Wolverine Jig Set Up
Вставка
- Опубліковано 19 жов 2024
- On this week's show, I walk you through the process of setting up a Wolverine grinding system with your grinder.
If you haven't already, please consider liking and subscribing to the channel. While you are at it, don't forget to click the bell so that you don't miss notifications of future episodes of the program. As always, I want to thank you for stopping by the channel and taking the time to tune in to the show. It is very much appreciated.
Thank you for the video, you make my installation so easy
The Lord may be with you.
I'm glad that you found it to be useful. Thanks for tuning in to the show.
This was a great video. I just bought the wolverine jig and this is all I needed to get it set up. Thanks for taking the time to explain everything so thoroughly.
I'm glad that you found the show to be helpful Josh. Thanks for tuning in to the show.
Great video, received my jig today and didn't have a clue how to set it up.
Now I do. Thanks!
Glad that you found the show to be useful Mark. Good luck with your installation and thanks for tuning in to the show.
thank you so much for this video. Means the world to me as new turner having this jig and grinder. I am so happy to find your video and Chanel, super like and subscriber. I will not go into my life story in this comment, but in short... wood turning has been a passion I never pursued, since high school, until the age of 51 after beating cancer and a celebration of life. I purchased a lathe (jet 1221vs and crazy amount of tools). Life has a way of throwing us a curve, and I have not turned on my lathe in over 5 years now (in November). I have this same grinder and wolverine jig for sharpening that I have yet to mount. Thank you for this video as I get back to what matters in celebrating life and living life. I want you to know how much your video means to me and the time you take to edit and post. God Bless.
Glad to have you as a subscriber Glen. It just goes to show that we should always be kind as we never know what someone else is going through. Glad to hear that you are still on the right side of the sod. Thanks for tuning in and for taking the time to leave the kind words. I look forward to your future comments on the show. With over 800 episodes currently on the channel, I'm sure there is something of interest to you.
Got my Rikon grinder and Wolverine system about 6 months ago but haven't set it up yet (don't ask). This was an awesome tutorial for what will now be a piece of cake! Thank you!
You're very welcome. I'm glad that you found the tutorial to be useful. Thanks for tuning in to the show.
This video is a lot better than the instructions that came with sharpening jig makes sense of the instructions . Wolverine should put this video in the package thank you for sharing your knowledge .
Glad to hear that you found the show to be useful Gwynne. It's always nice to know that my efforts of making the show are appreciated so thank you for taking the time to leave such a nice comment. Thanks for tuning in to the show. Have yourself a great day and good luck with your grinding jig.
I really appreciate for your great instructional video! It is clear and encouraging.
I'm glad that you enjoyed it. Thank you for tuning in to the show.
After watching your video I decided to purchase the wolverine jig, can't thank you enough for your expert advice. Walter
You are very welcome Walter and I'm glad that you found the show useful. Thank you for tuning in and good luck with your new jig. You're going to love it.
Thank you for this, my wolverine didn't come with any installation instructions. This was very helpful.
Glad that you found the show to be useful. Thanks for tuning in to the show.
I am the person you are talking about. I’ve recently gotten back to turning. It’s been a while and I was looking for info on the setup of the Wolverine system to make sure I’m using it properly. So thanks.
Glad that you found it useful Mark. Thanks for tuning in and for taking the time to leave your comment. Good luck with your setup.
Best video on the subject I was able to find and watch thru there is some rubbish out there but this was truly great and informative and no BS well done and thank you , all the best
Your comment was the perfect way to start my day and I thank you for that. I'm glad to hear that you found the show to be useful and informative. Thank you so much for tuning in Rosemary and for taking the time to leave such a nice comment. Have yourself a great day and if you have any questions, please don't hesitate to ask.
OMG, I sure could have used this video a couple of years ago. I bought the complete OneWay system when I was turning pens on my wood lathe. I even bought the diamond dressing tool for the wheels. However, yep however, my installation didn't quite go as smoothly as you demonstrated here today. I did get the jig and all accessories installed, but it was a struggle. I taught the dog a few new choice words and he learned to stay inside the house until it was complete. I too built a special cabinet for the new Delta 8 in grinder. The system is great and I still use it. I have since purchased a metal South Bend lathe and restored it. Now my passion is metal turning. First it was all the wood dust, getting into the house, now the metal chips are endangering the cats feet, because the cat has to sleep in the shop due to the territorial dog inside the house . He got here first, so no cats allowed. The cat is a stray the my wife took in a couple of years ago. Someone abandoned the cat when they moved and it was starving. One problem with the cat is that she likes me and wants attention all the time. The wife works hard to keep a tidy ship, so I do my best to keep her happy. If moms happy, everyone is happy. Great video and thanks for sharing...Ken
Well Ken, this is my second installation of this particular jig and the first installation was on a 6" grinder and this one on an 8" grinder. Both went fairly smoothly and I didn't have any cats or dogs to hinder me so maybe that was your downfall. ha ha ha ha. Thanks for the kind words and for the story. I'm glad that you enjoyed the show and that you took the time to leave me a message here. I truly appreciate it sir. Thanks
Great tutorial man!! Thank you!! Your video will make setting up my Wolverine system much easier!!
