Galaxy Note20 Ultra 5G screen FPC connector replacement
Вставка
- Опубліковано 13 сер 2023
- Ebay store: www.ebay.co.uk/usr/sorinelect...
WebSite: sorinelectronics.com/
Patreon support: / electronicsrepairschool
UA-cam Members: / @electronicsrepairschool
Forum: forum.sorinelectronics.com/
Discord: www.sorinelectronics.com/discord
My tools: www.amazon.co.uk/shop/electro...
PayPal me: www.paypal.com/paypalme/Elect...
Nice job Sorin, well done.
Excellent job as always. I tin the new connector pins with a bit of solder to give me a little extra cushion for connection. Just a suggestion, I was getting nervous with that second reheat on a sandwich board. 😅
I concourre.
Brilliantly done Sorin thanks 😊
Good job mate 👍
Sorin Says: You never see Me clean and change solder with low melt. Great job and the best for you.
Amazing work sir
Great job i'm doing the same technique for FPC connecteur 👌
Excellent content. Thank you very much.
Haha 8/10 😂 This is like 11. The components are so small and you risk burning them.
Finally After Long Time i see A Good Microscope Video Quality on your channel ...😍😘
fantastic work,very clean,,congratulations
Like you always say: Beautiful!
Excellent Remove without flux or rosin.Great Skills👍
Excellent, subscribed
I love the way You speak about devices...Ooo, we have a niiiice laptop, niiice board, niiice phone, i was expecting we have a niiice new battery😂😂😂It is so typical for You, that it is strange If somebody say the same sentence😂And finally...Great job like always😊👍🏻
1st time in past few year sorin wicked before soldering 😮
nice work
Nice job👌
Good job sir
nice vid. what air speed do you use on the hot air?
Hi Sorin, I realy like your black piece of carpet with the red outline. Is seems quite heat resistant. Could you please share a link where to buy this?
He got it as a gift..😍
Well I'm not such a solderexpert as you but I think I can say I have 4 decades of expierience. What I learned I think that it is very important not to stirr or vibrate de solder during solidifying. it will appear as a dull surface and is much more britle. I remelt dull solderjoints.
How weirdly convenient, I've just bought one.
Sorin, where and when do you stream ? Id love to join in a stream but all I ever see is your coffee time livestreams on youtube!
maybe there's a monster inside 😂😂 love ur vibes god bless u
تحياتي لك صديقي سورين فقط ملاحظه صغيره استخدم قصدير سائل منخفض الحراره حوالي ١٤٠ ممتاز لهذا نوع من التثبيت انا استخدمه في صيانه الايفن
Wonderfull job sir u r an inspiration.u cant imagin how hard it is.i still have problem geting a 3 pin sot223 triac alligned
use more flux it will help you , one pin only then others :)
@@corel965 i do i use lots of flux one pin then the other. But u cant imagin how much my hands shake
@@yassine1806 practice more and less coffe :)
Smooth
@ 13:51
Would like to know THAT USB charger (with the LED LCD display) which one it is (& where to buy). 😍🤔😏
Solid. Solid. Solid.
Salut. De care cositor ai folosit? Cu plumb sau fara?
This a great job
did burn the plastic always so I need 10 pieces to fix it😂
Was curious what you used to glue the back frame and your method with the claps to complete the repair.
It's most likely B7000.
there is a precuted both sided tape that goes around frame nothing special :)
Do more phone repair video Sir🙏
Great example of When to chang solder
Hello🤝good job👍👍👍👍👏👏👏👏👏👋👋👋👋👋
Please 🙏🏽 where can I buy the connector from!!? My Note 20 Ultra's connector suddenly went bad too
NIce video. I have a problem with my A21s now. ive done the old connnector out and bought 5 connectors to try myself again...... so the problem is using flux the connector wouldnt bound with the fresh applied solder. i heated the board some minutes before placing the new connector. Anyone any tips?
❤
i have the same phone note 20 ultra 5g it just stopped displaying my itself but didn't fall down or in water, the flexy and socket seem okay
5:22 this flux would be with isopropyl alcohol. ?
👍👍👌👌
Is it posible to charge the phone with the wireless charger even tho the Connector is broken
i rarely see u soldering plastic connector from the top. how much temperature ?
he said he was using 180°C low melt solder, so probably around 200°C
plastic connector lower than 240 degs
@@t_Gecko 183C is regular pb solder, not low melt solder based on bismuth or indium, just regular solder.
@@modorangeorge4991 true but still regular pb solder melt around 180-190 when i search for fabric soldering it give this : Solder Temp.:235±5℃ Duration: 5±0.5sec
i guess this is the safest temperature) but on my Tinol it giving 190 temperature of melting but suggestion is 340 - 420°C
Ostatnio tak myślałem żeby jak lutuje się takie rozproszone i ruchome elementy. Użyć czegoś w rodzaju wybrujacego patyka. Wysoka częstotliwość wibracji spowoduje że cyna i nóżki przełamią opór powierzchniowy cyny.
hi there sorin, I was just gonna ask how could I identify neither a bios chip is broken or a PCH and CPU is shorted? 😅 thanks
There are videos about that
@@supernova1163 thanks, im having very big doubts its either the SIO chip or the bios chip (the bios chip pads were broken as I was removing the IC with a 200° max. hot air)
Salut Sorin, ce fel de tester charger folosești? FNIRSI de care? Mulțumesc!
Noice
its Sorins Connector
Sorin can please instead of skip some of video..use FF so we can learn every single thing.
I think solder paste might be better and easier for this kind of tiny soldering right?
How much for this service?
how to know it's gonna be lowmelt before you buy it?
You have a melting temperature written on pack like 180c 220c etc... :)
problem I've never seen a temperatuer rating on them here in my country I might be looking in the wrong place thanks for the info👌👍 @@corel965
Для такої роботи я зазвачай використовую станцію нижнього підігріву. Це значно прискорює роботу.
Why didn't you beat the connector from the other side of the board?
You can't because there is a chip there didn't you see the shield.
@@Hejazi1365 What wire is this that you can use.
sir im from india can u send 2fpc for note 20 ultra not available in india i will pay money
Come to Beşiktaş,Sorin..
Does he know the Beşiktaş :) It is a football club in Istanbul, Sorin.
Ofcourse, He knows...He's big fan...@@omersayli
next time remove the camera modules please xD
300 degree and heat it from the bottom ....
yeah that what we do normaly but in his case he can't.. bcs at bottom is shield cover and under it it have chips
🇷🇸❤️❤️❤️❤️❤️🇷🇴
Why you start to pay viewers for your lessons repair.
What flux do you use please?