Modelling this one for 2021😁...very good tutorial 👍🏼👍🏼. Things from your channel I modelled successfully.. 1. Hotel Bathroom 2. Swimming pool 3. Halloween special video 4. New Year fireworks animation(added) 😀 Thanks again for the tutorials 😀
PS. Question cancelled, problem was in not applying scale. Thanks for a great tutorial. I will leave it below, just in case someone runs into the same problem: for some reason, my Inset and Bevel commands work differently and wrong: inset leaves thicker walls at the sides, proportionally to the shape of of the elongated cube (which I was able to correct afterwards, manually) and bevel tends to make very slight bevel on the horizontal parts and much bigger again on the vertical parts. is there some secret toggle to edit proportionally to the shape of the object ? (tried on 2.82a and 2.91a)
I made one of those sparkler things and tried importing it into another project but for some reason, the particles were going all over the place and going super fast. I even tried recreating it in the same project, but particles just seem to act weird in that project.
15:15 after adding keyframes it works but how to view the keyframes..I mean the yellow dots how to make it visible cause in my case I can't see them..but it works though
When you have selected the Light where you inserted the Keyframe the yellow dots should appear in the timeline, they might not visible for you because you have another object selected/active.
@@MagevoStudio hey can you guys please help I'm having the same problem? what do you mean select mesh, as in select mesh cube? also what are the exact dimensions for the cube? as i think that's were I'm going wrong, as it inverts correctly before shaping and scaling it to shape, your help would be greatly appreciated many thanks.
Okay, I give up. I cannot figure out how @ (1:01) you moved those vertices without taking the other ones along. The top of the first step's horizontal vertex is attached or shared with the bottom of the second step. So what I get is a ramp and not a step. I am not a total novice but still cannot duplicate your actions/steps. Any suggestions?
The most important is that after making the Loop Cuts (Ctrl+R) you extruded the faces Individually (right click and Extrude faces individually). Then in the Top view (numpad 7) I just moved the faces back on the Y a bit. Until having all of them accordingly to have some stairs. When you extrude them individually I guess it will work for you as well. Good luck!
hey, can you guys please help at 6.05 when I try to invert, it scales on the sides but not the top or bottom? what do you mean select mesh in object mode?I already thought the cube was a mesh? please help is a bit frustrating thnaks.
You need to apply the scale. So you have to be in Object mode and press Ctrl+a to do so. When you press tab on the keyboard you can change between Edit and Object mode. Edit mode is when you move the vertices, edges and faces. To move the entire mesh you go outside to Object mode pressing tab. So what you need to do in min 6:05. After appllying scale in Object mode, go into Edit mode, select the face selection, shortcut 3, then select the face and press i key for inset, while you move the mouse until you have the desired inset distance, to finish just left mouse click. Good luck & Merry Christmas!
As shown in the video you have to go to the Output tab and type in the name of your video, choose the file format and so on, go to minute 32:50 of the video to see it in detail. For the Camera you can move the view and then by pressing Ctrl+Alt+0 (zero) you can place the camera exactly at this position where your view is. You can also Lock the camera to view which means when you move and change the view the camera will move accordingly. To activate the camera lock, do the following: with the camera selected press N and a dialog on the top right will appear, now click on the Panel View and there you will see where it says View Lock and below it is: Lock Camera to View, click on the Check box to activate it. Hope this helps, good luck and happy New Year!
We wish you a Happy, Prosperous, and Funny New Year 2020!
Wish you a Happy, Prosperous, and Funny New Year 2023!
@@Porkupine69 Happy New Year!
Great toturial I'm going to use it to make a happy birthday animation
Cool idea!
Yes, i too. I do it for my Grandpa.
Same
i want to try this too for my cousin's b-day
@@Gerhardghg Same Here! Except for my Grandma which is in 15 days!
I followed your tutorial and made this fireworks with some differences, it looks great.
Thank for teaching the method.
🙏🏼🙏🏼🙏🏼
I'm preparing another New Year's Eve scene, if all works fine it will be available in about 7 hours. Thanks a lot!
Modelling this one for 2021😁...very good tutorial 👍🏼👍🏼. Things from your channel I modelled successfully..
1. Hotel Bathroom
2. Swimming pool
3. Halloween special video
4. New Year fireworks animation(added)
😀 Thanks again for the tutorials 😀
Glad to hear. Thank you!
@@MagevoStudio 👍🏼😊
Subscribed immediately. Awesome work mate.
Thanks a lot!
I just made one for 2023 and I'm seeing this now
Very good tutorial!
Thank u So Much For this Tutorials🙏✌✌
I already did a happy birthday from this tutorial
Cool, you can show us if you like...
@@MagevoStudio yes I'm Vishal studying in 5th grade
Great Tutorial
Thank you!
Grazie di cuore per i tutorial, Buon 2020 ricco di soddisfazioni e tanti nuovi tutorial
Grazie mille Antonio, buon anno!
PS. Question cancelled, problem was in not applying scale. Thanks for a great tutorial. I will leave it below, just in case someone runs into the same problem:
for some reason, my Inset and Bevel commands work differently and wrong:
inset leaves thicker walls at the sides, proportionally to the shape of of the elongated cube
(which I was able to correct afterwards, manually)
and bevel tends to make very slight bevel on the horizontal parts and much bigger again on the vertical parts.
is there some secret toggle to edit proportionally to the shape of the object ? (tried on 2.82a and 2.91a)
Same problem sir in insetting
Super ❤
So for the sounds, how do we get that? we just find some random fireworks sound we like and follow along? Else really good video!