You're very welcome Larry. I'm glad that you found it useful. Thanks for tuning in to the show.
@@acutabove_woodworkings Yes sir...however, I didn't see anything in your tutorial as to how to assemble the 'work platform', call me a bonehead, but I can't understand how to attach the tightening arm. Third video where the 'work platform' is shown.....already assembled!
@@larryslemp9698 The work platform is easily assembled and there is only one bolt that holds it together. The bolt will travel through the locking handle and before you place it through the woking platform's arm, you will need to install a washer on the bolt. The bolt then slides through the hole in the working platform's arm and threaded in to the integrated nut that is welded into the assembly. Spin the locking arm to tighten and that's it. If for some reason, you are still having problems with it, feel free to contact me over on the channel's Facebook page via PM where we can share some photos and get your platform assembled so that you can start grinding and using your jig. facebook.com/kennyearrings1/
I hope this helps. Thanks again for tuning in.
Thank you for sharing. When I moved I lost the instructions and set the jig up by memory, which was not correct. Now I can set it up correctly. Thanks!
You're very welcome Danny. Good luck with your set up and thanks for tuning in to the show.
Excellent job of explaining the process..
Glad that you liked it Thomas. Thanks for tuning in to the show.
Fantastic instructional video professionally done thank you so much. I just purchased this system and now it's gonna be so easy to install thank you . I had to subscribe looking forward to more videos.
I'm glad to hear that you enjoyed the show and found it to be useful Steven. Thanks for subscribing to the channel. Welcome aboard. There are well over 600 episodes of the show on the channel currently so hopefully, there will be something of interest to you. Thanks for the kind words and for tuning in to the show.
Nice video, thanks. I just bought the One Way tool rest jig and it came with zero instructions. Your mounting instructions will make a perfect alignment jig.
Glad that the video could help you out Fred. Thanks for tuning in to the show.
Very thorough description of installation and video. You should entertain the idea of persuing a career do just this sort of presentation. Thank you for posting. Ps, got the same outfit and love it..Happy turning.
Thanks for the kind words on the show Dave. I truly appreciate you tuning in and taking the time to leave your comment. Thanks.
Great video! Easy to follow and understand.
Glad that you found it useful. Good luck on your setup and thanks for tuning in to the show.
My jig did not come with instructions and I thought no big deal, I’m a handy guy, I wing it and figure it out. Good thing I saw you your video because I would have screwed it up. Thank you for the video and the detailed instructions. Peace!
Glad that you found it useful. Thanks for tuning in and for chiming in with your comment.
This is a really helpful video, thanks very much for posting.
Glad that you liked it Paul. Thanks for tuning in to the show.
Well Kenny I just finished watching this long winded, forever video of yours that seemed that it was never going to end. Ha Ha. Just kidding you. I wrote to you a few weeks ago about the guy's who complain about your video's being so long winded, and gave you my thoughts about some of these people who complain. Well my friend, because you spent so much time explaining this grinding system and getting so detailed in your description of this equipment, you have made up my mind about buying one. I have wanted to get into this stuff for a little over a year. I bought a lathe about three years ago and the tools that came with it (it was a used lathe) were about as sharp as a marble. So I bought a set of Woodpeckers carbide tools, but have always thought I need more that just what you can do with those tools. So I have studied and watched other video's for about year off and on thinking I have to get serious about getting a dedicated grinder and jig to sharpen my own tools. But was never sure exactly what I wanted. Well after watching this I have made up my mind and I am going to get this same setup as yours with one exception. And that is that I intend to get CBN wheels for this grinder. Anyhow Kenny, thanks for another very informative video and setting up of your grinder. I really appreciate this. So again, thanks and keep them coming buddy. Best to you and yours.
Jim
I would love to get the CBN wheels for my grinder and I have considered it extensively. They do have the advantage of not having to be dressed after a while of use. I'm not a fan of wheel dressing but it is a necessary evil. Either way Jim, I'm glad that this video was able to help you. Good luck on your grinder and grinding jig adventure. Be careful with the lathe stuff.....it's a slippery slope my friend. LOL. Thanks for tuning in to the show.
