +1

    good stuff, adam! any suggestions on what is best for gluing eps or xps foam layers together when laminating to form a larger block for sculpting? so it needs to hold and easily be cut through using a hot knife, curry comb, or other styrofoam sculping materials. the top two recommendations i've seen so far are great stuff (the red can) and glidden gripper. however, ppg bought out glidden and from what i've read they adjusted the formulation and ppg gripper isn't nearly as good or reliable for this job. so, those with actual experience in this specific application, what is your go-to adhesive?

  • @DiolitoDoSudoeste
    @DiolitoDoSudoeste 2 роки тому +1

    Não acredito que achei o canal do Adam, na verdade nem sabia que ele tinha um, eu sei que ninguem vai entende o que eu to escrevendo, mas, lembro de assisti os caçadores de mitos de segunda a sexta, acho, na TV Cultura, quando era criança, e agora aqui no youtube, me deu uma nostalgia agora kkkk

  • @BlackSoap361
    @BlackSoap361 2 роки тому +2

    How often do you decide that using the actual item would have been easier or cheaper than making a prop?

    • @googiegress
      @googiegress 2 роки тому

      He sort of answered this on another Q&A. I recall the question was something like "when do you pay someone else to make something vs. making it yourself", which isn't quite the same, but the analysis is similar: how much do you value your time, and was the making valuable to you for other reasons (enjoyment, skills building).
      Now that I'm thinking about it, you should also consider the durability of the thing; an animal cage will be strong enough to hold an animal (and presumably a child climbing on it) while a prop cage probably isn't. Hanging an item on a wall you might prefer a lightweight prop vs. a heavier real version. Real items with an expiration date are impossible to store, so if you want eggs it should be clear whether you need good-looking prop eggs or if you can get away with a dozen cheap grocery store eggs for your one-off photo shoot. Does it need to be breakable by actors, in which case a real version would be more expensive and also need to be modified for easy and repeatable breakage, vs a bunch of prop versions.
      And then, do you want a usable version of the thing in the future? You could make a prop table for a medieval feast scene using a tablecloth over plywood and some rough posts for legs. But you're not keeping that "table" afterward. If you made a really nice border around the front, and heavier planks across the top, and then just use a table runner so it shows off the wood, then you could maybe reuse those elements later or even reuse the whole table for a workshop or kitchen.
      Obvs I can't speak to what Adam would have answered.

  • @peckenstein
    @peckenstein 2 роки тому

    I'd love to see a collaboration between Bill and Adam. Bill can foamsmith a prop, and Adam can embellish, paint, weather and finish it.

    • @tdhickman
      @tdhickman 2 роки тому +1

      They worked together on the One Day Build for a Foam Ringwraith Gauntlet but they should definitely collab again!

    • @peckenstein
      @peckenstein 2 роки тому

      @@tdhickman you're right! I forgot about that. Seen so many videos it's hard to remember them all. Haha

  • @00fluxone
    @00fluxone 2 роки тому +1

    Gorrilla glue, foam safe CA, shoogoo - all depends on application (i build rc planes and tried them all)

    • @scottmantooth8785
      @scottmantooth8785 2 роки тому +2

      *just remember that Gorilla glue is NOT intended to be used on hair braids to make them more durable...bad things happen...especially to the scalp...so best not to use it in that manner*

  • @joachimkarstens9769
    @joachimkarstens9769 Рік тому

    so, is "weldbond" and "pvc glue" different things? or just different names for the same thing?

  • @fakingitwithstyle
    @fakingitwithstyle 2 роки тому +1

    what a shoutout to @punishedprops!

  • @jamesbarisitz4794
    @jamesbarisitz4794 2 роки тому

    Now I have to check out Bill Durands channel. ✌ 😃

  • @ellafoxoo
    @ellafoxoo Рік тому

    When in doubt: ask Bill. Got it XD

  • @TorturdChaos
    @TorturdChaos 2 роки тому

    I have to wonder if the Sintra you had trouble glueing was coated for screen printing or flatbed printing.

  • @Electronics-Rocks
    @Electronics-Rocks 2 роки тому

    In the UK it has been 40.3 °C or 104.5 °F

  • @AnnaAnna-uc2ff
    @AnnaAnna-uc2ff 2 роки тому

    Thanks.

  • @RonanFrost
    @RonanFrost 2 роки тому

    What about bonding mixed materials? Eg, I have gloves that used rubber backing on velcro strips, and the bond let go. I need something to re-bond them, but remain flexible.

  • @desiree1433
    @desiree1433 2 роки тому

    It’s been 106 here in KS

  • @sleepingninjaquiettime
    @sleepingninjaquiettime 2 роки тому

    I must be in the right part of northern California considering we've had a 60 degree (f) summer.

  • @joeselzer850
    @joeselzer850 Рік тому

    what glue will work to glue neoprene rubber to aluminum sheet/plate?

  • @FeedbackGuy1
    @FeedbackGuy1 2 роки тому

    Yo somebody turn Adam Savage into a borderlands character. That would be lit.

  • @mostlymissiles
    @mostlymissiles 2 роки тому

    I use foam tac or hot glue

  • @TheChar39
    @TheChar39 2 роки тому

    Foam Tack for EPP.

