I wonder the same and even more so the battery life it has. I have a scwalhbe airmax pressure gauge and that battery dies waaaaaaaayyy to fast. Like I put in a new battery, use the gauge, put it away and the next time I wanna use it not even a month later it's already dead again. Stopped using it as well those button cell batteries don't come cheap.
Yeah, you beat me to that. I will also mention that my first one became so erratic that I tossed it. My second one gives an erratic reading maybe one out of five times. There must be a better gauge.
Pretty sure its the "Tune" button, for anyone reading comments about this. I use it when I get to the top of a climb to drop to my preferred pressure for the descent. Accurate air pressures have made my riding experience much more consistent. I get the same feel each ride/run, unlike the finger-pressure-test-guess. And, going 'too low' has consequences where I ride.
I have the Topeak pressure gauge. It works great, highly recommend. It will update in real time while bleeding. There is a separate button to enable that (top left, looks like a spiral).
Actually the Topeak Pressure gauges does update in real time when you deflate the tire. You just need to press the "tune" button before deflating: the display starts to blink, and the reading is updated in real time.
Ronald Tartaglia A few months ago someone stole my bike, I had my helmet on it and they didn’t steal it, it was a $60 giro helmet. Weird that they didn’t, but not complaining.
If I saw your Giro helmet readily available to steal, you'd probably come back to find I'd left another 3 of the same model beside it, or I'd give you my Bell Super 3 so you can stay just as miserable. I'm yet to own a helmet I actually like.
The way you use a clug, low with both wheels on the ground, is great. I've had two bikes fall, though, mounting front wheel high. These were road bikes with narrow tires, which may be more susceptible to losing the grip as the tires slowly lose air.
Hey seth just wanted to say I just found your channel yesterday and I’ve been watching a bunch of your videos since then. I’m really stoked that I found it because I just got back into mountain biking after not riding since I was around 12. Just moved back home after being in the Marines so my 3 month son can grow up around his family, I’ll definitely be taking him out mountain biking when he’s older. I can’t believe I took so much time off.
As somebody who bought a Fabric water bottle last year, so far the durability has been well worth the price. I’ve been riding more and more difficult trails on my new hardtail in the last month and a half and it still holds up just fine. Granted the bottle itself isn’t huge so that can be a limiting factor, but otherwise it’s a total steal.
Bought the clug. Mounted it to my sprinter bumper. Love it- hate it when people kick it and ask- “what’s that for?” Also bot the overpriced chain you recommended- love it. And the chain tool. Thanks so much for the video. 🤘
Ha ha, I've got real hair from my cat balled into a little disk for sound. Haven't tried it yet, but it looks just like what you have on yours. P.S. My cat isn't dead.
I watch a lot of UA-cam videos and I love the way you do product reviews. Don't get me wrong I love all your videos, but can't wait to see more of your take on products.
This video has a lot of growth potential. I see a firm upshot of views. The length of it is also impressive, longer than average. My girlfriend was impressed.
Hi Seth, thanks for this great vid. I have the topeak minitool without the bottle cage and I think you can loosen up the screws that hold it together for making it easier to flip the bits out. I remember you can do it with the included chaintool so you dont need any other tool. Sorry if its bad englisch, i'm from Germany. Keep up the good work!
Hey seth im a new fan of the channel recently i fell of my track bike and broke my elbow i missed two of my rowing reggatas and your videos cheered my up i cant wait to get back to mtb and track.
I have an old-school Topeak Power 21 that's 20yrs old & JUST broke...the chain tool. (Lost the wire to hold chain in place - easily replaceable with a piece of wire hanger!) I found a whole replacement tool (minus the wire) for less than 15 bucks. One of my best purchases ever! (And all I really have to replace is the part that screws in & pushes the pin!)
Tip for the Topeak Mini 20: Cut out a small rectangular piece of electrical tape and put it around one allen key (the middle one), now you have a tab to pull out the key (and the others normally come along by friction)
For strapping things I use a fabric dog collar. Cheap, highly adjustable and easy to clean. Also don't waste your money on digital pressure gauges. Analog will always be more accurate and will last longer.