Well produced and presented.
Glad that you liked it Stephen. Thanks for the kind words and for tuning in to the show.
Absolutely awesome job! You definitely have a gift for teaching/explaining. You stay to the point and make sure that we have every chance to understand the information by presenting it in a couple of different but very effective ways. Thank you so much for this. I have been putting off getting the system because I was so unsure of how to set it up with my grinder. I have heard exaggerations about how complicated the process is and you have set me completely at ease with the reality of the process. Once again Thank You!
You are most certainly welcome Scott. I get a lot of comments on the show about my way of teaching. I love the way that you explained it as apposed to those who just say I talk too much. LOL. Thank you for tuning in to the show and for taking the time to leave the kind words. It is truly appreciated. Good luck with your installation.
I am about to install a grinder. You were very helpful. Thank you very much.
Glad that you found it useful. Thanks for tuning in to the show.
Fabulous, thanks so much, very helpful, answered all my questions. Cheers from Australia 🇦🇺
I'm glad that you found the show to be useful Lisa. Thank you for tuning in .
very helpful video, thanks so much for making it.
You are very welcome Richard. I'm glad that you found it helpful. Thanks for tuning in and taking the time to leave me a comment. I appreciate it.
Thank you appreciate the time you took. helped a lot
You're very welcome Chris. Thanks for tuning in and good luck on your installation.
From a few years ago, but still a great video. Great tone of voice to give instruction and explained everything. I'm about to go have some fun with my new Wolverine Jig after i set it up. Thank you.
Well I hope that you found the video to be useful Tyler. Good luck with your jig setup. It really is a spectacular sharpening jig for the grinder. Thanks for tuning in to the show and taking the time to leave the kind words.
Thank you so much for this info, very helpful
I'm glad that you found it useful Jaime. Thanks for tuning in and for taking the time to leave your comment.
thank you ,you saved me hours of time .GM
You're very welcome George. I'm glad to hear that you found the show useful. Thank you for tuning in.
My 1 HP Rikon and Wolverine jigs are being delivered tomorrow. I can’t imagine finding a better video to help me setting them up than this one. Very clear directions. Thanks so much!
You're very welcome Kevin. Good luck on your setup. I hope you enjoy yours as much as I enjoy mine. Thanks for tuning in to the show and taking the time to leave the kind words.
Great Video. It should be included on the DVD they give you. I am installing the jig today and your advise is priceless.
Thank you.
Glad to hear that you found the video useful Michael. Good luck with your jig and thank you for tuning in to the show.
Thanks so much for this... I've been fussing with this thing for a couple of hours trying to figure out the best way to mount it. You've made it very simple!
Glad that I could help. Thanks for tuning in to the show.
Thanks just what I was looking for
Glad to hear it Buddy. Thanks for tuning in to the show and good luck with your setup.
Excellent! Thank You & UA-cam.
Glad that you liked it Jerome. Thanks for tuning in to the show.
Best damn demo I have found. Thanks for this!
You're very welcome. I'm glad you liked it. Thanks for tuning in to the show.
@@acutabove_woodworkings lol. But I still suck at sharpening! 😆
Thanks Kenny just ordered from lee valley same grinder with steel wheels
Wow, you went all out for the super toys. Those diamond steel wheels look amazing. Let me know how you like them. Thanks for tuning in Joseph.
Great video! Thanks!
You're very welcome. Thanks for tuning in.
Glad I came across your setup video. As I am watching the setup, I am wondering if I set my rig up the correct way! I will need to check!!
I hope you are able to take something positive from this video to help you with your setup Mark. Thanks for tuning in to the show.
From CA, a big thank you for this great instructional video. Very clear and concise.
Glad that you found it useful Nick. Thanks for tuning in to the show.
Since I haven’t yet bought by grinding jig this video was helpful and will be even more helpful when I get one. Thanks and thank your wife for suggesting the idea.
You're very welcome. Glad to hear that you found the show to be useful. Thanks for tuning in and when you get your setup, if you have any questions, please don't hesitate to ask. I'd be more than happy to help you if I can.
Very helpful to have all the detail of fitting the Wolverine jig to the grinder demonstrated so systematically. This will be a big help to me when my Wolverine system arrives.
Glad that you found the video to be useful Melvyn. Thanks for tuning in and good luck with your setup.
Very helpful. Just installed a Rikon 1/2 hp with a Wolverine jig. Made the rookie mistake and mounted the bar holders backwards. Yes there is a left and right.
LOL. Don't worry about the mistake Ruben. I'm sure it happens to the best of us. Glad that you found the show useful. Thanks for tuning in.
