TIG Welding 6G Pipe Root Pass
Вставка
- Опубліковано 26 сер 2024
- When we talk about 6G pipe welding, we are talking about welding two pieces of pipe (of any size or material) together in a fixed 45 degree angle. Being able to weld in the 6G position will qualify you to weld in any other position. It will not, however qualify you to weld any material in that position. In this video, we are going to show you how to weld 6 inch Carbon Steel Pipe in the 6G position to help you pass a test or get a job.
Are you a passionate welder looking to take your craft to the next level? Look no further than the WELD™ app - the ultimate welding community! With the WELD™ app, available on both Google and Apple stores or through logging in at www.weld.com, you'll gain access to exclusive videos and resources to enhance your welding knowledge and skills.
The WELD™ app is more than just a resource hub - it's a community of passionate welders just like you. Connect with fellow welders and experienced advisors, get your questions answered, and find inspiration to keep pushing yourself forward.
The app also provides a range of educational resources, including tutorials, tips, and how-to videos, to help you improve your welding skills and knowledge. And with the convenience of being able to access all this content right from your mobile device, you can learn and improve your skills anywhere, anytime.
Join us for insightful podcasts and follow us on social media to stay in the loop on the latest trends and techniques in the welding world. Don't miss out on the incredible benefits of being a premium subscriber to the WELD™ app - join us today and take your welding game to the next level!
linktr.ee/Weld...
Disclaimer:
Weld.com is an affiliate and industry influencer that earns from qualifying purchases through our posted and affiliate links. Our videos are provided for informational purposes only and while we strive for accuracy and reliability, we cannot guarantee it. As tools, products, and techniques are constantly evolving, we cannot assume responsibility for any errors or omissions in our content. By accessing our content, you agree to review and comply with our and any third-party terms and policies.
Always exercise caution when using any tools, equipment, techniques, or processes shown in this content. If you are unsure, seek advice from a licensed professional. Any reliance on the information presented is entirely at your own risk. By watching this content, you expressly and voluntarily assume all risks, including but not limited to death, disability, and/or serious physical injury related to the use of any tools, equipment, techniques, or processes. In the event of an injury, seek medical attention immediately.
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors, or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
My instructors keep telling me that I need more build up on the inside of the pipe for my root pass. But none of them can actually show me how to do it themselves.
I'm older than both these guys...these guys really are old-school great people who give their time and wisdom and make this planet a better place. Some day I'll get enough balls to WALK THE CUP
The test is the easy part when u get in the pipe rack with a safty harness on is when It becomes harder
Oh man, this reminds me for my 6g exam! 45° 60mm pipe 3mm thickness and the top highness of thah pipe was same level as my eyes. You can't use wall to lean on or some other support. There are just that pipe, your shaking hands and three people watching your agony :) But I did it.... almost perfect.
Love your videos, because no matter what experience I have, every time I learn something new and interesting.... which makes me better TIGer ;)
Glad to be of assistance!
This is a personal preference. I personally feel more comfortable looking through the inside of the pipe at a slight angle so I can see the wire and the inside of the weld pool on bottom. I have also looked at it from the outside while on bottom as well but it seems to take a longer to complete the weld.
That is correct. Move up on the bevel and lengthen the arc to decrease amperage and snap out of it. Since you are using a manual torch you may post shield with argon.
Very nice technique. I love the way you explain about the root welding process. Really I love watching the video very much.
A student from India...
Awsome Tricks and Teaching
I love it
I am very confident. I have been working in the field of welding since 1992 and have worked in oil refineries and bridges stores, noting that I am a welder with electric tubes and tig
We get anything from generic to ESAB / Lincoln filler wires. What’s important is the GRADE for filler wire. We mostly use ER70S-6 for our carbon steel pipe welding with GTAW.
Weld.com do have any video's on welding p91 chrome
I thought that as well.Never seen it, much less tried it. The 6GR seems to lend itself to a small mirror. I tried the mirror and it looked like I was a novice. Practice, practice, practice they say. Good luck and best wishes.