Sure, maybe you find something decent out there. The sound used in the video is a paid one.
Good tutorial
Thank you!
Oh well, what a year ☠
WHY AM I NOT GETTING THE LIGHTING RIGHT!!! I'M FREAKING OUT!
Hey can u make some thing for Christmas too?
Will think about something to make...
I made one of those sparkler things and tried importing it into another project but for some reason, the particles were going all over the place and going super fast. I even tried recreating it in the same project, but particles just seem to act weird in that project.
Hello, the video is great. I liked it very much. There is a problem. The color of the balloons does not change. why?
Thanks, but I don't understand what you mean...
Nice vedio sir
Great work 👌👌 Do you have the link of the firework sound? I can't find any suitable and good firework sound to set on my blender animatiom.
Thanks. About the Fireworks sound, it is a paid one...
can u plz upload the project file here ??
did you have any plans to give this file to all of your viewers ?
Hai... Face insertion near the New Year name is not coming properly in blender 3.0. how can i solve.. Explain it..
When I try for partical the particals are going down side could you pls help me sir
sir create cricket sport animation transition..overlay..logo
Sir can i get this .blend file please..for personal use......
Help I can’t render it. It’s been on rendering page for 30min and nothing comes out. I’m using M1 with 16RAM
what is the music ?
What would happen if I set the fps in render settings to 60?
Please create a vedio on how to save vedio animation blender 2.8 please sir
it's video, not vedio...
1 years
15:15 after adding keyframes it works but how to view the keyframes..I mean the yellow dots how to make it visible cause in my case I can't see them..but it works though
When you have selected the Light where you inserted the Keyframe the yellow dots should appear in the timeline, they might not visible for you because you have another object selected/active.
Download link please?
At 6:07 after pressing "I" the face scales different for me.
Select the mesh in Object Mode, then press Ctrl+A and apply scale. Then the inset should work properly.
@@MagevoStudio hey can you guys please help I'm having the same problem? what do you mean select mesh, as in select mesh cube? also what are the exact dimensions for the cube? as i think that's were I'm going wrong, as it inverts correctly before shaping and scaling it to shape, your help would be greatly appreciated many thanks.
Okay, I give up. I cannot figure out how @ (1:01) you moved those vertices without taking the other ones along. The top of the first step's horizontal vertex is attached or shared with the bottom of the second step. So what I get is a ramp and not a step. I am not a total novice but still cannot duplicate your actions/steps. Any suggestions?
The most important is that after making the Loop Cuts (Ctrl+R) you extruded the faces Individually (right click and Extrude faces individually). Then in the Top view (numpad 7) I just moved the faces back on the Y a bit. Until having all of them accordingly to have some stairs. When you extrude them individually I guess it will work for you as well. Good luck!
@@MagevoStudio Thank you. I'll try to let you know how it goes.
This is great. Will you do one for 2021?
In about 60 min. it will be available... Happy New Year!
@@MagevoStudio Thanks! Happy New Year!
hey, can you guys please help at 6.05 when I try to invert, it scales on the sides but not the top or bottom? what do you mean select mesh in object mode?I already thought the cube was a mesh? please help is a bit frustrating thnaks.
You need to apply the scale. So you have to be in Object mode and press Ctrl+a to do so. When you press tab on the keyboard you can change between Edit and Object mode. Edit mode is when you move the vertices, edges and faces. To move the entire mesh you go outside to Object mode pressing tab. So what you need to do in min 6:05. After appllying scale in Object mode, go into Edit mode, select the face selection, shortcut 3, then select the face and press i key for inset, while you move the mouse until you have the desired inset distance, to finish just left mouse click. Good luck & Merry Christmas!
@@MagevoStudio thank you guys for taking the time out your busy Christmas to answer. merry Christmas.🎅🏻🎅🏻🎅🏻🎅🏻
25:52
At 7:10 I was not able to find the intro font on my PC. Its a lenovo 'Thinkpad' with windows 10. Pls help
www.fontmirror.com/intro it is the last of the 4...
@@MagevoStudio Thx but I found it just as u wrote this. Awesome tutorial BTW. U shld have 1mil subs.
@@banimator2005 Thanks a lot!
WHY DO PEOPLE PUT MUSIC ON THESE THINGS?????
Why do you care?! Just mute the video if you dont like it!
2020 nearly killed me 😢
That means that you will be save for the next decade... Keep going!
@@MagevoStudio maybe we will only be survived if this stupid corona is gone
@@MagevoStudio bro wat can we actually do with blender like fun things
@@cooldog6691 Almost everything I think...
at 11.00 song name anyone please
The song is called Nomads. Artist: The Mini Vandals. You will find it in the UA-cam Audio Library.
Sir please help on blender
How can I help you?
How to save animation videos and camera how to add on center
As shown in the video you have to go to the Output tab and type in the name of your video, choose the file format and so on, go to minute 32:50 of the video to see it in detail. For the Camera you can move the view and then by pressing Ctrl+Alt+0 (zero) you can place the camera exactly at this position where your view is. You can also Lock the camera to view which means when you move and change the view the camera will move accordingly. To activate the camera lock, do the following: with the camera selected press N and a dialog on the top right will appear, now click on the Panel View and there you will see where it says View Lock and below it is: Lock Camera to View, click on the Check box to activate it. Hope this helps, good luck and happy New Year!
Don't mind please give whatsapp no
Please make vedio on blender how to save vedio please please
I need some help sir
How can I help?
2020 is suck)))
2021 for sure will be better, patience and change will come very soon!
@@MagevoStudio I hope so))
Thik se sikhao