Reduce Waste by Adding a Laser to Your Sawmill

Adding a Apinex laser to my Woodland Mills HM 130 Max Sawmill
Here are the 3 components used:
AGLL2 20mw: www.apinex.com...
BRH 20mm: www.apinex.com...
PS-3: www.apinex.com...
Check out more of our Saw Mill videos here:
• Sawmill and lumber pro...
Check out the Rockhill farm Facebook group here:
/ 1270496403596230
@woodlandmills @woodlandmillscustomers5348
#sawmill #discoverthewoodland #woodlandmills
Rockhill Farm is a daily equipment and rural living blog. We mainly focus on equipment and working outdoors.
I really appreciate you taking time to watch this video. If you enjoy this type of content Check out some of the following links to support our channel.
If you are interested in a rock Hill Farms T-shirt check out our merch store
rockhill-farm....
Please subscribe to our channel here: / rockhillfarmandhomes
Follow on Facebook at
/ rock-hill-farm-1020506...
You can now support the channel by buying us a coffee at the following link:
www.buymeacoff...

[@RockhillfarmYT]

Here are the 3 components used:
AGLL2 20mw: www.apinex.com/ret2/agll25an.html
BRH 20mm: www.apinex.com/ret2/brhan.html
PS-3: www.apinex.com/ret2/ps3an.html
Check out more of our Saw Mill videos here:
ua-cam.com/play/PLmYnhJtNUq7cxcDizOh4LbhabyvbU1uAN.html
Check out the Rockhill farm Facebook group here:
facebook.com/groups/1270496403596230/
@woodlandmills @woodlandmillscustomers5348
#sawmill #discoverthewoodland #woodlandmills
Rockhill Farm is a daily equipment and rural living blog. We mainly focus on equipment and working outdoors.
I really appreciate you taking time to watch this video. If you enjoy this type of content Check out some of the following links to support our channel.
If you are interested in a rock Hill Farms T-shirt check out our merch store
rockhill-farm.creator-spring.com/listing/rockhill-farm-logo
Please subscribe to our channel here: ua-cam.com/users/Rockhillfarmandhomes
Follow on Facebook at
facebook.com/Rock-Hill-Farm-102050688356056/
You can now support the channel by buying us a coffee at the following link:
www.buymeacoffee.com/rockhillfarm

[@Cowboy_Steve]

Howdy Brock! I can see where that would be pretty useful. Good job and thanks for sharing 🤠

[@frankdrahos8569]

Good job Brock. I’ve been watching Sandy for a couple of years now. He is a wealth of information about sawing.

[@RockhillfarmYT]

Agreed. He gets a lot done building with fresh cut lumber

[@ricklarade3593]

sandy is the man!!!!

[@throngcleaver]

I love that idea, Brock! Thanks!

[@kimscooterjamieson]

Seen you on think media class. You are amazing. So many great points and helpful tips. Can’t wait to watch your content. Much love from our channel. ❤

[@RockhillfarmYT]

Thanks

[@marvindiamonjr.9631]

Thanks, Brock! I watch Sandy's channel, too. Been thinking about that laser for a while now. I'm not sure if I'm quite ready for something like that just yet. Sometimes I just like to keep things simple. That's why I got the sawmill in the first place. It was simpler than free hand cutting lumber with a chain saw. Everything just seems so expensive these days, so I was wondering if you could do a video on whittling toothpicks with a jackknife you found. I should be able to fit that into my budget! Just kidding, of course, but not about how expensive everything is these days. You just keep on making videos, and I'll keep watching them. You'll make a little money, and I won't spend any. I can see that we'll make a great team!

[@RockhillfarmYT]

I don’t have them whittling skills

[@bretchance9365]

Great t-shirt!

[@RockhillfarmYT]

Thanks

[@MrjackieG]

Most don't work well outdoors on a sunny day. The line disappears after a few feet.

[@paulcasefarms9933]

On video you can see that laser real well. Daylight may be a better test?

[@RockhillfarmYT]

I’ve got a video call at noon today and when that’s over I’ll send you a message

[@andrewupson2987]

Might be worth putting some rubber between the bracket and the saw cover to isolate it/dampen the vibrations. When the saw is running that laser is dancing all over the log. That way you don’t have to stop the blade to get a useful sighting from the laser. Or if there’s a place you could mount the laser that isn’t subject to the vibrations but still gives a good sighting line.

[@toddcaskey9984]

Morning

[@jefffrancis6824]

👀

[@BAAMRanch]

I wish I lived in a place that had trees, lol... texas panhandle here, and there ain't a tree is sight

[@HarryVonhoene]

Tape magnet won't last long!

[@RockhillfarmYT]

Yeah, at the end, I went ahead and screwed it to the mill

[@dustdevl1043]

The laser should pay for itself in blades and time savings.