Hi, You can choose the capacitor yourself exactly according to the motor and input voltage. It is better to use polyester capacitor with high capacity and voltage to avoid damage to the capacitor. Good luck
Engineer, 18 nano Farad 200V capacitor cannot be found at all in online purchases in our country.. Can you introduce an alternative capacitor that exists..?
Hi, To create the PVC sheet, I used a PVC pipe with a diameter of 11 cm. Dimensions of the tool body: length 20cm, width 15cm, height 10cm, dimensions of the top of the tool, length 27cm, width 19cm You can make the top of the tool bigger or smaller according to the cutting dimensions. Good luck
Hi, The lifting part is made of PVC sheets with dimensions of 8×12(the lower part), 8×3 and 8×2.5 (middle part),8×8 (The rest of the episodes) Gearbox motor size:2.5×1.2×1 Good luck
Hi, It depends on the thickness of your PVC sheet, the part where the gearbox motor is placed should be about 2.5 cm thick, and the upper part depends on the bearing and shaft you choose. It's great to ask any questions you have. I will reply as soon as possible. Good luck
Hi You can buy all kinds of blades from the tool store in your city. Auniwaig 60mm HSS Circular Saw Blade, 72T High Speed Steel Cutting Disc, 0.3mm Thick Circular Cutting Wheel with 16mm Arbor, for Rotary Tools, Wood Plastic Metal Cutting a.co/d/04GPUo5I Good luck
Hi, The length of four of the 8-mil shafts is 9.5 cm and the intermediate shaft is about 12 cm, of course, it depends on the type of poly and your connections. Good luck
Hi, I didn't understand exactly what you mean, but if you mean the main shaft, which depends on the poly and the milling interface you choose, the length of the shaft of my tool is 12 cm and its diameter is 8 mm. Good luck
Engineer, what part is this, I did not understand it.. Motor starter capacitor
Hi,
You can choose the capacitor yourself exactly according to the motor and input voltage. It is better to use polyester capacitor with high capacity and voltage to avoid damage to the capacitor.
Good luck
@@MrPVC-tb1lt Is the same 100 nanofarad capacitor that you used in the project good?What is your suggestion?
Hi,
100 nanofarad lens capacitor for lift motor and 18 nanofarad 200V polyester capacitor for 775 motor
Good luck
Engineer, 18 nano Farad 200V capacitor cannot be found at all in online purchases in our country.. Can you introduce an alternative capacitor that exists..?
Hi,
There is a wide range of capacitors for this purpose, for example, you can use a 25V 2700 or 2200 microfarad electrolytic capacitor.
Good luck
Niiiiiiccc brooo
Size pvc broo?????
Hi,
To create the PVC sheet, I used a PVC pipe with a diameter of 11 cm.
Dimensions of the tool body: length 20cm, width 15cm, height 10cm,
dimensions of the top of the tool, length 27cm, width 19cm
You can make the top of the tool bigger or smaller according to the cutting dimensions.
Good luck
6:37 Brother, please tell me the size of the parts you made for the lifter and lower armature
Hi,
The lifting part is made of PVC sheets with dimensions of 8×12(the lower part), 8×3 and 8×2.5 (middle part),8×8 (The rest of the episodes)
Gearbox motor size:2.5×1.2×1
Good luck
Engineer, how many layers of each..? Sorry, I ask too many questions😅@@MrPVC-tb1lt
Hi,
It depends on the thickness of your PVC sheet, the part where the gearbox motor is placed should be about 2.5 cm thick, and the upper part depends on the bearing and shaft you choose.
It's great to ask any questions you have. I will reply as soon as possible.
Good luck
Many thanks to the engineer 🌹Engineer only from P. pipe What thickness of PVC did you use?
Hi,
The thickness of the pipe I used is 2.5mm
Good luck
Can you please provide the dimensions.
Hi
Body dimensions of the table saw: length 20 cm, width 15 cm, height 9.5 cm, and the dimensions of the top of the tool are 19 x 27 cm.
Good luck
Blade wrong side running 😅
Hi,
The blade must rotate towards the person to feed the scrap pieces into the lower chamber.
Good luck
इस कटिंग मशीन का ब्लेड कहां मिलेगा
Hi
You can buy all kinds of blades from the tool store in your city.
Auniwaig 60mm HSS Circular Saw Blade, 72T High Speed Steel Cutting Disc, 0.3mm Thick Circular Cutting Wheel with 16mm Arbor, for Rotary Tools, Wood Plastic Metal Cutting a.co/d/04GPUo5I
Good luck
What is the length of an 8-mil shaft?
Hi,
The length of four of the 8-mil shafts is 9.5 cm and the intermediate shaft is about 12 cm, of course, it depends on the type of poly and your connections.
Good luck
Hi, good evening, I'm Gilson from Brazil and I started following your channel, you could also make a mini lathe. Your UA-cam channel is very good.
Hi Gilson
Thank you for watching and also thanks for subscribe to my channel
i try to build in subsequent projects.
Good luck
Hi engineer Do not be tired It can be the length and diameter of the shaft used for the logo Say the elevator n20 ??
Hi,
I didn't understand exactly what you mean, but if you mean the main shaft, which depends on the poly and the milling interface you choose, the length of the shaft of my tool is 12 cm and its diameter is 8 mm.
Good luck
Excuse me, engineer, can you tell me what size screws you used?
Hi,
Bolts and nuts with a diameter of 5 mm and a length of 3 cm and an automatic screw with a diameter of 3 mm and a length of 2 cm
Good luck
nice bro
Awnings to you❤
♥️thanks