Thank you for the tips!
You're very welcome Rob. Thanks for tuning in to the show.
Excellent Job. Thanks.
You're very welcome. Thanks for tuning in
Wish I had seen this yesterday morning before I set mine up. Mine is a Vevor, probably China knockoff, but identical in every way. And cost under $60 on Amazon. Absolutely no instructions were included. I got everything right except for the rubber feet. Which might not be a big deal due mine being mounted on a board that clamps in my vice. I'll look today. Sharpened 1 gouge last night that was a re-grind, after grinding the top of the wings to true up the tool. This is all brand new to me. I got my lathe in December of 22 to do pens for a friend to sell at craft shows.
So far, the score is 20 bowls, 3 candle sticks, 4 vases to ZERO pens. I think I might never turn a pen.
Enjoyed your instructional video and have subscribed.
Glad to hear that you were able to get yours set up even without a manual and a video. Good luck with your future turning. I'd love to see some of your work so if you feel inclined, you can send photos to kennye@acutabovewoodworkings.com. Thanks for tuning in.
@@acutabove_woodworkings
Well poop! Got it all going on... and the grinder spit the bit. Pop, poof and smoke curling out of case screws are probably fatal signs.
@@billrobinson8939 That definitely does not sound good. Sorry to hear this. Is there any warrantee on the grinder?
No. It came from a new neighbor lady who had no need for it. Not a big loss because it slowed down to a a halt while sharpening, even using the lightest touch I could manage. 3/4 hp but only 2 amps might be the problem? Looking for a replacement now . Sticking with 6" due to wheels that I have recently purchased.
Thanks for your attention to my problem, I'm sure you have better things to do, but I appreciate you.
Thank you so much! I read the manual at least 15 times, and was still confused. Also, good thing you removed the dust port. It's just asking for a fire sucking hot metal sparks into a shop vac. Rikon is asking for a law suit!
You're very welcome Joshua. I'm glad that you found the show useful. I'm honestly not a huge fan of that dust port myself but then again, I didn't design it. LOL. Thanks for tuning in to the program.
@@acutabove_woodworkings Just place a small strong magnet at the front edge of the wheel cover and you'll be amazed at what it picks up!
@@TravisOG64 That's a great idea. Kind of like the old trick of placing a magnet on your vehicle's oil filter to catch the metal "dust" that wears off from regular use. Great idea Travis. Thanks for tuning in and chiming in with your fantastic tip.
This was a very well done video. Since I just started in with wood-turning, I needed a grinder and bought the Wolverine system. The directions that come with the product are OK but your video really simplified the process. Thanks for the content.
You're very welcome Ray. I'm glad that you found the show to be useful. Thank you for tuning in and taking the time to leave the kind words. I truly appreciate it.
@@acutabove_woodworkings I received a used mini lathe and wolverine as a gift. What do you like to use to clean the jig to refresh it a bit?
@@kimberlywendt5241 That's a very hard question to answer. It all depends on what is on the jig that is making it look old. Paint, scratches, dust, grime. Maybe send me a few pictures of it at kennye@acutabovewoodworkings.com and I can better answer your question.
Excellent video on setting up the tool rest. I am about to set up the same system except 1/2 HP Rikon and CBN wheel. You have shown me exactly what I will need to do.
Glad to hear that you found the show to be useful James. Good luck with your setup and thank for tuning in to the show.
Very helpful. Many thanks!
Glad that you found the show to be useful Gary. Thank you for tuning in.
I always appreciate your method of explanation, Ken. Thanks
You're very welcome Les. Thank you for tuning in and taking the time to leave the kind words.
Great explanation!!!!.
Thank you
Glad that you liked it Ignacio. Thank you for tuning in to the show.
Great video with really clear explanation - really easy to follow. Thanks from Downunder.
Glad that you liked it Bryan. Thanks for the kind words and for tuning in to the show.
Awesome video. I bought the king 1 hp low speed grinder, and have purchased the Wolverine jig. Your video is very very informative. The king measurements will be different no doubt and will have to do some mods to mounting the jig. Oneway should use your video for directional DVD in how to. I found your video soooo much more informative. Thank you for the tutorial. Sub added.
Well I'm not sure if my show is good enough to be their instructional video but I do appreciate the kind words and sub. I hope that you will continue to find useful and fun content on the program and that you will continue to enjoy the show. If you have any questions, please don't hesitate to ask. Thanks for tuning in to the show and good luck with your Wolverine Jig. I love mine.
Thanks for the informative video; it is well thought out and much appreciated. I am curious as to what tool you like using to dress the wheels. I think the same setup is in my future.
