How to Replace Rear Upper Control Arm 02-06 Nissan Altima
Вставка
- Опубліковано 7 вер 2024
- For More Info visit us at: 1aau.to/h/a9T/
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged rear upper control arms. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
This process should be similar on the following vehicles:
2002 Nissan Altima
2003 Nissan Altima
2004 Nissan Altima
2005 Nissan Altima
2006 Nissan Altima
🔧 List of tools used:
• 17mm Wrench 1aau.to/oCN/1AX...
• 19mm Wrench 1aau.to/oCN/1AX...
• 21mm wrench
• 17mm Socket 1aau.to/oaCy/1A...
• 19mm Socket 1aau.to/oN4/1AX...
• 21mm Socket 1aau.to/oN4/1AX...
• Needle nose pliers 1aau.to/osf/1AX...
• Needle nose pliers 1aau.to/osf/1AX...
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/omt/1AX...
• Ratchet 1aau.to/oaMV/1A...
• Socket Extensions 1aau.to/oaCy/1A...
• Torque Wrench 1aau.to/o49/1AX...
• Rust Penetrant
• Center Punch 1aau.to/ohK/1AX...
• Floor Jack 1aau.to/oFK/1AX...
• Jack Stands 1aau.to/oDr/1AX...
• Pick 1aau.to/oww/1AX...
Subscribe: / @1aauto
Check out our playlist:
Nissan Altima 2002-2006 3rd gen: • Nissan Altima 2002-200...
For More Info visit us at 1aau.to/h/a9T/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Best videos
I wish they had more replacement videos for newer cars. I have a 2016 Altima and there aren't many videos
What about the other side??? There is no gap like between the gas tank and frame on that side?
my nissan maxima 2004 its more complicate or the same
My new control arm doesn't have the cone thing on the ball joint.do you have to transfer it or something?
Any solution with the taper cone? My rear control arm does not have the cone either
@@zbamor8543 i cut mine off bolt head rusted out
I think the solution was to buy the control arm with the cone!
I think before I start it would be easier if the shock was out to give more room.
Dang! The rear is much more complicated to replace than the front and how much more if you don’t have hydraulic lift.