The Topeak does have a live pressure update setting for use while bleeding. Press the upper black button and the display will start to flash. When you bleed in this mode, the pressure will constantly update and you get an exact reading each time you let off on the bleed button. I used this feature today. I run plus tires, so the pressures are low and need to be accurate, and the Topeak is better than practically all floor pumps for this. I keep one and a good hand pump in my gear bag. That combo is far less bulky and more accurate than a floor pump
Hey Seth i just wanted to tell you how happy i am, i just got a new job (i'm 14) at a local bike shop, i was lucky enough to get this job and after 90 days i can get any Bike in store for 50% off, any recommendations on Giant and or Santa Cruz Bikes ( i currently ride a BMC Speedfox SF 02) cant wait to hear from you!!
Santa cruz. The free bearings for life are worth it, and they have a lifetime warranty. Get a Hightower or HTLT. If you're on a budget, the aluminium Nomad is a sick bike, can handle anything and everything.
8:21 The only time I needed a 10mm hex so far was when I removed a kickstand from a vintage trecking bike. So I guess if you see someone on a trail with a kickstand and you rush to save them from it, this counts as an emergency tool!
I got the mountain bike tool/bottle cage. It is really good value. It saved me from a long walk home when my derailleur met my spokes last weekend, and was extremely effective with every tool I used on it
Cool trick: you don't need a chain tool to snap in the master link. Just hold the rear brake and torque the crank arm. The chain will engage and pull the master link into place.
The pressure gauge is great! I love mine. And if you press the 'tune' button the pressure DOES update in real time. The screen will flash and the pressure reading goes down when you let air out. I have to do a long road climb to get to my local trails so I like to run higher pressures when I leave the house and then take pressure out when I get to the trails.
Great vid; the Hiplocks are used often here in the Uk, they’re to secure you’re bike whilst it’s still in view of you I.e at a coffee shop (outside), or a burger truck, or checking out some trail you can’t take your bike down, but can still see the bike in view. Little piece of mind I....
"If you helmet has this on it and someone else's doesn't, they'll steal someone else's.... ...and then they'll steal yours" More accurate description of that product
It's generally true that for crimes of opportunity, thieves will go for the thing that is easiest to steal, and in this example, it is far easier and less conspicuous to casually walk by and grab an unsecured helmet than to draw attention to yourself by cutting a security strap.
Hey I got a cheap replacement for the mic covers on the GoPro. You can get fake moustaches and cut them and stick them on the mic holes they work just as well and you get like 8 moustaches in a pack for less an £1
I use mineral wool (inner wall insulation) and self adhesive velcro (i trim them in pretty much the same shape as the adhesive gasket of that thingie in the vid) for wind covers. This will last a bunch and you can get mineral wool trimmings for free and 3M velcro for like two bucks, the velcro will stay there pretty much forever and the wool is virtually free to replace and on top of that it's hydrophobic and fireproof.
+1 on the Topeak digital gauge. My Fabric water bottle has held great for over a year including runs down Greens Lick and Kitsuma. It's design just doesn't work well for quick swigs while riding. Too hard to remount without looking. For GoPro mic noise their "Windslayer" works AMAZINGLY well. Doesn't fit for gimbal users but everyone else I highly recommend.
@Seth's, at 9:23 you say the pressure doesn't update in real time when pressing the bleed valve, but It does if you press the "tune" button (numbers starts blinking). Try It!
Thank you for all the dedication you put for videos! They are great and so fun to watch, I just started to mountain bike so your tips and tricks have helped a lot along the way
When I get a steel frame set I'm getting that fidlock bottle set up. I think it's genious. I first saw it here I think. I recently watched a GCN video where they talked about it and I needed to see a more in depth video of it. Thanks.
go to the hardware store and get like 2 meters of hose and a couple of U bolts (you use the hose to cover the U bolts so they don't scratch your stuff and also it prevents it from shifting around). Now you can attach a rifle if you wanted to.