Most people like a diamond bar dressing tool like this one. www.leevalley.com/en-ca/shop/tools/sharpening/wheels-and-wheel-dressers/55075-diamond-bar-wheel-dresser?item=70M5003
Personally, I think they are terrible and am not a fan at all. I prefer to use the dressing tool that is designed to work with this jig. It's a wolverine and it's a little more expensive but well worth it for the excellent results it gives. Here's a link to the wheel dresser. www.leevalley.com/en-ca/shop/tools/sharpening/wheels-and-wheel-dressers/101418-wolverine-wheel-dressing-jig?item=66B0443
And as well, a link to the show where I demonstrate how to use it.
ua-cam.com/video/npJTTYMj-5E/v-deo.html
I hope this helps. Thanks for tuning in to the show and taking the time to leave the kind words.
Super instructional video. Thank you. Subscribed.
Glad to hear that you liked it and found it useful. Thanks for tuning in to the show and if you have any question, please don't hesitate to ask.
Thanks for this video!
You're very welcome. Good luck with your setup and thanks for tuning in.
I noticed that you had to remove the exhaust ports off the grinder to fit the jig underneath. That's why I searched for a video like yours, because the equivalent system I just bought here in Australia must be exactly the same unit just rebranded . I just wish the manufacturer/re-seller would note that in their instructions.
Having an exhaust or dust port on a grinder is not a common thing and in fact, it's kind of dangerous in my opinion. Having a grinder running with an exhaust hooked up to a vacuum is a good way to suck sparks into the collector and start a fire in your shop. This is the first grinder I have ever seen with an exhaust port on it and I have yet to see another since this one. I guess it wasn't mentioned in the instructions because it isn't a common thing to have. Thanks for tuning in to the show Rob. I'm glad you found it useful and I appreciate you chiming in with your comments.
Yes, very useful, thanks!@@acutabove_woodworkings
This was very helpful. Thanks
Glad to hear that you found it helpful. Thanks for tuning in.
I like you. Thanks for the tutorial.
I hope you found the tutorial to be useful. Thanks for tuning in to the show.
Just got done setting it up.
Thanks so much!
Saved me from pulling out my hair!
You're very welcome Mark. Glad that I could help. Thanks for tuning in to the show.
Hi very helpful video thank you
Regards
Steve
Glad that you found it useful Steve. Thanks for tuning in to the show. It's very much appreciated.
Awesome, I already have that exact same grinder and was going to get the wolverine jig. Now I have excellent instructions on how to set it up.
Well I'm glad that the show was helpful to you Richard. Good luck on your installation. Just remember to take your time and make sure that everything is square to the grinder and you will do fine. Thanks for tuning in to the show and taking the time to leave me a comment. I really appreciate it.
I really appreciate you putting this video together. I’m getting ready to put together the same setup but with a CBN wheel. Cheers!
Glad that you found the video useful Eric. Thanks for tuning in.
Awesome video on the setup of the Wolverine jig! I've watched them all and this gave me the detailed explanation I needed. Thank you!
I'm glad that you liked it Cindy. Thanks for tuning in and for the kind words on the show.
Thanks for the detailed explanation Ken!! Looks like a great set up.
You're very welcome Dale. Glad that you enjoyed the show. Thanks for tuning in.
So how did you initially affix the 1/2" wood spacer to the rest holder parts before screwing them down to the bench?
The 1/2" plywood was temporarily screwed in place on the bracket using some 1/2" #8 screws. Once all the alignments are done, the 1/2" screws can be removed, one at a time and replaced with longer screws in order to get the bracket screwed down the bench. I hope this helps. Thanks for tuning in Nathan and for taking the time to ask your question.
very helpful video. I will be purchasing the Wolverine System shortly and I plan to mount it with my 8" bench grinder that has standard rough and fine wheels. It rotates at 3,500 rpm. Can I ask you, what wheels would you recommend for woodturning tools, and is a slow grinder (1,700 rpm) absolutely necessary or will my current grinder be ok. thanks in advance.
Aidan
A wheel like this www.leevalley.com/en-ca/shop/tools/sharpening/wheels-and-wheel-dressers/32981-cool-grinding-wheels will serve you well for sharpening your turning tools. You just need to remember that these types of wheels wear down faster so a light touch is needed when sharpening. As for the speed of your grinder, you should be fine. A slower grinder is preferred but that it to prevent blueing the steel and losing the temper of the chisel. Just use a lighter touch with the higher RPM and you will be just fine. I hope this helps. Good luck with your installation and thanks for tuning in to the show.
Thank you for sharing great tips see you next time 👍🏼
You are very welcome Tomas. Thanks for tuning in again this week. Always great to hear from you and know that you are tuning in.
