How to terminate KNX Cables into an electrical panel
Вставка
- Опубліковано 1 лип 2024
- In today's episode "How to terminate KNX Cables into an electrical panel"
In today's episode i will share with you a way of terminating KNX Cables inside an electrical panel.
Wago Mounting Carrier (6 mounting slots) Official WebSite : www.wago.com/global/installat...
Wago Micro Push Wire Connector (Red) Official Web Site : www.wago.com/global/installat...
Wago Micro Push Wire Connector (Black) Official Web Site : www.wago.com/global/installat...
Wago Micro Push Wire Connector (Yellow) Official Web Site : www.wago.com/global/installat...
Wago Micro Push Wire Connector (Light Gray) Official Web Site : www.wago.com/global/installat...
Legrand Cable Markers Official WebSite : www.legrand.com/ecatalogue/03...
Heat Shrink Tubes on Amazon (Affiliate Link) : amzn.to/2WammWk
How to make a cheap Cable Finder - DIY Tutorial : • How to make a cheap Ca...
Tools :
Facom Cable Stripper : sg.rs-online.com/web/p/cable-...
Knipex Electronics Super Knips Comfort Grip on Amazon (Affiliate Link) : amzn.to/3ghM42k
Knipex Cable Stripper on Amazon (Affiliate Link) : amzn.to/3ghXvqD
Dremel VersaTip 2000 on Amazon (Affiliate Link) : amzn.to/3kfIoz9
Join Poseidwn Tech UA-cam channel :
/ @poseidwntech
Please have in mind that in order to work on a KNX project you need to be certified.
You can find Certified KNX Training Centres in the link below.
www.knx.org/knx-en/for-profes...
Poseidwn Tech on Social Media:
www.poseidwn.tech
/ poseidwn_tech
/ poseidwn.tech
/ poseidwn.tech
/ poseidwntech
KNX Tutorials Playlist : • KNX Tutorials
KNX Web Page : www.knx.org/knx-en/index.php
ETS Software : www.knx.org/knx-en/software/e...
KNX Training : my.knx.org/
KNX Basic Course Documentation : amzn.to/2pASDCM
KNX Advanced Course Documentation : amzn.to/2I1mw68 - Наука та технологія
Great stuff!
Spectacular video tutorial, preciate👏🏽👏🏽👏🏽
Thank you!
Great content!! I really enjoy your videos about KNX, it's a very powerful system and it should be spread more. It would be very interesting to see a video showing a real system, to understand how and where all the components are mounted.
It is in our plans to make such a video. Thank you for your comment!
Thanks, I didn't know those 8-way DIN connectors existed. I'm asking my supplier for them now :)
You are welcome! Thank you for your comment!
Personally I rather use "phoenix PTFIX 6/6X2,5". Since they have the option to easily take out a wire. They are also din mountable and in different colours available.
But thanks for your great video! ;)
Thank you for sharing that and for your comment! I will give it a try!
شكرا ❤
You are welcome!
Phoenix Contact make KNX-specific terminal blocks that can be bridged.
Nice work!
But I have a question!
How do you connect white and yellow wires? You conected only red and black...
Thanks! In Wago connector, I terminated both the red-black and yellow-white wires, although I didn't actually need them in this installation. The reason I do that in every installation is to be prepared. For example, when I have a KNX device that requires additional auxiliary power through the yellow-white wires, I'm already set.
1:30 , if i wanted, i can connect the cables directly to the actuators, right ?
Great video , where did you find those wago products ?
Thank you for your comment! In Greece we buy Wago products from Dimoulas : www.dimoulas.eu/klemmes-bysmata/caps/mounting-carrier-for-6-connectors-243-series-for-din-35-rail-mounting-screw-mounting-orange/
Where can you download a map of wiring and how to wire a building with different equipment
What do you mean a map of wiring? Normally before installing the KNX devices there is a KNX study that must be followed.
Cable cores should never ever come in contact with the 230V wires. > = 4mm clearance space. Also do not remove more sheath from the cable then needed. This would not pas an inspection.
Thank you for your feedback. If you have any additional info or best practises please share them.
anyone can sent me the basic Instalation of KNX
because my vendor Disepier
Μήπως δε θα έπρεπε να κόψεις τα συρματάκια γείωσης των πράσινων καλωδίων αλλά να τα γειώσεις σε μια μπάρα;
KNX Wires are not to be „earthed“ at either side.