The point of the hiplock is low weight, compact dimensions and ease of use. It's literally meant for nothing more than preventing a random person walking away with your bike while you're inside a gas station getting supplies or taking a dump. When you need a lock this compact, it doesn't really matter how it's constructed, it's theft protection will be pretty much the same. For a regular MTB rider it may not sound like a great idea, but for the roadie and gravel crowd who do whole-day rides without a backpack, it's precisely the thing they want and need. Personally been using a couple of locks like this myself for this very purpose. For commuting, I have an actual security lock, but it's too heavy and bulky for my gravel rides.
Hey seth just got one of those pressure gauges and you can press the little circle button and once the number is flashing you can use the bleed button and it updates in real time. they say you should press the button after you bleed air for a precise reading.
Hey Seth, I have the Fidlock and wanted the One ⬆️ pump. I wasn’t sure the two would work together? I figured twisting off the bottle would hit the pump. Good to see this combo works. Great video 👍🏻
A cool hack I found is taking the crap grips that come standard with bikes and cutting them down the middle on one side. Then I zip tied them to my chainstay. Works perfect! Hardly and noise too!
Probably already been stated but... FYI: if you hold down the "target" looking button on the Topeak Smart Gauge, the pressure indication blinks and then updates in real time. Been using mine for 5 years now, I love it.
*Almost snaps ankle* “Did my water bottle stay in?”
Good ol’ Seth
Lol
200th like
340th like
500th like
741st like
The efficiency of any saw is directly related to the length and thickness of the beard of the user. It's science.
its definatly tru im 12 and cant saw beacos i dont have a beard i went on amazon bought a strap on beard and now i can saw like a lumberjack
@@f.b.i3237 then I might get a beard too on the next Friday sale
Hahahahaha
@@f.b.i3237 u ruin jokes
As a Canadian I can confirm this.
Been using both of those Topeak Pressure gauges and Multi-tools for a few months. I can vouch for the quality of them. Well worth the money.
Dang no one even responded phil
I'm subbed btw
Is it easy to change the battery?
I wonder the same and even more so the battery life it has. I have a scwalhbe airmax pressure gauge and that battery dies waaaaaaaayyy to fast. Like I put in a new battery, use the gauge, put it away and the next time I wanna use it not even a month later it's already dead again. Stopped using it as well those button cell batteries don't come cheap.
Woah 5th comment
4:06
Crashes
“Did my water bottle stay in”🤣🤣
"Dude, your bone is popping out from your le..."
"Yeah, yeah, what about my bottle?"
Alex “shouldn’t you get that chec...”
Seth “WE NEED CONTENT!”
Ded 🤣🤣
4:07 when he make a crash all he thinks about is "is my water bottle ok?"
What’s the password?
its on the back
How does he not have any bruises after crash?
That tube exploding was the highlight - made me laugh and sh!t my pants in equal measures lol
SoL Mackay on point
Looks like ditto for Seth! (Or shud that be shitto!)
Rupert Wenn oh my 😂😂
Dude I lol'd for like 5 minutes 😄
Dude I lol'd for like 5 minutes 😄
The Topeak pressure gauge does update in real time, you just need to press the circle button :) your welcome!
Your right it does. Mine does and it's great.. Just over Inflate and adjust 👍🤘
Yeah, you beat me to that. I will also mention that my first one became so erratic that I tossed it. My second one gives an erratic reading maybe one out of five times. There must be a better gauge.
My floor pump gauges are notoriously off, hence the digital gauge. Like the topeak.
On the Topeak smart gauge d2 you can push a button so it shows real time pressure when you are using the bleed valve. I have one and love it.
I noticed this right after publishing on Patreon, and added a note. You guys always fill in the blanks!
I should probably sign up to your patreon then haha
You mean just like the analog ones you can pick up for 3.99 at a gas station?
