There's no way I could do this job. Whatever those little animals are that are stacked on top of each other on that boat they gross me out. So my hat's off to you and I'm proud of you for doing this job for people. Like I said there's no way I could do it.
Please list all of the tools and what they look like for the fantastic prop shine you did. I hit it with a wire brush but daaaang, those prop blades were shimmering in the water! Nice job. Next time, film what you are doing from above the water, when you are grabbing tools from the dock or boat.
I’m pleased there’s someone to do this work and not me. These creatures absolutely disgust me so there’s not a chance I’d be under water with them. Makes me shiver 😅 Do they move on to the next hull, turtle, rock after you pull them off of this one?
Thanks for watching. The coral worms and other underwater biological fouling will float to the bottom to be eaten by the bottom feeders such as snails and crabs. If the water is above 75 degrees Fahrenheit, there are always more organisms floating around in the water that attach to the hull within days and begin growing.
Hey brother I'm planning on starting a little business cleaning hull etc just wanted to get a rough idea of how much you charge per boat or suggest any tips would be much appreciated. I've got my open water ticket so I can use tanks.
The rate for hull service varies depending on where you are located. I recommend monthly service only, and if a potential client wants a hull cleaned that has not been serviced in a number of months, then multiply the monthly rate by the number of months since last service, charge accordingly. To be able to provide the highest level of service and to stay on top of any corrosion issues and fix them before they cause damage to underwater metals, it is important to go under monthly. Two or more months of neglect may lead to costly damage and repairs. Also be sure to document everything each time you service a vessel. The diver and boat owner should know exactly how long each anode lasts, when the anodes were last replaced, the condition of the antifouling, if there is any active or past corrosion, are all bonding wires connected and in good condition, etc..
I see this is at least 1 yr old, but I figured I'd comment as well. I'm thinking about a boat cleaning business as well in the Tampa/clearwater area. Open water certified as well. Any tips? Pointers?
I couldn't do it I'd be so afraid something's going to sneak up on me in my mind you're in the ocean you're part of the food chain it's gives me the willies just thinking about it
I truly can't tell if you're actually this dumb commercial diving is also professional diving either way if you're paid you're considered a professional literally google "What is a professional diver" it'll save you a lot of embarrassment in the future. Maybe you're too young to know that but you should have figured it out at least an hour ago when I told you to look it up but now you're just embarrassing yourself. It is entertaining for sure don't get me wrong life would be very boring without dumb people.
There's no way I could do this job. Whatever those little animals are that are stacked on top of each other on that boat they gross me out. So my hat's off to you and I'm proud of you for doing this job for people. Like I said there's no way I could do it.
Wow thanks for the video, I enjoyed learning what all goes into barnacle cleaning. Keep up the great work.
Absolutely great, satisfying work, very professional 👍👍👍
Ver cool, thanks. Just getting into sailing here in the PNW and now I see why it takes as long as it does. Hard work well done!
Thank you. Thanks for watching.
this is good to see! i did it holding my breath on the upper bits, scuba gear is a cool thing to have !! 😊
Very nice job mate, I'm waiting on my new Hookah to arrive then I'll be doing the same to my own boat.
Wow, you are really good at what you do!!! Thanks for sharing! 🏆🏅👍😁
Bravo 👏 Bravo 👏 Bravo 👏 Excellent jobs guys. You both rock 🪨
There's only 1 of me but thanks.😎
Please list all of the tools and what they look like for the fantastic prop shine you did. I hit it with a wire brush but daaaang, those prop blades were shimmering in the water! Nice job. Next time, film what you are doing from above the water, when you are grabbing tools from the dock or boat.
Yeah that is a service I don’t mind paying for!! Too many Bull and Tiger Sharks in Florida!
I’m pleased there’s someone to do this work and not me. These creatures absolutely disgust me so there’s not a chance I’d be under water with them. Makes me shiver 😅 Do they move on to the next hull, turtle, rock after you pull them off of this one?
Thanks for watching. The coral worms and other underwater biological fouling will float to the bottom to be eaten by the bottom feeders such as snails and crabs. If the water is above 75 degrees Fahrenheit, there are always more organisms floating around in the water that attach to the hull within days and begin growing.
How much u charge for that job
Is it easier under water for the barnacles to come off?
Biological fouling on boat hulls is hard to remove, both above water and underwater.
Very nice job.
lol am a little surprised there aren't a thousand small fish there enjoying the buffet. And of course some larger fish enjoying the sushi!
Hey brother I'm planning on starting a little business cleaning hull etc just wanted to get a rough idea of how much you charge per boat or suggest any tips would be much appreciated. I've got my open water ticket so I can use tanks.
The rate for hull service varies depending on where you are located. I recommend monthly service only, and if a potential client wants a hull cleaned that has not been serviced in a number of months, then multiply the monthly rate by the number of months since last service, charge accordingly. To be able to provide the highest level of service and to stay on top of any corrosion issues and fix them before they cause damage to underwater metals, it is important to go under monthly. Two or more months of neglect may lead to costly damage and repairs. Also be sure to document everything each time you service a vessel. The diver and boat owner should know exactly how long each anode lasts, when the anodes were last replaced, the condition of the antifouling, if there is any active or past corrosion, are all bonding wires connected and in good condition, etc..
I see this is at least 1 yr old, but I figured I'd comment as well. I'm thinking about a boat cleaning business as well in the Tampa/clearwater area. Open water certified as well. Any tips? Pointers?
How do u see threw all that that would be hard 4 me
It's hard for me too.
What kind of sandpaper are you using on the propeller blades?
Sunmight is good sandpaper. You can also use sanding screens and coarse grit belt sander sandpaper. I love shiny metal!
What grit was it?
I couldn't do it I'd be so afraid something's going to sneak up on me in my mind you're in the ocean you're part of the food chain it's gives me the willies just thinking about it
do do whales get barnacles on them
Yes. The barnacles travel by attaching to whales.
This video needs an awesome soundtrack.
U need a good pair of gloves
Your a barnacle scraper not a professional diver. Anode not installed properly or in the right place.
You should look up the definition of a professional diver
@@StephenAlexanderVideos oh, why is that?
@@garlandgarrett6332 Anyone paid for their diving services is considered a professional.
@@StephenAlexanderVideos no, they are considered commercial, and they should be following subchapter T .What are your qualifications?
I truly can't tell if you're actually this dumb commercial diving is also professional diving either way if you're paid you're considered a professional literally google "What is a professional diver" it'll save you a lot of embarrassment in the future. Maybe you're too young to know that but you should have figured it out at least an hour ago when I told you to look it up but now you're just embarrassing yourself. It is entertaining for sure don't get me wrong life would be very boring without dumb people.
what camera mount are you using
GoPro Chesty