Thanks for sharing, looking what other welders do helps me hopefully improves my welding techniques .
The angle of that pipe is still considered to 6g position?
Lead angle on any open root pass regardless of position may vary. 0-15 is usually for structural fillet joints. I have not had much luck with a 0 - 15 degree angle getting the open root pass to progress (flow) upward. Try using the 25 - 45 lead angle and keep the wire on the leading edge of the pool for complete fusion and reinforcement.
Gonna try this method tomorrow. Practicing 6g this week for my test-plate which is coming up soon.
He actually did weld the right side. unfortunately we were pressed for time and were unable to capture a good arc shot. we can post what we did get if you would like to see.
This is a blessing to me thanks guys I have all structural experience but I'm confident I can do this
“Mr. Tig” had to go get Bob Moffat to do some real tig welding.
There is no need to purge carbon steel pipe or plate. Simply clean the material about ¾ to 1 inch away from the root on both sides.
This answer requires more characters than allowed by UA-cam. I created a new thread on the forum specifically for this question. The link can be found at the bottom of the description.
Thanks.
Thank you for posting this video. Very detailed on positioning. I myself have the 26FV miller tig torch and trying to get the hang of this large torch.
DEPENDING ON HOW HIGH OF AMPS YOUR USING,TRY LOOKING INTO A CK TIG TORCH.CK WORLDWIDE.COM
that is wonderful sir one has to dip in the filler wire in write in the groove for sufficient penetration and also mind your preparation and and settings depending on the thickness of the filler wire and the thickness of the pipe.
I sure would like to thank you for the informative video. I've been a welder for over 20 years and I can't seem to pass the 6G carbon test. I'm AWS 6G certified, (I paid for that waste of money) but when I go to take the test my root is ok but my hot pass and stick cover suck! I have my own 200 amp tig rig, I'm now going to get a DC power source that has finite controls. Practice, practice, practice. I know I can do it and I'm sure by watching a few more of your videos. Thanks again, keep it up!
Did you ever pass it?
@@snowkracker Yeah, just did some hood time and it was easy.
BOB is the REAL “Mr. TIG”. Bob is a real bad ass old timer. Everything he says makes sense and has wisdom, no bullshit. He actually HELPS for cert. prep and practice. This other white haired pretender is a baby sitter. He is an insult to most people’s intelligence. A bullshitter. Its almost like there’s a bunch of five-year-olds watching and he tries to interpret actual welding stuff; or for people who have no capacity for welding, people who never actually going to get in the industry or have zero intention of actually getting a welding CERT. (he talks like he’s teaching ABC’s to people that can’t speak yet.). Other people must feel the same; never see that white haired baby feeder anymore. The new weld.com videos are bad ass! Thanks Bob!
I believe he is very good welding teacher.
And handy man i wish for him good futur regards
I weld the bottom of 6g with the rod on the out side of my pipe.Have had problems with gap closing shut. Also i put four one inch tacks on bottom top and sides.
8:34 "you like that??"
Calm down there Kirk Cousins😂
Also structural steel tubing Bob.
Great video, I'll start practicing that position tomorrow after work. Thanks!
I Love Welding..
I work Welding in Malaysia..
A legend is (was) born.
Thanks a lot mr. Tig especially mr. Bob. this video teach me more about root. i bet u use 60-70 ampere
Hi he is very good welding supervisor. I which him I believe he is professional 😉
Very informative. Excellent craft skills.
Funny how the guy used to call himself "mr tig", yet could only weld flat on a bench 😄😄
I think mr tig and bob moffet booth know their stuff this is a instructional video and they have a time frame to show everyone how a 6g weld is done like bob said there are three ways to weld a 6g pipe they cant be perfect all the time some times you make mistakes
i want to see bob moffatt do a 6g video using stick
Bob is definitely a first class did u see that 1 /16 rod technique master old school burning he started from 6 went to 12oclock perfectly
the tig and mig pipe welding were awesome the mig helped out a lotou guys I coudnt figure out how to get the root never thought a 5/32 gap if you guys could do one for stick welding pipe I cant perfect the root pass
I like the technique of feeding the wire through the inside of the pipe... Very cool. Will be interesting to see it when restricted.
