Specna Arms SA-f01 Flex line review

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • This time i'm reviewing another airsoft m4. this time its the SA-F01, Specna's latest flex line of airsoft rifles. The flex line is designed for people who want to get into the airsoft hobby by making an afordable yet decent rifle for people to use. Here we look at the SA-f01 but there are other models available (SA-f02 & SA-f03) but are these good airsoft beguinner guns?
    Don't forget to subscribe
    / @dtwairsoft
    DISCLAIMER:
    This Airsoft channel is an educational one where the equipment I feature is only used for filming and airsoft gameplay that is done in a safe and controlled enviroment.
    NONE OF THE ITEMS FEATURED ON THIS CHANNEL SHOULD BE USED OR EXPOSED OUT IN PUBLIC, AND SHOULD ONLY BE USED AT A PROPERLY INSURED AIRSOFT SITE.

КОМЕНТАРІ • 52

  • @Ndbike68
    @Ndbike68 Рік тому +6

    i will buy this gun for my bday, thank yo dude
    i was gonna buy some sketchy plastic thing but now i know

  • @raizenkishin4810
    @raizenkishin4810 Рік тому +3

    recently got this Airsoft 2 Weeks ago, its my first Airsoft Rifle, Buttstock was loose. the Magazine either won't feed the pellets properly or keeps miss-firing, max and min hop up was Hard Low Left at 15 Feet and 45 Feet. and already passed my return day I should have tested it then and there. I guess learning it the hard way and hopefully when it gets inspected it can be fixed.

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому +1

      With the mag (I know it sounds silly but just trying to eliminate all possibilities) is it fully wound as in you keep winding after the bbs get to the top of the magazine? Also have you adjusted your iron sites front and rear? I would also check the hop rubber and see if it's actually pushing down with the hop all the way on. That's what I would check first

    • @raizenkishin4810
      @raizenkishin4810 Рік тому +1

      @@DTWAIRSOFT I will check again today, I did wind up the magazine BBs but I think I forgot to re-wound it after firing some of them. I have been adjusting the Sights as best as I can remember just like a real M16A2 but also trying to remember this is an airsoft. I would not know what a Hop Rubber is though. I will try today. Thank you for the advice!

    • @Sidonio5
      @Sidonio5 8 місяців тому

      mine dont have feed problems. the unique big problem is the precision, but its because the rubber buck its fixable. and sometimes when you spam the singlefire the gun stuck and you have to put auto and return to single

  • @cmoawsh5532
    @cmoawsh5532 Рік тому +3

    did you know where did we find the picatini rail for the hand guard ?

  • @Arkt1sMan
    @Arkt1sMan 4 місяці тому

    i have one of these, I have had trouble with the semi auto response. The trigger sometimes just stops working, and sometimes it doesnt feed, But i believe its the magazine. But aside from that its a good gun, i recommend

  • @storm1us
    @storm1us 3 місяці тому +1

    I don't know if this makes sense but is it the stock magazine that wobbles or would any magazine wobble too? Is this a good option to buy or is there a better one in the same price range?

    • @jeremybenoit759
      @jeremybenoit759 2 місяці тому

      I expect that maybe wrapping the magazine at the top with some duct tape or something could help stop any potential wobble.

  • @DOOM-fist
    @DOOM-fist 8 місяців тому +1

    Brought mine today it’s my first

    • @DTWAIRSOFT
      @DTWAIRSOFT  8 місяців тому +1

      I hope you enjoy it

  • @chrismoore6362
    @chrismoore6362 8 місяців тому +1

    Is this a Picatinny Rail System for the front grip?

  • @slrchanel4233
    @slrchanel4233 10 місяців тому +1

    Could you use this at your field and should I use this or a hi cappa pistol at your feild

  • @_kraken117
    @_kraken117 2 місяці тому

    Just bought one, feelin' good👍

  • @johnnystacks9468
    @johnnystacks9468 4 місяці тому

    Just picked on up recently, great review!

  • @mf-doon
    @mf-doon 5 місяців тому +1

    I'm pretty new to airsoft and I don't know what gun to buy, would you recommend this one or something else?

