Yeah man of course! Im glad it was useful to you. In my newer videos im trying to get better viewing angles coupled with detailed guides. Its a work in progress.
Just found your channel. Dude you crack me the FUCK up with the shit you say and how you say it. Appreciate the link on that 🔥 track 2che. Building an EG hatch myself and my Ktuned harness similar to your hybrid one. Appreciate the install and info on harness connections. Ktuned’s instructions SUCK ass even online pdf version. SO.....
Man!! Thanks for the love and i try my best to keep it fun for sure. Yeah man their instructions are minimal but if you ever need to call them they are spot on. If youre stuck on something or cant figure it out dont be afraid to dm me on instagram ill help you throught it. The eg hatch has been one of the funnest projects ive done in a while!
I cant recall where I grounded it at but i did have an issue at first with the ground for the harness not making continuity. The shift cables are in a temporary spot as i have not re installed the a/c yet. Plans to rework this are in order. Upon completion ill have an upload going into more detail on the shifter cables.
At 22:00 in your video you mentioned a gray boy aka plug. Are you referring to the main relay or something different? Cause I’m having no ignition on kpro issue in the same chassis you are! Can you possible explain which plug your referring too? And what wire you grounded? This would help me out tremendously as I’ve built my car for 13 months and have can across this exact issue! Thanks 🙏
id assume if the main relay is where i was indicating that'd be so. i hadn't worked on this car in a while so its hard to recall. i do remember my first start didn't turn over initially and i needed to do something with the ground wires. check all your grounding points and make sure they are correct and in place. otherwise i did have that relay go out on me later down the road. hope this helps
How di you wire the fan switch like did you power the actual fans from the oem harness then iv heard you can use kpro for setting the temp for the fans to come on ?
@@tinfoilhat1619 me to man i had to read and re read to make certain but i couldn't figure out a way to convey that at the time when i recorded this. i didn't want to get people too confused with too much information and felt that there were parts of it that should require you to read the installation instructions provided by the manufacture given that maybe other people doing this had a different car/ swap combination. hope the video helped you in the slightest,
@@TKirkMedia it does help when I have all the info and prior research. I'm almost there, shit is giving me headaches. Also, my engine harness is all black, they're not colored. Although it is a ktune harness and very neat. I'm having to quad check which wire I'm biting into.
What’s up boss quick question did you ever get the ELD wire figured out to the green red brake fluid? I only ask because I have my ELD already wired elsewhere
its been some time since I've done the harness portion but if i recall correctly i just used a7 this may also be dependent on what car your doing this into. i think 8 is for integras im not really sure man
I hate how youtube automatically deletes/hides what it thinks are negative comments...there was a dude giving great feed back and youtube iced his comment. Dumb.
@@singletrack_king7700 yeah and in terms of reliability the k has taken a beating from me. Very happy with how its turning out. Cant wait till i have the car boosted.
the wiring is lacking on this car and is currently whats keeping the car stranded. :( the fuel pump relay is getting hot from the massive pump i installed so i have to fix the plug. As for the fan switch I'm pretty sure I just ran what ever factory was and spliced my spals in. i need to redo it will report back
@Jaysmaccin I updated the description with what I used in order to get my fanswitch installed. As far as the plug for the radiator fan i retained the factory plug and just clipped the pos/neg wires followed by soldering them to the wires associated with the fan switch. My fans are always on so I still need to further sort it out. Hope this helps.
ive been driving the car since last april and have yet to get an alignment. I plan to get one this month for the recent subframe stuff ive done. I havent had any issues otherwise and i think thats partially because i swapped the inners on the base rsx axles.
@@josephhawkins8387 yeah i will say that they vibrate a bit much but other than that they are a good temporary till your able to ball out on the hassports.
Thank You for taking the time to show and explain the process. This is EXTREMELY USEFUL on a 02-04 Harness, Eg Chassis Conversion Harness and KPRO.
Yeah man of course! Im glad it was useful to you. In my newer videos im trying to get better viewing angles coupled with detailed guides. Its a work in progress.
Your humor is killer, love it man
Sometimes you have to fight sticky situations with some humor. Appreciate it man!
editing magic, you start with a gutted car then BOOM full interior
really good video your so close to 1k subs!
almost there its a long road for sure
Killin it bro I'm about to be attempting this
you got this dude. belive it!!
I need an EF (CRX) guide, I can't find one.
bro i need another k swap project baaaaad.
@@TKirkMedia It's been a learning experience for sure. I'm almost ready to start, just need this wiring.ua-cam.com/video/jS4qwUfMPRw/v-deo.html
That select hat go hard
Previous employment opportunity I had was epic.
Just found your channel. Dude you crack me the FUCK up with the shit you say and how you say it. Appreciate the link on that 🔥 track 2che. Building an EG hatch myself and my Ktuned harness similar to your hybrid one. Appreciate the install and info on harness connections. Ktuned’s instructions SUCK ass even online pdf version. SO.....
Man!! Thanks for the love and i try my best to keep it fun for sure. Yeah man their instructions are minimal but if you ever need to call them they are spot on. If youre stuck on something or cant figure it out dont be afraid to dm me on instagram ill help you throught it. The eg hatch has been one of the funnest projects ive done in a while!
