Thanks for info. Welds on rad looks quality work. Hopefully you are recharged. Remember that a lot of us appreciate quality work and professional pride in the work you do. From retired hvy fleet mechanic.
Just got one of their radiators for my 2000 Tundra 4.7. Outstanding radiator. Solid welds and construction. No reason to buy a plastic tank radiator when you can get one of these. Ordered to arrival less than a week.
I used a koyorad replacement radiator instead of the mishimoto brand on my 2006 subaru sti.very satisfied with the quality. Only complaint is koyorad does not make radiater silicone hoses
Bought a champion two row for my 383 powered Cordoba non A/C seems to work well even in the summer heat of NJ.....looking at this one you put in I'm thinking of upgrading my 74 charger with one thanks for your review.
Hey Joe where did you get the one wire 140 amp alternator I have used them before on many older cars and yes I think there the only way to go thanks again Joe
Hey joe great video, i have a question, what do u reccomend for a dvom for someone to use on vehicles as far as testing sensors etc.. i wanna get a good one not a piece of junk. I wanna get the fluke 88v with the kit but i just dont have the 300 or 400 bucks to spend right now. And should i get auto ranging or manual? Thanks joe! Love the channel brother!
@@JoesAutoElectric ok done deal im just gonna pull the trigger on one. Thanks joe! Yeah a fluke is hard to beat. I got and 09 vibe 2.4 l4 awd that has a intermittent circuit high and a circuit low code for the throttle position sensor im trying to get figured out
I respect your expertise and advice but my personal view is that I'm going to look harder and pay more for stuff not made in China. As far as I'm concerned they need to pay for their virus.
I see it a bit different. The people making these parts have zero to do with the virus. And truth be told, maybe look in our own backyard about that first.
@@leocarvajal6967 The problem with that logic is that the hard working people that make them are treated like slaves by factory owners, paid a pittance with the Lion's share going to factory owners. Factory owners are inevitably mostly CCP members because its very difficult to navigate the arbitrary bureaucracy there unless you are. So, by sending any money to China via any route, you're still proping up the existing totalitarian regime.
@@JoesAutoElectric Exactly our backyard needs a massive renovation. It`s the taxes that hinder our growth and destroy job creation. Governments role is to not drive jobs away but to allow an environment to compete with the global economy not to chain corporations (corps don`t pay taxes) with taxes that ultimately we pay as citizens. US Politicians drove away jobs and jacked up our debt / unemployment and all we can afford to survive after our extortion ( Irs ) brigade is cheaper goods from Us based ( ironic )companies moved overseas for lower taxes to give more revenue to the stock holders investing in those said companies. Thus the never ending Merry go round of inflation / taxation we pay . And people keep putting in the same idiots who are too dumb to see the endgame of class warfare and social programs created out of thin air to take care of not the personal responsibility of honest hardworking American but the irresponsible American`t. *If i didn`t bake the cake why the Hell am i paying for the ingredients ?* As the once great Prez Reagan said > Government isn`t the solution, Govt is the problem..... USA Independence = Made In The USA With US Citizen Owned Companies and Labor.
Glad to see you back after your deserved rant break.
It's good to hear that the company came though for you. It looks good in that car.
Thanks for info. Welds on rad looks quality work. Hopefully you are recharged. Remember that a lot of us appreciate quality work and professional pride in the work you do. From retired hvy fleet mechanic.
Classic Muscle cars are always a head-turner.
Good to see ya Joe...
Just got one of their radiators for my 2000 Tundra 4.7. Outstanding radiator. Solid welds and construction. No reason to buy a plastic tank radiator when you can get one of these. Ordered to arrival less than a week.
how has it held up?
Hi man! I'm glad to see another good mech.tech. puffing around. Time for a Winston relax for me now. Bye.
awesome upgrade glad to see you are back.
I used a koyorad replacement radiator instead of the mishimoto brand on my 2006 subaru sti.very satisfied with the quality. Only complaint is koyorad does not make radiater silicone hoses
That's one nice Ride there Mr Joe!!! Nice work!!
