How to Replace Front Right Outer Tie Rod to Steering Arm 1999-2004 Jeep Grand Cherokee

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install new TRQ outer tie rods on your 1999-2004 Jeep Grand Cherokee. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
This process should be similar on the following vehicles:
1999 Jeep Grand Cherokee
2000 Jeep Grand Cherokee
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee
Tools you will need:
• Pry Bar 1aau.to/o2b/1AX...
• 14mm Wrench 1aau.to/o4C/1AX...
• 14mm Socket 1aau.to/obLk/1A...
• 15mm Socket 1aau.to/obLk/1A...
• 19mm Socket 1aau.to/oasm/1A...
• Adjustable Wrench
• Metal Cutters
• Pipe Wrench
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ov8/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obPV/1A...
• Torque Wrench 1aau.to/oaTD/1A...
• Anti-Seize Grease
• Cotter Pin
• Gloves 1aau.to/oayn/1A...
• Safety Glasses
• Floor Jack 1aau.to/oahv/1A...
• Hammer
• Jack Stands 1aau.to/o5U/1AX...
• Measuring Tape
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.