Immersion Mining at home with 8 Antminers S19J PRO's - sound of silence!
Вставка
- Опубліковано 7 вер 2024
- This is how loud Immersion Mining is. One of DCX Immersion Enclosures with 7x S19pro 110Th/s, 1x S19 95TH/s - approx 30kW in 1 sq meter. Heat rejection via ICP40 dry cooler. Elevation difference +2 meters - the enclosure in the basement and the dry cooler on the ground level.
Get your quote at: cryptocooling.eu/
#immersion #immersionmining #immersioncooling #cryptocurrency #bitcoin #crypto #blockchain #btc #eth #bitcoinmining #bitcoins #bitcoinnews #cryptonews #blockchain #cryptocurrencies #ethereum #immersion #liquidcooling #immersioncooling #investment #investing
So good
Sound of money... :)
hi, looking good. How much electricity does it save ?
Could you film the wall next time and without sound?
What kind of hashrate are you getting from this system? Does it stay at 110? Or does it increase?
Have ypu done a setup with graphic cards
When overclocking time? :D
What are you using for an air cooler? How far is it from the tank?
water Isn't?
If 51 is the dielectric coolant temperature, what is the 28,7 temperature shown below?
I am guessing that they show the hot and cool sides of the cooler. Hot would be at the top of the tank and the cool would be the output of the radiator back into the bottom of the tank.
I ordered one 8 weeks ago, can i get an update? No one is answering my requests. thanks
Is it possible to put miner in diffrent configuration to box?
Hello can i use this oil?
dimethyl silicone oil 201 high temperature resistant mechanical lubricant agent maintenance oil demoulding silicone oil bath
Is there any telegram group so that we can ask questions
Have you ever tried overclocking them to get a higher hashrate?
Water and electricity? How does that work?
It’s not water.
that is, oil is non-conductive, at least for some time ...
How much is the estimated cost for this? Do you have facebook page?
They replied to me and average price before shipping is about $1000 per slot per miner. This was for the full set everything included. After shipping and customs probably closer to $1500 per machine. It's very expensive
How did you deal with the fans in the miners?
Will be taken off. The best system :)
DCX have a UA-cam channel with a video called immersion mining manual. Check that out.
did you remove thermal paste before immersion for the s19j pro?
+1, let me know if you find out
I didn't
Where do they put the thermal paste?
I thought it's all soldered heatsinks...
@@Arek_R. Heatsink are screwed, under there is a LOT of thermal paste (S19J pro)
@@IamHamdan I decided to remove the thermal paste, not so difficult
can a regular house on the grid pull 8 x 3250W or 26kW ?
In the US you would need upgraded electrical panel to pull that much safely. Even though most homes are starting to have a 200 amp breaker, you have to turn gear off to do anything due to power constraints. You have to power the cooling system too.
The calculation for S19 pro -
3500W ÷ 230V in the uk = size breaker which is 15Amps, so you would use a 20amp breaker this will vary depending if single phase or 3phase or where you live in the world.
Use 6mm cooker cable close to DB and run each unit on a 30 amp to protect asic ideally run a seperate DB split the tails seperate the power from your house supply.
Do you keep the fans running ? Or remove fans?
Yes. Im in Canada and working with an electrician right now. I have an older house built in the 50s with a 100amp service to the panel in my house. We're upgrading that to a 200 amp service with a new panel that has enough room for the 8 circuits.
Can this immersion system be used inside a home? Possibly in the basement? Is there any health risks or issues?
We are the Borg. Your Bitcoins will be assimilated. Do not resist. Resistance is futile.
Hello,
I received my order. As I mentioned before I do my order. You saler confirmed that system is run for goldshell CK5 miners. But in your other video in the comment you said that we have to remove thermal paste... All the components of goldshell miner are using thermal paste. So are you sure at 100% this is work with goldshell CK5 miner? I just need to clean and replace fan with fans emulator? I don't want to break my miner. If I have to remove the thermal paste this system is not good for my setup.
As your saler told me it is a plug and play system so please I hope I don't need to remove thermal paste of all heatsink... I am not able to do it and so this enclosure is not working for my setup.
Can you add the liste of all miner that is working with it without anymore preparation than cleaning and fan remove please.
I don't want to run it but not before you garenty that is 100% working without any complicated operation (thermal paste remove from all components...).
Thank you.
bro I feel sorry for your issues but i think thermal paste is a no no in liquid cooling in general.
bro just remove the paste and get them in the tub to make some mucho dinero
Trying to solve my ck5 heat issues as well! How to remove thermal paste on ck5?
@@chiahung1988 Wipe it off with Isopropyl Alcohol wipes. Can use napkins or cotton swabs.
@@chiahung1988 Are you solved your problem? interested in knowing how you did it.
Hi. Please can you tell 1 trusted miner seller? If you want please tell me vie PM. Thanks
Yes I know of a trusted dealer you can purchase from where are you located?
hi, sir,we are from China,we sell gpucards and antminers. they are cheap than other seller ,are you interested in them?
فارسی زبان کسی هست
Are you interested in purchasing one?
Your website is not even encrypted? What the hell is that dude