Thanks for another great video. Keep em comin
what amperage/voltage range use for the root and you move the rod side to side o no
this video sure helps, thank you
Muy buena soldadura y muy buen video, saludos a los colegas desde Uruguay
You know, I have probably watched this most excllent video 5 times. Matter of fact, I think it's the first Bob Moffet video I ever watched. I am just now noticing the Boomer Sooner weld cap. Need to find me a Longhorn welding cap - Hook'Em!!!
Very good Welding..
I like this Welding..
Currently in welding school having a lot of trouble with this one theirs time my teacher has me redoing it
Vén fasz jó hogy tudja egy Fiatalabb Emberre lennék kíváncsi én 17 éves vagyok a HL45 már megyeget!! Gyakorlati cégem ahová járok! Azt mondták maradjak itt mert AWI-val nagyon ügyes vagyok már most!💪🖖
Enjoyed the vid. Tig weld up the left, left handed and up the right, right handed as normal. But! I’d never walk the cup on a root, it’s a good demo but I’d never teach it. I’m used to putting roots in that look like a ‘wedding ring’. Walking the cup n dipping the wire, it looks a bit flat or sometimes under. Btw your gap is huge! Takes longer to weld plus more material, I find it bizarre you feel the need to feed the wire through the butt on a easy accessible butt like that. Anyway every welder is different, happy welding
I wouldn't say I sweat bullets but I am still in collage learning this weld now im more nervous about my lack of skill than the weld type
thats great bro but thats good if your doing that then your feeding the wire from the top inside of the pipe. if you can do that you can weld almost anything and any size
"Oh yeah" 6:30
LADIES....you're welcome.
8:34 "you like that??"
@@graffiti0saves lol
That was a great video, thanks for sharing. That guy kicks butt!
requested information in order to adjust the machine to the material to be welded agree amps, voltage, and choose gas welding material handling also can fit the torch movements welding position.
Thank you.
Buen tutorial, gracias desde Perú.
Great job guys, keep welding
Good camera work.
Root looks great!
I love welding
please put sbtitulos in Castilian! Greetings from Argentina ha ha great quality videos and very good perception about the process tig!
I "think" I saw at least two flaws on the inside.... near the end of the video when you were looking inside with the flashlight.
Grandpa Bill
Why is it when I'm doing the root it doesn't seem to flow right? Like it seems like the puddle comes to a standstill and the keyhole just gets bigger and bigger, then I have to dip the hell out of the rod over and over and then of course my tungsten ends up getting stuck
A lot of places still blind both ends of the pipe off. I guess it just depends on how critical the job is that they are hiring you for.
In a perfect world, 100% penetration welded from both side is accessible only if the pipe is that large and you have that much room to weld the inside. An EB ring or metal backing would do just fine for a 6G. Welded from one side, you have to worry about suck back or concavity.
Joy Grady-Hilton you cant put a backing ring in ASME IV bahahah. your nuts. its nuclear, petrochemcial code. 100 percent x ray. severe cycle... chemicals like chlorine running through it. pipes operating at 1000F plus.. and 400PSI...
Just because the ASME code doesn't allow it, doesn't mean the other codes don't. There is more than one welding code lascoob. I've dealt with catapult accumulators with a lousy cap pass that cracked down the middle. 1000F is nothing to launching a jet off a carrier. We fixed 14 8" SS joints with a backing ring. Worked just fine.
I have also worked on fuel gas lines for jet engines. Inconel 25-35
Falls under asme IV or the companion military code.
No backing ring. And a backing ring will disrupt flow and cause stress on the toes of pipe.
