Hey mate, I also have a JZS171w, Completely random, I just installed a Kenwood double din headunit. I see you have the timber surround. I still have the flip down 'CROWN' cover which is chunky and covers the top of the screen. I was wondering if you custom made that panel? Or is it a rare Yahoo Japan purchase? I'd would love to get my hands on one. Cheers, Antony.
I’m going to look at one in the w.e. I was wondering what it’ll cost to get the r154 installed. Do you have any idea or anyone else in the comments? Love these JZS171s
Just wondering with your emv conversion if you found a aux/vtr input for the non emv body? Mine doesn’t have the box in the boot for the blue plug input or the plug under the console to do noobs conversion the one on here. Cheers
Simply cut the lever off, offset it to the rear/right inline with the centre of the auto opening then weld in an extension. There's measurements in my toymods thread
@@TheWirelesstj Chop off the shift lever about halfway down, weld in another piece of metal to put the top half in the right spot. I think it was basically 45 degrees to the rear right about 50mm in length. have to get the angle right so it doesn't foul on anything.
Alright !! Been looking around for this kind of stuff . I'm planning on getting a jzs171w ( crown estate ) and would like to plan for a manual swap . Already checked the link to the forum and bookmarkd :D . Cool video btw bruh
Hey mate, I also have a JZS171w,
Completely random, I just installed a Kenwood double din headunit. I see you have the timber surround. I still have the flip down 'CROWN' cover which is chunky and covers the top of the screen.
I was wondering if you custom made that panel? Or is it a rare Yahoo Japan purchase?
I'd would love to get my hands on one.
Cheers, Antony.
Yahoo Japan purchase, it's the fascia that comes with the beatsonic kit. I think the part number ends in wb3
MVX-43BWD3
I’m going to look at one in the w.e. I was wondering what it’ll cost to get the r154 installed. Do you have any idea or anyone else in the comments? Love these JZS171s
Добрый день , консоль под механическую коробку сами изготавливали?
Just wondering with your emv conversion if you found a aux/vtr input for the non emv body? Mine doesn’t have the box in the boot for the blue plug input or the plug under the console to do noobs conversion the one on here. Cheers
Are the holes for the clutch master cylinder already precut?
No, but the boss is there in the firewall.
Would you be able to tell me what handbrake you have used?
JZX100 👍
@@bencooney5263 .is the transmission also from JZX100?
Hey mate, please tell me how you fit the shift in the standard place
Simply cut the lever off, offset it to the rear/right inline with the centre of the auto opening then weld in an extension. There's measurements in my toymods thread
Armstrong Village
Hey mate, was the swap very hard to do? Buying a crown soon and am wanting to do this swap either with an R154 or TR6060, cheers!
www.toymods.org.au/forums/threads/88532-R154-2JZ-GTE-VVTi-JZS171-Crown-Estate
Коробку сам ставил?
Hi Ben, may I know how do you deal with the speed signal wiring?
#all4swap ATEMU
@@bencooney5263 is that from serialnine ?
@@gazzazautovlogs4915 it's from all4swap a Russian company
На этих моделях в стоке только автоматы, переделка 154 с чайзера поставлена однако
what driveshaft ? the one from the auto box ?
Auto shaft +50mm
MK3 Supra shift knob?
Yeah, they were still available new at the time. I think it worked well.
are you using the cube short shifter?
Nope, This is a stock JZX110 shift housing and lever on a JZX100 R154. Offset to line up with the hole in the trim.
How is the offset done? I would also like to do this with my jzs171
@@TheWirelesstj Chop off the shift lever about halfway down, weld in another piece of metal to put the top half in the right spot. I think it was basically 45 degrees to the rear right about 50mm in length. have to get the angle right so it doesn't foul on anything.
@@bencooney5263 So have you used a full JZX110 R154? I'm also looking at doing a similar thing in the somewhat near future when I get my estate in
@@antonphillipson2388 www.toymods.org.au/forums/threads/88532-R154-2JZ-GTE-VVTi-JZS171-Crown-Estate
the 1 and 5 should be the other way around, dito for 2 and 4. but its still a very , very nice job bro. enjoy
Alright !! Been looking around for this kind of stuff . I'm planning on getting a jzs171w ( crown estate ) and would like to plan for a manual swap . Already checked the link to the forum and bookmarkd :D . Cool video btw bruh
Try not to money shift