Pretty sure its the "Tune" button, for anyone reading comments about this. I use it when I get to the top of a climb to drop to my preferred pressure for the descent. Accurate air pressures have made my riding experience much more consistent. I get the same feel each ride/run, unlike the finger-pressure-test-guess. And, going 'too low' has consequences where I ride.
Hey Seth, you usually run 20 in your mountain tires as seen in the video? Just curious.! Recently got the Topeak and love the precision!
4:08 that’s something that normally happens to me even if I’m not doing tricks
Crappie Gamer I feelz bad😂
that happened to me when I crashed into a curb
The Topeak pressure gauge can update while bleeding air. Pressing the tune button puts it in a mode which constantly updates the display.
Yes
Who else is triggered that the clug logo was upside down
I feel like he purposely installed it like that lol
it's quite disturbing
If the logo what the right side up it would be facing the wall and you couldn't see it
IM OCD!!!!!!😡😡😡😡😡😡😡 FLIP IT
R u from aus or not a noataced crisps go blues
I love seeing your videos pop up in my subscription box.
1:17 holy shit that is actually very satisfying and smooth🤤
@I killed that beard guy this is rc films and creations but a different acount.what did I comment?
I remenber now I said that’s what she said
All zip ties are reusable with the right flat screwdriver.
really...
Yep
or knife
Be darned if I could pppppunch in the coooombination to a reusable one in the same amount of time
jessestylex True but if someone's trying to strangle you it's not very likely they'd use a reusable one.
I have the Topeak pressure gauge. It works great, highly recommend. It will update in real time while bleeding. There is a separate button to enable that (top left, looks like a spiral).
Imagine making videos about a product and not even reading the manual.
I'm pretty sure I've binge watched every single one of your episodes. The chain saw is probably my favorite product in this review!
I just got a fidlock and can't begin to express how much i love this thing. Not to mention how cool it looks. Thanks Seth!
That tube man ..bang for your buck eh ;)
macedk hahh
70th like
He was a fool to not wear hearing protection. Hearing loss is cumulative and permanent.
@@KnifeKnut cry about it
@@Lysergic_ harsh yet required
He’s face when the inner tube popped 😂😂😂 literally died!
Used a fabric bottle for over a year not fell out once and threads have not worn best cagelles bottle about!!
craig turpie Same with me. Good product.
Actually the Topeak Pressure gauges does update in real time when you deflate the tire. You just need to press the "tune" button before deflating: the display starts to blink, and the reading is updated in real time.
Wait a minute people steal helmets? Boy if someone wants to steal my sweaty ass stank helmet they need it worse than I do
Ronald Tartaglia A few months ago someone stole my bike, I had my helmet on it and they didn’t steal it, it was a $60 giro helmet. Weird that they didn’t, but not complaining.
If I saw your Giro helmet readily available to steal, you'd probably come back to find I'd left another 3 of the same model beside it, or I'd give you my Bell Super 3 so you can stay just as miserable. I'm yet to own a helmet I actually like.
Ronald Tartaglia my helmet got stolen at school
Ben Fairy Bro same
Ronald Tartaglia O
The way you use a clug, low with both wheels on the ground, is great. I've had two bikes fall, though, mounting front wheel high. These were road bikes with narrow tires, which may be more susceptible to losing the grip as the tires slowly lose air.
With the multi tool you should be able to adjust how hard it is to move tools by loosening the nuts that the tools are secured with
aWildTomAppeared just to add, this is what the small hex key on the chain tool is for
9:40 “ dead cat thingy” 🤣🤣🤣
I was looking for this
I've had the fabric cageless bottle 7 months and have had 0 issues with it.
Hey seth just wanted to say I just found your channel yesterday and I’ve been watching a bunch of your videos since then. I’m really stoked that I found it because I just got back into mountain biking after not riding since I was around 12. Just moved back home after being in the Marines so my 3 month son can grow up around his family, I’ll definitely be taking him out mountain biking when he’s older. I can’t believe I took so much time off.
As somebody who bought a Fabric water bottle last year, so far the durability has been well worth the price. I’ve been riding more and more difficult trails on my new hardtail in the last month and a half and it still holds up just fine. Granted the bottle itself isn’t huge so that can be a limiting factor, but otherwise it’s a total steal.