  • @starhawke380
    @starhawke380 2 роки тому

    Being willing to discuss a plan of action with another person and then admit that it wont work out brings to mind a quote I remember hearing someplace before... Failure is always an option...
    Speaking of glue, do you ever find yourself buying glue and think to yourself, Im tired of always saying C.A. glue... Im buying SUPERglue this time!

  • @JoseMercado-od6jk
    @JoseMercado-od6jk 2 роки тому

    Need your help for a project

  • @TheNewton
    @TheNewton 2 роки тому

    6:13 baking soda gusset
    What does that mean? Is that when joining edges
    If it's also for when laying pieces flat to join them I don't get that method.

    • @googiegress
      @googiegress 2 роки тому

      Yeah I was imagining the use-case for a model or diorama builder who needs to laminate several sheets to build up terrain height, so glue between to join them. When you pour baking soda on the CA glue it hardens pretty quickly, right? I haven't tried it yet. But it would be a quick sprinkle-and-slam application to get them together fast enough.
      I imagine it would help a lot more when joining small pieces onto a larger piece, because you want high strength per surface area. Maybe when doing a butt joint for say the four walls and roof of a house, dab extra glue inside on the joints and sprinkle baking soda in there.

    • @googiegress
      @googiegress 2 роки тому

      @@-XtraCredit- See this is what Adam was talking about in the video. If I hadn't said my dumb way of thinking about it, I would have never encountered your more sensible way to do it.
      Let's talk about the bonding though. Do you think there's an issue where after bonding, one piece ends up with more powder and the other side more glue, and the glue doesn't migrate fully through the powdered side to reach the foam? Or is that not really a problem?

  • @4EntertainmentOnly
    @4EntertainmentOnly 2 роки тому

    With that apron your wearing...do you often drop everytthing if you bend over ...I keep doing that with my apron that i made

  • @king2kx
    @king2kx 2 роки тому

    it was 101 in NYC the other day 🥵

  • @valiantwarrior4517
    @valiantwarrior4517 2 роки тому

    Thanks for sharing your wisdom, experience, and excitement, Sir Adam.
    Just want to say, other than your hair being a bit lighter, you look the same as you did many years ago when my kids and I would watch you on Mythbusters. Do you have access to a secret youth potion?

    • @googiegress
      @googiegress 2 роки тому +1

      Continuing to work really helps! ;)

  • @anthonyvincent9990
    @anthonyvincent9990 2 роки тому

    if its not something that has to be inspected for its bond. use the clear but it it does get the purple stuff. on your pvc glue. and yes Adam is right its like model glue on steroids. to the 10x.

  • @gorgonzola86
    @gorgonzola86 2 роки тому

    Have we been rickroled at 1:40 ?

  • @shinigami5732
    @shinigami5732 2 роки тому

    Hey Mister Savage where can I get the stranger things theme Savage shirts

  • @pedersenist
    @pedersenist 2 роки тому

    Or best foam for glue🧐

  • @hellboundrubber4448
    @hellboundrubber4448 2 роки тому

    Adam correctly described the study and development of Techniques through various results, that's what we call Technology. The most misused word of the Future. Ironic.

  • @gregcollins3404
    @gregcollins3404 2 роки тому

    If it melts the parts, then it's called cement.

  • @williamlosch
    @williamlosch 2 роки тому

    Bill who? Durant, Doran?

    • @Brownstone31
      @Brownstone31 2 роки тому +3

      Bill Doran aka Punished Props

  • @dragonpjb
    @dragonpjb 2 роки тому

    Did you ever meet Jamie's horrible pet spider?

  • @DavidM-um2uk
    @DavidM-um2uk 2 роки тому

    I will bend like a reed in the wind...

  • @BlueBeetle1939
    @BlueBeetle1939 2 роки тому +1

    Gasoline

  • @captaindunsell8568
    @captaindunsell8568 2 роки тому

    Hummmm … be reasonable, do it my way.

  • @VincentFischer
    @VincentFischer 2 роки тому

    UHU Por

  • @beans1240
    @beans1240 2 роки тому +3

    I like turtles

    • @beans1240
      @beans1240 2 роки тому

      Also this is the earliest I've ever been to one of these videos.

  • @kymmoulds
    @kymmoulds Рік тому

    Sorry I thought that it would include a demonstration of gluing a piece of foam which it didn't. THUMBS DOWN!!!

  • @wuckyt
    @wuckyt 2 роки тому

    Hey

  • @chaosbuilder1531
    @chaosbuilder1531 2 роки тому

    Hi

  • @chaosbuilder1531
    @chaosbuilder1531 2 роки тому +1

    On pc, go to any youtube video, qnd remove the "h" from "watch" in the link, and press enter.
    It is worth it, trust me

  • @DolfoLicks
    @DolfoLicks 2 роки тому

    0:07 - THEY say
    2023 - adam savage goes incognito in san frascisvo pride parade

  • @boobon4602
    @boobon4602 8 місяців тому

    On the MB episode of the diver in a tree the helicopter scoop was blamed. there were 2, the scoop and the pump. You need to look up the Martin Mars bomber. A WW2 Sea plane that was converted to to scoop up water through a large scoop too fill the bay and then to dump the water through a rear door. A snorkler would have no hope if this beast swooped in for water. Hence, diver in a tree