You can have a backing ring without disrupting the flow IF it is manufactured with interior bevels. Surface Ship's have a specific requirement for that to use in different fuel flow systems. I've worked with Titanium 10S on sea chest and condensers..different scenario where we welded open butt with a purge.
Thank you very much for the upload Welding video very helpful to me thank you sir
Walkin that cup! Very nice good job with editing also!
Thanks for the tips.
What amperage do you root for?
Did u guys see the restricted test known as 6gR. Hes definitely a master welder
Every rod mfgr has their own handbook on all their rods with a description of the rod(s) and how it's used. All your welding supply stores will have these available ... many will give them out for free or for a low price.
Grandpa Bill
este señor a la edad que tiene sigue siendo una persona muy respetable ,por como desarrola su trabajo ,se nota la experiencia en el .
hi guys i have a test 6G position on 6 inch pipe, and my comment on this video is : the root run must be 2mm from in side of the pipe but on this video it's flat, so it's no't the proper way to do so if you have a 6G test. thanks yooo
Nice and smooth
Nicaragua saludos oye ya buena la clase
Did the hardest pass for a righty first. Real welder ladies and gentlemen.
MEGUSTARIA TRABAJAR EN LA PARTE DE TUBERIA PARA TENER MAS CONOCIMIENTO PERO EN EL EXTERIOR
Awesome video
Hi mr.tig just want to ask if you can post a video on how to repair a tig root pass. Ex. Lack of fusion and undercut
Just outta curiousity... do u have any tips or tricks on window welds or say 6g tangent welds?
Are you contaminating tungsten , by the way the flame changed colors
Please upload a video of how should do i best root quality and 2mm root in inside
Akash Bakshi feo
Also have been welding pipe for 32 years.
The way you have the pipe setup, although in the correct position, as regards 6G, you wont find in practice, many test facilities in which you are able to clamp on top, all have anchor point bottom, ask any UA welder.
yes you are right.
northern soul UA has welders? humm thought they were all cry babies... on the job we took over they were as they loaded up their tool boxes any way.
Robert Mayo haha union gets run out all the time
la scoob that’s funny my steamfitters union takes all none union jobs... we run them out
Why is is cup so small i have been using a 8 cup with 3/32 tungsten
Can you make a clip How to weld Alloy pipe diameter about 20 inch and schedule 160 with the right procedure heating up before welding.
I do not like the method of place the rode through the pipe. I like to make my gap about a 1/16" less then the rod and when welding I just pause in the middle to ensure the reinforcement is weld is about an 1/8"
Excellent video thanks!
great video!
OK I have a question. If I am using a scratch start Tig set up, how do I terminate a Weld? Crawl up on the bevel and snap out with giving the bead a post shield of argon?
Thanks
Am doing the 6g in somedays but i never learned to "walk the cup" would like a video about that
new friend here sending full support
hello and thanks for the video. firstof all sorry for my bad english. i try to explain my problem. this technic is working when the pipes are fit but what if there is some fitting problem i have a pipe flange is 2 milimeter narrow then pipe. but still i ned to weld it for xray how i can do this??
Great job
Hi sir what's the advisable tacking. bridge tack or pretack for root? Sorry ro bother you im going to take gtaw im smawer
During the welding,how much gap required between the pipe and fitting???
Good job..
This is great stuff what school dont teach the video covers
Is it a custom to weld the bottom end or 6-o-clock by looking at it from the top. or do you move your head to look at it from the bottom?
even when you are testing! why work hard when ya can work smart! lay wire in from the backside when ya can do it, that too me is just smart money . ensure's a good root pass! i'd hate too do a joint and then go backwards to the root with a grinder cuz i flubbed a root!
When you are use to pushing the rod in, you know what the other side is gonna look like and it keeps you in practice. Heat on outside = weld on out site, heat on inside = weld on inside
Billy Tabor filler rod on back side of bevel = good bead and full penetration . filler rod infront of bevel or fed flat on bevel = shop welder.... bah
Oklahoma.. Now I really like Bob😁