Excellent video, well thought out, and explained very well, thank you, you made me a subscriber
Glad that you found the show useful Ernie and I'm happy to have your as a subscriber. There are well over 650 episodes of the show on the channel and I hope that there will be something of interest to you there. Friday's is my woodworking show and Tuesday's can be pretty much anything you can imagine. From wood burning to welding to reviews and rants, you can find it on the Tuesday show. Thanks for tuning in and for the kind words and subscription. Glad to have you aboard as a viewer.
Excellent presentation, greetings from an old Norwegian woodpecker!
Glad that you liked the show Ove. Thanks for tuning in.
Great video Kenny well explained about the set up of this jig.
However i'm slightly disappointed that you didn't show how the Wolverine Blades were made, as i was looking forward to that, and also how did you know i had an Uncle Bob??
ha ha ha just kidding as always.
It was a great video explanation and a very detailed one at that, well done keep up these great videos you are doing, as always.
Barry (ENG)
Well you shouldn't have expected the making of the wolverine claws because everyone knows that they are made from Adamantium and there are very few sources of that and my shop is definitely not one of those sources. LOL. As for the uncle Bob.....EVERYONE has an uncle Bob somewhere along the line. ha ha ha ha ha ha ha. Thanks for the kind words on the show and for tuning in again this week man. Glad that you thought the explanations were up to par. I appreciate the encouragement.
Great video - Beside sharpening turning tools can you sharpen carving knives using this system?
tks
Wes
This system is primarily designed to be used for sharpening turning tools and chisels Wes. I find it a little too aggressive to sharpen carving knives and prefer to use stones and a leather strop by hand to get those sharp. The metal of a carving knife if just too thin and the wheels take away too much material, too quickly. I hope this helps. Thanks for tuning in to the show.
Great job on this video, Wolverine should include a link to your video with each sale, compensating you of course. Thanks for taking the time to create such an easy to follow instructional video.
That's very kind of you to say William. I'm glad to hear that you found the video helpful. Thanks for the kind words and for tuning in to the show.
great tutorial
Glad that you liked it. Thanks for tuning in to the show.
Hi love the video! Need help in one aspect. I have the Rikon grinder but with 1/2hp motor. Question, how important is it to mount the metal bases of the wolverine system 1/2 inch or less from the front face of your mounting board. I was going to have a set back of approx 5inches. To the front of the mounting base due to it being mounted on a grinder pedestal. Why does it need per instructions to be mounted 1/2 inch or less to the front of the mounting board. Thanks.
The clearance at the front of the jig is to give room to tilt chisels and as well, for accessories to be able to clamp properly into the main base. Setting it back by 5" may work for you but you may have issues with some chisel sharpening and some accessories. I hope this helps. Thanks for tuning in.
A really great and useful video. So helpful, just what I needed to set up my cheap toolrest!,
Glad that you found it useful Richard. I appreciate you tuning in to the show. Thank you.
Thanks for this video. Very well explained! I am now ready to install the Oneway Wolverine system to my new Rikon low speed grinder 80-808 which I should receive this Friday. :D
Sounds like you'll have a great setup Claudie. Thanks for tuning in and good luck with your installation.
Dear Kenny, thanks for the demonstration on setting up a Wolverine grinding supports. I do have one question about a part that you glossed over. The mounting of the brackets + bracket spacer? How did you manage to drill holes and insert your screws or bolts through the brackets into or through your bench top? Did you lift off the grinder to give you access? Without that, I can’t see how you could do it because the grinding wheel housing would get in the way? Cheers.
Yes Peter. Once the measurements are taken and you have double checked the accuracy, you will have to move the grinder out of the way to install the brackets as there is no way to get a driver in there to secure the bolts. I hope this helps. Thanks for tuning in to the show and good luck with your installation and setup.
@@acutabove_woodworkings Dear Kenny, that was the only way I thought that it could be done. Preserving alignment will be the challenge but that answers it. Thanks.
Great video Kenny, thanks. It took me a few redos when I put mine together.
Glad that you liked it Bill. I hope you found it helpful. Thanks for tuning in.
Thnx for informative video. What grid wheels have you got on that bench grinder?
The grinding wheels are a 60X and a 120X. I hope this helps. Thanks for tuning in. Glad to hear that you found the show informative.
Well explained, thanks for sharing this video with us 🙏🏼
You're very welcome. I'm glad that you liked it. Thank you for tuning in to the show.