Can you go over what you used for the shifter box and how you routed the shifter cables? Good stuff bro Also what number 2 cable.did you ground?
I cant recall where I grounded it at but i did have an issue at first with the ground for the harness not making continuity. The shift cables are in a temporary spot as i have not re installed the a/c yet. Plans to rework this are in order. Upon completion ill have an upload going into more detail on the shifter cables.
At 22:00 in your video you mentioned a gray boy aka plug. Are you referring to the main relay or something different? Cause I’m having no ignition on kpro issue in the same chassis you are! Can you possible explain which plug your referring too? And what wire you grounded? This would help me out tremendously as I’ve built my car for 13 months and have can across this exact issue! Thanks 🙏
id assume if the main relay is where i was indicating that'd be so. i hadn't worked on this car in a while so its hard to recall. i do remember my first start didn't turn over initially and i needed to do something with the ground wires. check all your grounding points and make sure they are correct and in place. otherwise i did have that relay go out on me later down the road. hope this helps
Question about where you wired the charge light to ? Your not very specific on which wires go to what , I’m workin with hybrid racing harness for eg
www.scribd.com/document/9206665/Charge-Harness-Guide-v-1
How di you wire the fan switch like did you power the actual fans from the oem harness then iv heard you can use kpro for setting the temp for the fans to come on ?
Is that a copper pull up bar or does you plumber smoke
Meth ?
man im pretty sure the plumber
may have inhaled amphetamines...i have wondered why those are like that honestly.
T Kirk Media 🤣
@@BruceLee-xp5fc I think he may have done the subwoofer setup on the gc8 coupe as well. guy gets around.
Makes a video to help.
*video*
"You know, just follow the directions"
Lmfao
Hoes mad
@@TKirkMedia lol. I'm a lil slower. Watched it few more times and read the instructions about 4 times more. Pulled up some diagrams too. Hoes happy!
@@tinfoilhat1619 me to man i had to read and re read to make certain but i couldn't figure out a way to convey that at the time when i recorded this. i didn't want to get people too confused with too much information and felt that there were parts of it that should require you to read the installation instructions provided by the manufacture given that maybe other people doing this had a different car/ swap combination. hope the video helped you in the slightest,
@@TKirkMedia it does help when I have all the info and prior research. I'm almost there, shit is giving me headaches.
Also, my engine harness is all black, they're not colored. Although it is a ktune harness and very neat. I'm having to quad check which wire I'm biting into.
What’s up boss quick question did you ever get the ELD wire figured out to the green red brake fluid? I only ask because I have my ELD already wired elsewhere
Did you get the ELD wire figured out from the Green/red break fluid wire?
What did you connect the d series harness to?
Some of it just stays unplugged hidden.
So you just used a7, not a8 as well? The instructions are super unclear on their website
its been some time since I've done the harness portion but if i recall correctly i just used a7 this may also be dependent on what car your doing this into. i think 8 is for integras im not really sure man
I hate how youtube automatically deletes/hides what it thinks are negative comments...there was a dude giving great feed back and youtube iced his comment. Dumb.
Like your channel I usually can fix anything but I'm new to hondas lol
@@singletrack_king7700 nice!! they seem pretty easy to work on so far.
@@TKirkMedia Yeah from what I see very easy well at least compared to Subaru.
@@singletrack_king7700 yeah and in terms of reliability the k has taken a beating from me. Very happy with how its turning out. Cant wait till i have the car boosted.
Good shit broh..👍
Thanks man hope it helps someone even a little!!
Did u ground the fan switch?
the wiring is lacking on this car and is currently whats keeping the car stranded. :( the fuel pump relay is getting hot from the massive pump i installed so i have to fix the plug. As for the fan switch I'm pretty sure I just ran what ever factory was and spliced my spals in. i need to redo it will report back
Can I use this harness with the type s ecu or does it have to be kpro?
I used an type s ecu with kpro installed into the factory ecu. youll need both
@@TKirkMedia what I have is the engine harness. Hybrid conversion harness immobilizer bypass k20a2 ecu what else would I need ?
Cool vid but that Piccolo shirt is fire.
Thanks man! I tend to ruin my favorite shirts all the time.
Hey bro , I was wondering how you did your fan switch ? Does the fan plugs connect to the original plugs ? Thanks !
@Jaysmaccin I updated the description with what I used in order to get my fanswitch installed. As far as the plug for the radiator fan i retained the factory plug and just clipped the pos/neg wires followed by soldering them to the wires associated with the fan switch. My fans are always on so I still need to further sort it out. Hope this helps.
Does hywire harness fit on k24
This harness does NOT work with any 05-06 OR K24 engine wiring harnesses. - from the hybrid racing website.
@Mr. K Thanks for the intel!! Makes sense that it would.
Hey bro how is the axle angle with those "gas port" amazon mounts?
ive been driving the car since last april and have yet to get an alignment. I plan to get one this month for the recent subframe stuff ive done. I havent had any issues otherwise and i think thats partially because i swapped the inners on the base rsx axles.
Thanks for the feedback bro I'm about to order these now. Much appreciated
@@josephhawkins8387 yeah i will say that they vibrate a bit much but other than that they are a good temporary till your able to ball out on the hassports.