A friend of mine recommends, if you're getting corrosion on the outside, you're getting accelerated oxidization ... you could use vaseline or spray paint. Always love your videos ... keep up the GREAT work!
Thanks for sharing , that is very nice it could help in the storm black outs , put them around the place. now I will have to try it . take care you two.
Connected in series, the voltage is increased but the amperage remains the same throughout. Connected in parallel, the amperage is increased but the voltage remains the same throughout.
@@texacalian9289 Yup. You'd connect a number in series to get the voltage you want. Then connect those groups of batteries in parallel to get the amperage you want.
thanks for the video .another way to bump the voltage on these batteries is to add some heat . heat from a light source = sun or light bulbs etc will sometimes recharge the cells back to a higher voltage.
hello, an easy way to stack these in series or parallel is to get some 5 minute epoxy and some old plastic ice cube trays. put your batteries in the tray and pour in some epoxy to form a holder and you can ''stack'' the batteries from there. an easy holder that won't corrode. use plastic though, as the metal ones will corrode and short out.
I also plan to see what happens if I make a series of copper tubes with magnesium sticking out both ends, cap the crystal in on both ends and wire them together in series. I'm hoping to get 12 volts. Then make a bank of those to wire together in parallel to see how much it would take to get a few amps at 12 volts. Compare size and weight to Li-ion and lead acid. I'm currently 100% off grid.
builtrodewreckedit about 2300 pounds of crystal will be equivalent to a rapid cell phone charger, but 5.5 pounds of crystal can keep an iPhone 5 running in standby mode. 68 pounds will give you enough for continuous talk time. all of this assumes no losses with a 100 percent efficient transfer of power to the cellphone.
I've been working on these for a couple years now... I can tell you that they do work. But the copper tends to get a build up of corrosion and splits as the crystals push out. To eliminate this I have been working on a non copper non magnesium battery.
Instead of cooking a whole pan full for one battery then fighting to get the core in after you fill the copper, try placing a wood or rubber wafer in the bottom then placing the core inside the copper then sift in a layer of salt all around with the copper fitting sitting in the hot pan. Just stir with a toothpick as it melts directly in the copper fitting adding layer after layer. Then use a heat gun to melt the middle and top layers as it gets filled...then drop into a shallow tray of cool water to set faster. Run a charge through it while the crystals set and they will form a much better alignment as they harden and give you better results. I'm going to try capping off the top with a layer of resin to see what closing in the crystals will do.
I tried conecting the positive of the cristal to the POSITIVE, yes I wrote positive, of a battery in series and I got a extreamly slow voltage drop across the battery that didn't conform to Ohms law...
If you can power LED's then you could get some sort of moving device to power up some peizo devices (check amazon) hooked into a battery, and create a motor..to run a generator.
I tried this only I preheated the copper and magnesium with a torch ans handle it with pliers so that I could get a much longer working time with the crystal paste.
What do you mean? If you hook a bunch of them together in parallel, it would increase amperge. Then hook it up in series, it will increase the voltage. Relax and you will be okay. I would think you just buy some plumbing copper pipe and it doesn't have to a cup. Just sit the pipe on wood with the magnesium inside just the same. this way the magnesium and copper is kept apart and not touching which is the point. Then just fill it with your solution afterwards.
Hello great video! Have you ever used or heard of the cylinders of Pharaoh Pepi II? They are made from copper and zinc cylinders filled with quartz crystal when held produce electrical energy starting at .6 volts and will gain .02 volts every minute held. Make them yourself or get them on amazon or etsy called "cylinders of the pharaoh"
That's great but who wants to stand around all day holding them..lol..we don't have free servants like Pharoah did..how about put a candle under one and see it that works.
Mine too...but I had more research n it's all about ionic bond n covalent bond...first discovered n invented by John hutchison...working on the principle of casmir effect a common mineral treat in certain way produce endless electricity it's called petrol electrical effects...
If you put several together, - to +,- to +... that makes a series circuit and the amps stay the same but the volts add up. This shows how to weld solder tabs on + and -. ua-cam.com/video/WSXHO7C1vaM/v-deo.html
A friend of mine recommends, if you're getting corrosion on the outside, you're getting accelerated oxidization ... you could use vaseline or spray paint.
Always love your videos ... keep up the GREAT work!
Great job very easy to understand. It's the best I've heard the concept explained.
Share it with the world...........I like that. Thank you for sharing.
Very neat system. Im writing this down for science class for the kids homeschooling
Thanks for sharing , that is very nice it could help in the storm black outs , put them around the place. now I will have to try it . take care you two.
Wow! That's cool Ky. Thanks for showing us that. I think i'll give it a try.
Connected in series, the voltage is increased but the amperage remains the same throughout.
Connected in parallel, the amperage is increased but the voltage remains the same throughout.
Can you make some in parallel and some in series and connect them together to increase both?
yes. but that can get dangerous.
check this out ua-cam.com/video/c0QvbThCxm4/v-deo.html
1000 volts with 9 volt batteries
@@texacalian9289 Yup. You'd connect a number in series to get the voltage you want. Then connect those groups of batteries in parallel to get the amperage you want.
thanks for the video .another way to bump the voltage on these batteries is to add some heat . heat from a light source = sun or light bulbs etc will sometimes recharge the cells back to a higher voltage.
That's awesome. Thank you for sharing. I can't wait to try it out.
hello, an easy way to stack these in series or parallel is to get some 5 minute epoxy and some old plastic ice cube trays. put your batteries in the tray and pour in some epoxy to form a holder and you can ''stack'' the batteries from there. an easy holder that won't corrode. use plastic though, as the metal ones will corrode and short out.
Pretty slick Ky!! Thanks for sharing!!