Where did you purchase your 1hp 8" Rikon grinder and if you could give me a purchase price that would help. I am just getting started in wood turning and just bought the wolverine jig and a 80 grit CBN wheel , next will be a 350 grit wheel, I have a old central machinery grinder, + want to get a new one like your, to complete my setup. Thankyou so much your video was excellent. Ron
Glad that you liked the show Ron. I purchased my grinder at Lee Valley. So far, in the time that I have owned it, I really like it and haven't had a single problem. Here's a link to the grinder. www.leevalley.com/en-ca/shop/tools/sharpening/power-systems/76585-rikon-8-inch-low-speed-grinder?item=03J7440
I hope this helps. Thanks for tuning in and good luck with your turning.
Thanks for the info, very timely for me. I am just now re-drilling my old board from my old grinder to fit my new grinder and hoping I get the old wolverine brackets to match the measurements.
Glad that you found the show to be helpful. Thanks for tuning in and taking the time to leave a comment. Good luck on your setup.
Great video. I'm currently looking to purchase this setup from LeeValley.
Glad that you found it useful Sean. Thanks for tuning in to the show.
@@acutabove_woodworkings keep up the good work!
Your wife had a great idea having you video the Wolverine Jig setup. I don’t understand the reason or logic of having a dust port on a grinder. Even the temptation of hooking a grinder to a dust collector could be a fire hazard. To direct sparks or metal chips fine but the outlet shouldn’t be made compatible with a hose....just my two cents. I liked the video and the effort you put into making everything fit right for the best results. Thanks for sharing.
Thanks Paul. I appreciate the input. I agree whole heartedly about the dust collection. A fire hazard is just one of the problems that I think it could create but there are others as well. It doesn't really affect my grinder as I have removed it from the machine on both sides. Glad that you enjoyed the show my friend. Thanks for tuning in.
It is worth noting that in a metal working shop there is almost zero risk of a fire hazard from the dust collection..
Thank you! The jig comes with a DVD, but how on earth am I going to play that in 2022? I appreciate the overview. It makes going through the written instructions much easier.
You're very welcome. I'm glad that you found the show to be useful. Good luck with your installation and thanks for tuning in to the show. It is very much appreciated.
Is that the Rikon 80-808 low speed grinder? Great video too !
It is definitely the 80-808. Good eye David. Thanks for tuning in to the show.
Awesome video years later lol
Glad that you liked it. Thanks for tuning in .
Intricacy explained mate 👍👍👍
Thanks for the kind words Sumo. Thanks for tuning in
Thank you very much for the informative video ! I would be installing the Wolverine this week & your video is really helpful ! I have ordered some 10inches turning tools & they are on their way. I already have 7 inches tools at hand. (entire length). Do you think I can use the Wolverine to sharp tools as small as 7inches ? (maybe using the platform ?) Thank you very much!
I am not sure about the minimum length that a chisel can be sharpened with the guide but as you pointed out, if it is too short, they can easily be sharpened using the grinding support that comes with the jig. It's a much safer way to sharpen smaller chisels. I hope this helps. Thanks for tuning in.
Thank you for the video. Why did you sink the feet in? If you bolt it in, won't it stay put without having to do that?
Mounting the grinder with the rubber feet attached just wouldn't work. The rubber feet would just compress and eventually, wear to the point where the grinder wouldn't be stable on the bench any longer. The problem with removing the rubber feet is that they also double as the screws that hold the dust cover plate on to the bottom of the grinder and the electronics are all attached to the cover plate so it was just easier to sink the feet into the table in order to have to body of the grinder sitting flush on the table. It gave it a much more secure mounting and it wont compress the rubber feet, should I ever decide to move the grinder and use it for a different purpose. I hope this helps. Thanks for tuning in to the show and for taking the time to ask you question.
@@acutabove_woodworkings Thank you for the reply! I was curious because I am doing the same setup with a Rikon Low speed 8 inch grinder.
However, although the bolts holding the bottom plate on went through the feet, I was able to remove the feet, and then remove the bolts from the feet and reinstall the bolts without issue. Maybe they are slightly different models. Thanks!
Edit: It appears you have the 1 HP model and I have the 1/2 HP model. Mine has a black base, and I had to raise the grinder up higher, not the grinding jig base, in order to get the correct height.
@@53iBro Glad to hear that the mystery was solved. Thanks for the follow up.
I was going to mention just got Wolverine system and my grinder wheels do not line up with the diamond on the plate. Can I add spacers to the wheel so it can come out more?
Adding spacer is possible IF they are made specifically for that task and IF your arbours are long enough to still have sufficient threads for holding the wheels in place. If you don't have those two factors in place, you may need to get creative with your installation. I hope this helps. Thanks for tuning in to the show.
