Super product. My advice is take it out of the box and dry fit it to your dashboard, ensuring it penetrates all the crevices it's supposed to do before you apply the adhesive. My installation met with an emergency when the Dashskin didn't sit properly on the left of the steering wheel. The dash plate, below the steering wheel, that spans from the emergency brake release to the cigarette lighter was too tight to admit the Dashskin into the gap, resulting in it not seating. Fortunately, the 7mm socket for the screws on the top of the dash fit the screws holding this, and as I loosened them, I was able to snug the Dashskin down to where it belonged and finish the job. Great product, easy install.
I wish someone would start making the bezel. Everyone with a late model needs one. I have 3 that I need. Great video. Edit: I will use a step drill bit for the interior light switches so I can replace them if needed.
Thank you for this video, your videos are laid out great. I need this part for my truck. I noticed it looked like you replaced your wiper cowl cover with one without grates for airflow. Do you recommend this style? I am in need of a cowl replacement as well.
@@UnnamedHandyman thanks for watching and appreciate the support! I replaced the cowl to a smooth one back in 1999-2000 because it was the sport truck look of the 90’s. I’m not sure if there’s a company that still makes one.
What a great product! So easy to install and no I can really enjoy my truck! No more cracked dash on my OBS chevy! #dashskin
Super product. My advice is take it out of the box and dry fit it to your dashboard, ensuring it penetrates all the crevices it's supposed to do before you apply the adhesive. My installation met with an emergency when the Dashskin didn't sit properly on the left of the steering wheel. The dash plate, below the steering wheel, that spans from the emergency brake release to the cigarette lighter was too tight to admit the Dashskin into the gap, resulting in it not seating. Fortunately, the 7mm socket for the screws on the top of the dash fit the screws holding this, and as I loosened them, I was able to snug the Dashskin down to where it belonged and finish the job. Great product, easy install.
@@smiddywesson2703 thanks for watching and for the pro tips too!😎👍🏽
It's been a week, and my eyes are still drawn to the magnificence of the new dash. MESMERIZING
@@smiddywesson2703 Haha! that's awesome! I love mine too!
I wish someone would start making the bezel. Everyone with a late model needs one. I have 3 that I need. Great video.
Edit: I will use a step drill bit for the interior light switches so I can replace them if needed.
I agree! Thanks for the tip as well!
They do make them!!
@@westinvines9763 Where? Thanks
I didn't know they made these awesome
Thank you for this video, your videos are laid out great. I need this part for my truck. I noticed it looked like you replaced your wiper cowl cover with one without grates for airflow. Do you recommend this style? I am in need of a cowl replacement as well.
@@UnnamedHandyman thanks for watching and appreciate the support! I replaced the cowl to a smooth one back in 1999-2000 because it was the sport truck look of the 90’s. I’m not sure if there’s a company that still makes one.
@@MisterMemoThank you for your help!
What size drill it did you use? Great install video very thorough
Thank for watching. Don't remeber the drill bit size, I just matched it up to the screw size. You can always start out with a small pilot hole first.
Awesome!🔥
Thanks bro! Great product! Love the way my dash looks now! 👌🏼
What the link to the door switches that should be replaced before the skin?
I believe it's this one: amzn.to/3I0Vo88
Dónde lo compraste amigo?
Aquí bit.ly/DashSkin quedo chingon
I don’t see the need to complete remove the bezel
Great piece! Do You have the sell link?
bit.ly/97-98Dashskin
Nice
Thanks Kordel!
@@MisterMemo 🤝
Awesome! Noticed you lost a little skin on your finger, hazards of being a DIY guy
Haha Right! Thanks for watching and supporting!
My dash always making noise and it's not stable so do you recommend it?
Pin point the noise. Check all the mounting bolts and or anything anything that has bolts.
Looks like it would work great.
Anyone seeing issues?Yet
Maybe some fiberglass mesh on the cracks 🤔
Love my Dashkin and has been great.
@@vm722 I use glue and then medal tape.
How is it a few weeks later?
Still holding strong!😎👍🏼
Disculpe en donde la puedo conseguir la parte
bit.ly/DashSkinWebsite 😎👍🏽
Cual tienda lo tiene
el link de la tienda esta en la descripcion
👍
Great product and easy install!
@@MisterMemo hace You the link sell?
@@gersoncanul5070 SOrry had to fix the link. Here you go! bit.ly/97-98Dashskin
Did the screws go in fine on top of the
It did. 👍🏽