    • @-navi5238
      @-navi5238 4 місяці тому

      Specna arms EDGE are much much better. It’s the only gun I’d buy from specna.

    • @mf-doon
      @mf-doon 4 місяці тому

      @@-navi5238 yeah, the only problem is the edge guns are ~£100-200 more expensive than flex, which makes me think this has the most bang for it's buck. i could be totally wrong though.

  • @martynassavickas1353
    @martynassavickas1353 Рік тому +1

    Can you plzplzplzplz make a video on how to remove the rail? Im planning on changing it to an mlok rail

    • @itzyeanimations8748
      @itzyeanimations8748 Рік тому +3

      Get the specna arms flex 03 then, it's the exact same gun, but with mlok

    • @itzyeanimations8748
      @itzyeanimations8748 Рік тому

      Get the specna arms flex 03 then, it's the exact same gun, but with mlok

  • @timothee8147
    @timothee8147 Рік тому +1

    What battery should i buy and how long should i load it?

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому

      Either a 7.4v lipo or a 9.6v NiMH battery will be fine in this. Charging time will depend on the charger you have for the battery

  • @cheapeatsasia
    @cheapeatsasia Рік тому +1

    Is it threaded? Can it take a 14mm tracer?

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому

      Yes it has got a 14mm ccw thread on the outer barrel

  • @ajwebb8259
    @ajwebb8259 9 місяців тому

    What rails will go on the F01

  • @user-lz4mn2hs3j
    @user-lz4mn2hs3j Рік тому

    idk what to buy as a first gun. CM011 aka G36 rep or this gun
    Price the same +-

  • @upforadventures98
    @upforadventures98 7 місяців тому

    What type is the rail? And how do I find attachments for it?

    • @DTWAIRSOFT
      @DTWAIRSOFT  7 місяців тому

      They are picatinny rais, you can find attachments in for these at most sites and even some stuff on Amazon

  • @wardsnertmaster1152
    @wardsnertmaster1152 Рік тому

    what spring did you use by the chrono

  • @ItsMe_y_t
    @ItsMe_y_t 2 місяці тому

    Whats the rps??

  • @Rowc1120
    @Rowc1120 8 місяців тому

    Can it run li-ion batteries?

  • @Anonymous-sf8sb
    @Anonymous-sf8sb Рік тому

    Do you need to buy the battery separately

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому

      Yes these don't come with a battery

    • @Anonymous-sf8sb
      @Anonymous-sf8sb Рік тому

      @@DTWAIRSOFT what battery should I buy

    • @AV64422
      @AV64422 Рік тому

      @@Anonymous-sf8sb a 7.4v or 9.6 nimh battery

    • @Jack1Roland
      @Jack1Roland Рік тому +1

      @@Anonymous-sf8sb I bought a 7.4 Lopo and the fire right is kinda sluggish but it’s fine, buy something like a 9.6 or a 11.1 Lipo battery

    • @RRagnark
      @RRagnark 6 місяців тому +1

      11.1 will burn it and sk wil 9.6 most likely buy a 7.4v

  • @stijnVDA1994
    @stijnVDA1994 Рік тому

    how is the mag compatibility?

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому +2

      Nuprol, TM, ares seem to work well G&g sometimes work and Battle axe again can be hit and miss with this

    • @stijnVDA1994
      @stijnVDA1994 Рік тому

      @@DTWAIRSOFT do the rest don't work? Or just not in a position to test them?

    • @DTWAIRSOFT
      @DTWAIRSOFT  Рік тому +1

      @@stijnVDA1994 Thoes are the only ones i had on me at the time to test

    • @stijnVDA1994
      @stijnVDA1994 Рік тому

      @@DTWAIRSOFT i see, understandable.

    • @stijnVDA1994
      @stijnVDA1994 Рік тому

      Might look into this one or one from the core line🤔

  • @Mx45-fx8gu
    @Mx45-fx8gu 7 місяців тому

    How do you put the battery in

    • @DTWAIRSOFT
      @DTWAIRSOFT  7 місяців тому

      Push the two fins at the back of the butt pad for it to come off, that will givw you access to the wire to pug in the battery