Question: When aligning the bracket front to back, wouldn’t it be better to align from a fixed point such as the motor shaft since the grinding wheel will get smaller in diameter over time? The shaft does not change position, whereas the grinding wheel gets smaller over time and change the angle of grind. Or, am I missing something here?
I understand what you are saying but in this instance, it has no bearing on the installation. The insert moves according to which chisel you are grinding. It is set each time specifically for that chisel and therefore, it also compensates for the wheel getting smaller. The angle of the grind does change and the wheel gets worn, but the arm assembly slides in and out to compensate for that wear. I hope this helps. Thanks for tuning in to the show.
I had the same question
I just got the same set up last week! Haven't set it up yet! Great info for sure! 👍👍 Thanks for sharing Kenny!
You'll love the setup Bill. I'm glad that this information was useful and timely for you. Thanks for tuning in to the show and if you have any questions at all, please don't hesitate to ask. I'd be more than happy to help you out if I can.
Thanks Kenny!
You are very welcome Bill. Have an awesome weekend.
Did the screws go through the plywood base? Countersunk through the base?
They did not go through the base. They were measured long enough to stop just short of penetrating on the other side. I hope this helps. Thanks for tuning in to the show.
What about a good way to catch sparks? I have a lot of sawdust and sparks the same area. I am thinking about a pullout tray ( cookie sheet) below the platform.
Also doesn't the rubber feet absorb some vibration?
Do you true the sides if wheels unbalanced?
Thanks!
Using a tray of some sort to catch the sparks from this grinder would be fine, as long as the tray didn't have sawdust in it. I think the key here would be to reduce the sawdust with better dust collection as it's better to remove the fuel source of the fire than removing the ignitor. Either way, a tray would be fine. As for the rubber feet and the vibration, you are right that they are designed to reduce that but I've never had a grinder that ran so poorly that it needed vibration reduction. With that being said, I've also never had to true the side walls of a grinding wheel. Purchasing better quality wheels is key as they are "tested" for general balance at the manufacturer. Now I've had to true the grinding surface of the wheels hundreds of times and that is all just a matter of regular maintenance. I hope this helps a little Cliff. If you have any other questions, please don't hesitate to ask. Thanks for tuning in to the show.
@@acutabove_woodworkings Got a Delta variable speed comes with 60 and 36 grit aluminum oxide bits- should I return it for the slow speed rikon with 60 and 120 grit white alum oxide?? Book teachers confirm both options.
@@singtst The 36 grit seems a little coarse to me but it will still do the job of a rough grind of the chisels. I think what you need to consider here is which grinder you like better. If you prefer the Delta grinder, it may be better to just purchase a new grinding wheels for it as opposed to replacing the entire grinder. That would be my choice anyway. I hope this helps.
Think magnets.
For anyone else new watching this video you can remove the screws from the feet on the Rikon & just take off the rubber & put the screws back in that hold up the plate. They pop right out of the rubber with the washer
Thanks for chiming in with your suggestion and for tuning in to the show.
The wolverine jig looks better than the Veritas offering. There is a special felt wheel called the "Veritas formed felt wheel" that you apply honing compound to. It essentially has strop concours for wood carving tools. An ordinary felt wheel does not have these contours. It fits a 5/8 arbor grinder like this 8 inch Rikon. Allows you to hone on one side, and a a cbn or else a norton wheel on the other side.
I do own one veritas felt wheel but it is the 8" flat and I do use it from time to time to give a quick honing of a blade or chisel. I find that for my lathe chisels though, the low speed grinder is wonderful for the lathe chisels. I truly love this setup. Thanks for tuning in to the show.
@@acutabove_woodworkings Have you done any Intersia projects yet? Turning tools are the main reason for a bench grinder however as you say the slow speed grinders offer less risk of over heating. I read a Henry Taylor pdf that said that their wood carving tools are factory sharpened at 3500 rpm which means that they used the regular speed grinders and something about being careful. That is actually reassuring to people who now all have slow/low speed grinders.
It is actually a 6 inch felt wheel that is shaped, not 8 inch, no idea why. Is the technology changing that quickly? It probably will still work fine since it is not a cutting wheel but Veritas should do an 8 inch version. Where is what is his name. Veritas and Lee Valley try to produce their own tools for everything out there but it might not always make sense although some of the market share is their territory. It has to please people that adopt to the most popular items but when a paradigm shift occurs, it is up to the individual to sort out everything.
@@HPCthulhu2011 I've done many intarsia projects over the years. Not so many on the show however. My most recent intarsia style project that was on the show was a recipe box that looks like a loaf of bread. Here's the link. I hope you like it. ua-cam.com/video/pkgfabFAVA4/v-deo.html