Seth please do some more unicycling videos because u got one and I really enjoyed ur precious series. Keep up the good work love ur Chanel
Seth please do a update on the garage
Bought the clug. Mounted it to my sprinter bumper. Love it- hate it when people kick it and ask- “what’s that for?” Also bot the overpriced chain you recommended- love it. And the chain tool. Thanks so much for the video. 🤘
Ha ha, I've got real hair from my cat balled into a little disk for sound. Haven't tried it yet, but it looks just like what you have on yours. P.S. My cat isn't dead.
that would be a livecat
I use a piece of kitchen sponge stuck around the mic with glue. Works about ¾ as good as a dead cat.
so the cat isn't dead? but is it hairless now? lol.
Probably brushed his cat
Kris Nordberg great now steps going to get a cat farm just for his cameras
I watch a lot of UA-cam videos and I love the way you do product reviews. Don't get me wrong I love all your videos, but can't wait to see more of your take on products.
This video has a lot of growth potential. I see a firm upshot of views. The length of it is also impressive, longer than average. My girlfriend was impressed.
The smart Gauge does update real time pressure measurement when releasing air if you push the "tune" button while holding it on to your valve
The fabric cageless bottle is incredible, even after over a year of use. Doesn’t drop for anything.
I bought the fidlock because of your review and I love it.
Hi Seth, thanks for this great vid. I have the topeak minitool without the bottle cage and I think you can loosen up the screws that hold it together for making it easier to flip the bits out. I remember you can do it with the included chaintool so you dont need any other tool. Sorry if its bad englisch, i'm from Germany. Keep up the good work!
PadrinoXL ja genau das wollte ich auch schreiben ;)
Your English is better than a lot of English speakers.
your reaction to the tube ballooning is so real!
thanks for the vid!
i must go to sleep... AFTER THIS!
I love people who are honest about products they are given for free thanks Seth!
8:04 cleverlelrelrelrelre compartment xD
Most I've ever laughed in 6 months
He says a clever little lmao easy to miss tho
Lee O'Boyle r/woooosh
I just wanted to thank you for getting me into mountain biking because now I'm addicted
same
You should build an actual dirt jumper
Jacob Neill why the murder machine is unique
Michael Scott the Murder Machine isn’t a dirt jumper.
I just got a fidlock at Sea Otter, and I am absolutely living it!
It can be tough forcing a knobby 2.5 into tight places
Hey seth im a new fan of the channel recently i fell of my track bike and broke my elbow i missed two of my rowing reggatas and your videos cheered my up i cant wait to get back to mtb and track.
6:44 my favourite part😂😂
I have an old-school Topeak Power 21 that's 20yrs old & JUST broke...the chain tool. (Lost the wire to hold chain in place - easily replaceable with a piece of wire hanger!) I found a whole replacement tool (minus the wire) for less than 15 bucks. One of my best purchases ever! (And all I really have to replace is the part that screws in & pushes the pin!)
Love you vids Seth your inspired me to ride all those years ago now it’s my life
Tip for the Topeak Mini 20: Cut out a small rectangular piece of electrical tape and put it around one allen key (the middle one), now you have a tab to pull out the key (and the others normally come along by friction)
You can use “hiplock” to attach an inner tube to the bottom of your saddle instead of Velcro
Great video Seth! also congrats on 700k.