That's a nice looking rad! Nice 4 core, you could probably not even have a fan going down the highway!
Looking Good Joe
Bought a champion two row for my 383 powered Cordoba non A/C seems to work well even in the summer heat of NJ.....looking at this one you put in I'm thinking of upgrading my 74 charger with one thanks for your review.
Good stuff
Hey Joe where did you get the one wire 140 amp alternator I have used them before on many older cars and yes I think there the only way to go thanks again Joe
Let us know what if any, sources you have Made in Merica
Tı her biji braye eziz destete sağbe sılav u rez
where is the sensor that turns that fan on and off, but great work again
hi joe hope you did ok in that crazy storm so many trees down here on long island just got power back
Luckily yes, we are ok.
stay safe all...
Nice !
Thank you! Cheers!
Yeah buddy from
Hey Joe. Just found this video thinking of putting one in a 68 chevelle. You have any cons to the radiator yet?
Hey joe great video, i have a question, what do u reccomend for a dvom for someone to use on vehicles as far as testing sensors etc.. i wanna get a good one not a piece of junk. I wanna get the fluke 88v with the kit but i just dont have the 300 or 400 bucks to spend right now. And should i get auto ranging or manual? Thanks joe! Love the channel brother!
Honestly, a fluke 87 88 are the ones I would recommend. They are so worth the money.
@@JoesAutoElectric ok done deal im just gonna pull the trigger on one. Thanks joe! Yeah a fluke is hard to beat. I got and 09 vibe 2.4 l4 awd that has a intermittent circuit high and a circuit low code for the throttle position sensor im trying to get figured out
Not sure if my problem is the pedal position sensor pedal aasembly in the car or part of the throttle body. at idle it is reading 13%
Did you run a separate transmission cooler ? I can’t find transmission line threads to fit it
It's a stick
What’s up joe
👍
Why is the overflow connection on the wrong side? Is this a universal radiator?
Actually it's the same as the one that came out
Joe's Auto Electric, Hmmm...interesting. It seems the one that came out was not the correct one either.
Like every thing in this world you get what you pay for, With China parts the more you pay the better quality parts you get.
prices on these are quite reasonable and the quality is very good. Thanks for watching.
Sold out for my car, made in China 🇨🇳 it says
Yes, they are made in China, but they are good quality from the experience I have with them.
Unfortunately everything is China. Its just a matter of finding the better China stuff.
Oooo a China lecture lmfao good luck
I respect your expertise and advice but my personal view is that I'm going to look harder and pay more for stuff not made in China.
As far as I'm concerned they need to pay for their virus.
I see it a bit different. The people making these parts have zero to do with the virus. And truth be told, maybe look in our own backyard about that first.
Buddy think for a second : the hard working personnel is not to blame. China government IS to blame..
@@leocarvajal6967 The problem with that logic is that the hard working people that make them are treated like slaves by factory owners, paid a pittance with the Lion's share going to factory owners. Factory owners are inevitably mostly CCP members because its very difficult to navigate the arbitrary bureaucracy there unless you are. So, by sending any money to China via any route, you're still proping up the existing totalitarian regime.
@@JoesAutoElectric Exactly our backyard needs a massive renovation. It`s the taxes that hinder our growth and destroy job creation. Governments role is to not drive jobs away but to allow an environment to compete with the global economy not to chain corporations (corps don`t pay taxes) with taxes that ultimately we pay as citizens. US Politicians drove away jobs and jacked up our debt / unemployment and all we can afford to survive after our extortion ( Irs ) brigade is cheaper goods from Us based ( ironic )companies moved overseas for lower taxes to give more revenue to the stock holders investing in those said companies. Thus the never ending Merry go round of inflation / taxation we pay . And people keep putting in the same idiots who are too dumb to see the endgame of class warfare and social programs created out of thin air to take care of not the personal responsibility of honest hardworking American but the irresponsible American`t. *If i didn`t bake the cake why the Hell am i paying for the ingredients ?*
As the once great Prez Reagan said > Government isn`t the solution, Govt is the problem.....
USA Independence = Made In The USA With US Citizen Owned Companies and Labor.