Awesome! More videos about this would be cool!
Way cool ! .
Great job, Ky !
I have never heard of that formula.
See John Hutchinson method using piezoelectric as well
I also plan to see what happens if I make a series of copper tubes with magnesium sticking out both ends, cap the crystal in on both ends and wire them together in series. I'm hoping to get 12 volts. Then make a bank of those to wire together in parallel to see how much it would take to get a few amps at 12 volts. Compare size and weight to Li-ion and lead acid. I'm currently 100% off grid.
You gotta make some videos with the results, very curious, and not to mention to spread the word energy is free!
WOULD ADDING SUGAR TO THE MIX COMPLIMENT THE EFFECT OF WATER?
Coat the inside with silicone grease it helps with corrosion! I’ve used it for my older cells.
might be fun to test how many together it would take to charge a phone over usb... make a small power brick for charging continuously
It might 4 or 5 in a series to make 6+ volts
builtrodewreckedit about 2300 pounds of crystal will be equivalent to a rapid cell phone charger, but 5.5 pounds of crystal can keep an iPhone 5 running in standby mode. 68 pounds will give you enough for continuous talk time. all of this assumes no losses with a 100 percent efficient transfer of power to the cellphone.
Or charge a battery night and day and run things off of that. Unplug the devices at night to recharge the battery fully.
Who is this man and dose he make videos? More people need to know this stuff!
Crystal cells invented by John Hutchinson
I've been working on these for a couple years now... I can tell you that they do work. But the copper tends to get a build up of corrosion and splits as the crystals push out. To eliminate this I have been working on a non copper non magnesium battery.
Make a video and share your results! :)
What happens if you put a candle under one of these, and get it warm? Or pressurize one in a can or jar? With a magnet..
Thank You
How about adding galvanized bits of Metal to Salts( Crystal)will
It boost Voltage?
Instead of cooking a whole pan full for one battery then fighting to get the core in after you fill the copper, try placing a wood or rubber wafer in the bottom then placing the core inside the copper then sift in a layer of salt all around with the copper fitting sitting in the hot pan. Just stir with a toothpick as it melts directly in the copper fitting adding layer after layer. Then use a heat gun to melt the middle and top layers as it gets filled...then drop into a shallow tray of cool water to set faster. Run a charge through it while the crystals set and they will form a much better alignment as they harden and give you better results. I'm going to try capping off the top with a layer of resin to see what closing in the crystals will do.
Is their a way to stack and wire into a 120 volt bank I want 4 of them?
I tried conecting the positive of the cristal to the POSITIVE, yes I wrote positive, of a battery in series and I got a extreamly slow voltage drop across the battery that didn't conform to Ohms law...
If you can power LED's then you could get some sort of moving device to power up some peizo devices (check amazon) hooked into a battery, and create a motor..to run a generator.
Pretty cool keep up the experiments
Cool vid! Thanks for
excellent .
I tried this only I preheated the copper and magnesium with a torch ans handle it with pliers so that I could get a much longer working time with the crystal paste.
excelent, good video.
That's really cool, I hadn't heard of this before. Gonna be playing around with these for sure. :) Thanks for sharing!
will it work without the alum?
reason i ask is alum is really expensive where i live.
Alum acts as an electrolyte n it's ionic bond...u can use everything but voltage will drops
I wonder how long this would power a 20ma LED?
What do you mean?
If you hook a bunch of them together in parallel, it would increase amperge. Then hook it up in series, it will increase the voltage. Relax and you will be okay.
I would think you just buy some plumbing copper pipe and it doesn't have to a cup.
Just sit the pipe on wood with the magnesium inside just the same. this way the magnesium and copper is kept apart and not touching which is the point. Then just fill it with your solution afterwards.
Magnesium is hard to come by here in my country. so, would the aluminum work as good as magnesium ?
I believe I have seen someone use aluminum for this as well.
Does that really work?
+Alex Del yes, if you watched the video you saw it work lol
How many amps? Why doesn't anyone show the amps only the volts
What is No Salt Substitute
Potassium chloride ionic bond
where are you from? I hear the cajun accent!
I want to make one
What exactly is the no salt substitute?
Terry Vickers KCl (potassium chloride) but regular salt should work as well
right on dude ! thanks
Hello great video! Have you ever used or heard of the cylinders of Pharaoh Pepi II? They are made from copper and zinc cylinders filled with quartz crystal when held produce electrical energy starting at .6 volts and will gain .02 volts every minute held. Make them yourself or get them on amazon or etsy called "cylinders of the pharaoh"
That's great but who wants to stand around all day holding them..lol..we don't have free servants like Pharoah did..how about put a candle under one and see it that works.
My battery drops down to zero volts, any advice?
Mine too...but I had more research n it's all about ionic bond n covalent bond...first discovered n invented by John hutchison...working on the principle of casmir effect a common mineral treat in certain way produce endless electricity it's called petrol electrical effects...
Seg Generators free energy. 😊
may try putting in the sun
make large ones a battery/capacitor man.. the bigger the more amperage, the more in series the more voltage.
Does he have a channel?
+laugh out loud he has tons of other videos on this channel. Check them out
If you put several together, - to +,- to +... that makes a series circuit and the amps stay the same but the volts add up. This shows how to weld solder tabs on + and -.
ua-cam.com/video/WSXHO7C1vaM/v-deo.html
John bedini said add water to recharge
No salt substitute is pure msg (mono sodium Glutamate)
Awesome
kool
😍😍😍
Wow
Just asd some baking soda and water then whip
its funny its called a joule thief and your using crystals ahahaha
Shit you do when your spun😸
I like to be funny 😤😒😂
😂😂😂😂😂it's not working