6:43 good ol seth lmao🤣
nice dicc
Can confirm that fabric water bottle is really good had it on my bike for almost 6 months now and it has held up like new👍
No snow in Australia all year round boi! Australia ftw
COOOL
For strapping things I use a fabric dog collar. Cheap, highly adjustable and easy to clean. Also don't waste your money on digital pressure gauges. Analog will always be more accurate and will last longer.
rip berm creek and the first drama drop, you will be remembered
The Topeak does have a live pressure update setting for use while bleeding. Press the upper black button and the display will start to flash. When you bleed in this mode, the pressure will constantly update and you get an exact reading each time you let off on the bleed button. I used this feature today. I run plus tires, so the pressures are low and need to be accurate, and the Topeak is better than practically all floor pumps for this. I keep one and a good hand pump in my gear bag. That combo is far less bulky and more accurate than a floor pump
Hey Seth i just wanted to tell you how happy i am, i just got a new job (i'm 14) at a local bike shop, i was lucky enough to get this job and after 90 days i can get any Bike in store for 50% off, any recommendations on Giant and or Santa Cruz Bikes ( i currently ride a BMC Speedfox SF 02) cant wait to hear from you!!
Go with any Santa Cruz u wont regret it
The giant reign is better for the cost, but if you have the budget get a Bronson or maybe a nomad
Santa cruz. The free bearings for life are worth it, and they have a lifetime warranty. Get a Hightower or HTLT. If you're on a budget, the aluminium Nomad is a sick bike, can handle anything and everything.
i've got a Giant shop near me and they always seem to be the best value for what you get
Get a SC Chameleon
8:21 The only time I needed a 10mm hex so far was when I removed a kickstand from a vintage trecking bike. So I guess if you see someone on a trail with a kickstand and you rush to save them from it, this counts as an emergency tool!
*Gets up from intense crash*
"Yeah Yeah is my water bottle okay!?"
Please use the air compressor clip as a prelude to all of your productions. One of the funniest things I've ever seen!
The thumbnail made me cringe for some reason...
Codymc1497 E WTF IS THIS?! Omgaaaaaagha!!
Agustín Echevarría 🤣
Ye same lol
Condom
Im here just to see if I was clickbaited... but, thinking it well... Im not 100% sure i want to know why that could possible clickbaited me...
I got the mountain bike tool/bottle cage. It is really good value. It saved me from a long walk home when my derailleur met my spokes last weekend, and was extremely effective with every tool I used on it
Cool trick: you don't need a chain tool to snap in the master link. Just hold the rear brake and torque the crank arm. The chain will engage and pull the master link into place.
Am I the only one that got annoyed when the clug was placed upside down
Been using both of those Topeak Pressure gauges and Multi-tools for a few months. I can vouch for the quality of them. Well worth the money.
The pressure gauge is great! I love mine. And if you press the 'tune' button the pressure DOES update in real time. The screen will flash and the pressure reading goes down when you let air out. I have to do a long road climb to get to my local trails so I like to run higher pressures when I leave the house and then take pressure out when I get to the trails.
I loudly laught when that inner tube blew up
Great vid; the Hiplocks are used often here in the Uk, they’re to secure you’re bike whilst it’s still in view of you I.e at a coffee shop (outside), or a burger truck, or checking out some trail you can’t take your bike down, but can still see the bike in view. Little piece of mind I....
"If you helmet has this on it and someone else's doesn't, they'll steal someone else's....
...and then they'll steal yours"
More accurate description of that product
It's generally true that for crimes of opportunity, thieves will go for the thing that is easiest to steal, and in this example, it is far easier and less conspicuous to casually walk by and grab an unsecured helmet than to draw attention to yourself by cutting a security strap.
Hey I got a cheap replacement for the mic covers on the GoPro.
You can get fake moustaches and cut them and stick them on the mic holes they work just as well and you get like 8 moustaches in a pack for less an £1
Another great clip and your face expression was placeless when the tube exploded 😂🤙🏽
When you popped the tube had me laughing for a minute….made me think of the time I exploded a 90 psi road bike tire in my face 🤦🏻♂️🤷🏻♂️🤣🤣
Love the thumbnail
That’s real click bait 😂
I use mineral wool (inner wall insulation) and self adhesive velcro (i trim them in pretty much the same shape as the adhesive gasket of that thingie in the vid) for wind covers. This will last a bunch and you can get mineral wool trimmings for free and 3M velcro for like two bucks, the velcro will stay there pretty much forever and the wool is virtually free to replace and on top of that it's hydrophobic and fireproof.
