STIHL MS 251 Wood Boss® Chainsaw Review... What a beast!!
Вставка
- Опубліковано 20 кві 2022
- Doing a first look review of the STIHL MS 251 Wood Boss® Chainsaw
Brand:
Stihl
Product Link:
www.stihl.com.au
STIHL MS 251 Wood Boss® Chainsaw:
www.stihl.com.au/STIHL-Produc...
Store Purchase:
www.taylorsmowers.com.au/raym...
Editing:
Adam Tumes
Chainsaw
Farm equipment
Farm tools
Farming techniques
Woodcutting
Forestry
Farm maintenance
Rural living
Landscaping
Tree trimming
Safety tips
DIY farm projects
Sustainable farming
Agriculture
Gardening
Homesteading
Timber harvesting
Farm machinery
Farm animals
Harvesting crops.
STIHL File Systems - 2-in-1 File
MSE 141 C (Skin only)
MSE 170 C-B (Skin only)
Stihl MSA 120 C-B (Skin only)
Stihl MSA 160 C-B (Skin only)
Stihl MSA 140 C-B (Skin only)
Stihl MSA 120 C-B (Kit)
Stihl MSA 200 C-B (Skin only)
Stihl MSA 220 C-B (Skin only)
Stihl MSA 140 C-B (Kit)
Stihl MS 170
Stihl MS 180
Stihl MS 171
Stihl MS 181
Stihl MS 181 C-BE
Stihl MS 211
Stihl MS 211 C-BE
Stihl MS 231
Stihl MS 251
Stihl MS 231 C-BE
Stihl MS 251 C-BE
Stihl MS 271
Stihl MS 291
Stihl MS 291 C-Be
Stihl MS 311 FarmBoss
Stihl MS 391 FarmBoss
Stihl MSA 161 T (Skin only)
Stihl MS 193 T
Stihl MS 150 TC-E
Stihl MS 151 TC-E
Stihl MS 201 TC-M
Stihl MS 261 C-M
Stihl MS 362 C-M
Stihl MS 462 C-M
Stihl MS 500i
Stihl MS 661 C-M
Stihl MS 800 Magnum
Stihl HT 56 C-E (Skin only)
Stihl HTE 60 (Skin only)
Stihl HTA 85 (Skin only)
Stihl HT 103 (Skin only)
Stihl HT 133 (Skin only) - Навчання та стиль
Very thorough overview 👏🏻👏🏻👏🏻. Thanks for sharing 👍🏻
No problem, glad you liked it
One quirk I've discovered with the chain tightener, is that tension tends to change once the chain starts moving a bit. It's true that the teeth should not be able to escape from the bar, but unless you pull the chain around a couple times, the tension you're checking might be off. I think yours got tighter after you pulled it. Probably something to do with the sprocket. My rule of thumb is to make it as tight as I can while still being able to run it easily by hand.
Yep, the sprocket needs replacing.
Thanks, very helpful vid ✅✅
Glad you enjoyed it
thanks share this video
Glad you liked it
I need one!
They can be bought at all good hardware stores
For some reason, I have never gotten along with 45 cc saws. The MS 250 and 251 both give me problems getting them started. I got my MS 251 out of storage over the weekend and could not get it going. Pulling it over was like pulling an MS 880 without a deco valve. I thought it might be me but a younger friend could not get it started, either and he complained about the compression, too. I had run the 251 out of gas last fall and had not used it since last fall. I have not heard it make a whimper, since, so I checked it for spark and it has good spark. I also replaced the fuel filter and spark plug. All of my other saws came out of storage condition fine. I ended up doing some cutting with my ms 241 CM.
Take it to your dealer for a service so you can get it working again, you won't be disappointed
@@gunnadoofarm5109 it is running, now. It had what I refer to as ring lock or cylinder lock. Oil in a cylinder over time will solidify around the rings and increase compression so much you cannot pull it over. Get it running and the oil will burn off and problem evaporates. I got it running, yesterday and it is cranking like it used to. Red Armor leaves more oil in the engine than other two cycle oils, Like Stihl Ultra. Ultra used to puke oil all out the muffler, instead of leaving it in the engine where it belongs. Red Armor does not do that. Next fall,I may put the saw to bed with Moto Mix. My 181 CBE had the same problem after being in storage condition for seven months but it’s Easy Start feature overcame the problem. It was still harder to pull over than normal or now, after I got it running and did some cutting with it.
@@johnclarke6647 thats awesome l, glad you got it up and running, I am not aware of red armour, I only use stihl oil
@@gunnadoofarm5109 I can understand that. I ran Stihl Ultra for years until it completely blocked the spark arrestor on my ms 241 C-M. I had no problem with it until then. However Ultra is filthy oil. Red Armor is so much cleaner. I don’t care about the smoke part of it. I just want good lubrication and a clean saw.
@@johnclarke6647 I use Aspen 2 fuel with mine, costs a bit but I've never had issues bringing it out of storage. Muffler looks pretty clean too. Maybe something to try I guess, if it's available where you are.
Novice saw user here. Seems like the saw dust was rather “dusty,” vice chips. Could the rakers need to be filed down a bit more? Seemed that the chain wasn’t “biting” into the wood very well.
Yep, you are right
Good ta see a Stringybark cut demo instead of all these pine/birch cuts...
Thanks Erica cat, there are alot of videos from america and Europe showing it slicing through soft woods, not many showing hard wood cutting
ive got a 250 and it has done its job.but then again i fix them
They are a great middle ground saw
Should we Tighten the chain after it gets loose Running minute or Two due to Heat? Or let it run loose
let it run loose after it heats up, otherwise you will wear out your sprocket on the end of the bar
I've had mine for almost a month. I've ran at least 8+ tanks at this point. No complaints. Easy too start and maintain. I have somehow worn down The bar a bit right before the tip. I think I had it too tight for the first tank or 2?
Do you rotate your bar? Should look at rotating the bar every time you sharpen the chain.
I like the 025 and 250 better than the 251. These are good little saws. It has a clamshell engine. Who cares, it will cut all day for about $200 less than the "pro" 261.
Can't say I have used either of those models, but the 251 is great for me and cutting firewood
Are you sure that's a 251. I have a 250 and 261 that saw looks more like my 261 with top cover, air filter and such. I cannot see closer on my phone
My bad, I didn't realize all the changes between the 250c which I have and the 251. It appears that the 251 is a cheaper version of the 261 which I also have. I have spent a lot of time lasteky with my 250c. It is pretty much at it's likit when cutting 18"-20" ash of which I have quite a few dead right now. The 261 chews right through these but my 250 had to work a bit harder. When cutting limbs or such that is say 8-10" it chews right through these
Yeah it is a 251, I havent used a 250 before but I assume it is similar to the 261 with a little less performance
@@gunnadoofarm5109 261 is a totally different chainsaw! Is a pro level saw with magnesium housing and other pro features! Only similarity with the 251 is the brand and the color! Nice video but your chain is not cutting and also you tighten the chain too much! You mention that your sprocket need replacement🤔 sprockets last for thousands or working hours not only 20 😅