You can reuse any zip tie if you know how to
+1 on the Topeak digital gauge.
My Fabric water bottle has held great for over a year including runs down Greens Lick and Kitsuma. It's design just doesn't work well for quick swigs while riding. Too hard to remount without looking.
For GoPro mic noise their "Windslayer" works AMAZINGLY well. Doesn't fit for gimbal users but everyone else I highly recommend.
Topeak D2 SmartGauge
RTFM!! It shows pressure in real time! You need to click little button....
@Seth's, at 9:23 you say the pressure doesn't update in real time when pressing the bleed valve, but It does if you press the "tune" button (numbers starts blinking). Try It!
okay now the thumbnail is just wrong
Hahahahaha
😂
Agreed
Thank you for all the dedication you put for videos! They are great and so fun to watch, I just started to mountain bike so your tips and tricks have helped a lot along the way
6:42 that face tho Seth was confused...
ChickenDock6549 Gaming 6:47
Galaxy Plays
Other than I rather have a few secs before instead of after plus this was half a year ago!
ChickenDock6549 Gaming ooooo okay
When I get a steel frame set I'm getting that fidlock bottle set up. I think it's genious. I first saw it here I think. I recently watched a GCN video where they talked about it and I needed to see a more in depth video of it. Thanks.
With the one up edc strap, can you attach a water bottle to the bike with it?
I can't attach a bottle holder to my capra 🤔
you can zip tie a cage to the frame. i did that on my old bike
Zefel make some cage mounts on straps so should go on any bike
Try the Fidlock Universal Base - works with both their 15oz & 20oz bottle.
go to the hardware store and get like 2 meters of hose and a couple of U bolts (you use the hose to cover the U bolts so they don't scratch your stuff and also it prevents it from shifting around). Now you can attach a rifle if you wanted to.
I have fidlock and absolutely love it. Its low profile and functions well. No problems and definitely gets my recommendation.
The hiplok is designed for cafe stops, shop stops, and is basically to stop opportunistic theft- good for roadies
toasty bear even on my old beater bike i would not use that. i could use a lock and some electrical wire and get better theft protection!
The point of the hiplock is low weight, compact dimensions and ease of use. It's literally meant for nothing more than preventing a random person walking away with your bike while you're inside a gas station getting supplies or taking a dump. When you need a lock this compact, it doesn't really matter how it's constructed, it's theft protection will be pretty much the same.
For a regular MTB rider it may not sound like a great idea, but for the roadie and gravel crowd who do whole-day rides without a backpack, it's precisely the thing they want and need. Personally been using a couple of locks like this myself for this very purpose. For commuting, I have an actual security lock, but it's too heavy and bulky for my gravel rides.
Hey seth just got one of those pressure gauges and you can press the little circle button and once the number is flashing you can use the bleed button and it updates in real time. they say you should press the button after you bleed air for a precise reading.
can u do some summer hacks and a list of high end mtb please
Hey Seth, I have the Fidlock and wanted the One ⬆️ pump. I wasn’t sure the two would work together? I figured twisting off the bottle would hit the pump. Good to see this combo works. Great video 👍🏻
Hey seth when will you review that fat bike ? It looks legit
A cool hack I found is taking the crap grips that come standard with bikes and cutting them down the middle on one side. Then I zip tied them to my chainstay. Works perfect! Hardly and noise too!
6:45, love how Seth covers his ears about 4 secs after the pop
Hehe nice vid I love the jazz soundtracks you always use.
9:28 thats wrong. You have to push the upper button before than it will work
Oddly enough, I think I actually have an application for the Hiplock...wouldn't have thought of it had you not posted here. Thanks!
seth: **dies**
seth: did my water bottle stay on?
Probably already been stated but... FYI: if you hold down the "target" looking button on the Topeak Smart Gauge, the pressure indication blinks and then updates in real time. Been using mine for 5 years now, I love it.
seth: crashes
hey yo did my WaTeR BoTtLe StAy In?
jk seth im just messing with you