Mercedes W164 ML320 parktronic inoperative. Fault finding and repair.

Поділитися
Вставка
  • Опубліковано 26 сер 2024
  • Consider to support my channel and all the hard work put into it at / lmautorepairs
    Thank you
    Hi
    Another issue this ML320 CDI came with, was the parking sensors system or parktronic not working...
    A quick scan showed a fault with one of the rear sensors, fault xxx.
    A couple more tests, just to ensure the wire integrity, and quickly the problem was found...
    Follow me on this video to find out what was the problem and how to resolve it.
    Hope you enjoy the video.
    Any questions or comments put them below.
    Like always, thank you for watching!

КОМЕНТАРІ • 38

  • @beluxauto5968
    @beluxauto5968 3 роки тому +2

    I´ve had some bad luck with 3rd party sensors but that´s another story . The one your client bought did the job and that´s what matters. Good morning to you Luis and have a nice sleep or day .

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      😊
      I don't like 3rd party sensors either...
      Working days today...😋
      Thanks!

  • @SalimKhan-gk1fh
    @SalimKhan-gk1fh 3 роки тому +1

    Excellent video as always Luis thank you for sharing with us ,some of the third-party sensors a bad and some of the £15 eBay ones are actually very good! It’s nice to know you can get live data for the distance readings

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому

      👍👍👍
      Thanks, for watching and for your comment!

  • @cuthburtyes9529
    @cuthburtyes9529 3 роки тому +1

    Hi Mr L thanks a lot we are learning a lot from you sir God bless

  • @rikeshparmar716
    @rikeshparmar716 2 роки тому +2

    How did you remove and refit the sensor without taking the bumper off. I have faulty sensor on rear driver side corner.

    • @LMAutoRepairs
      @LMAutoRepairs  2 роки тому

      From the underside... it is tricky, but "duable"...
      👍👍👍

  • @mrgrumpy5116
    @mrgrumpy5116 3 роки тому +1

    still following enjoy your vids thanks.

  • @Ianf1x
    @Ianf1x 3 роки тому +2

    Thank for vid what is the soft were you are using on laptop please. I use wow / delphi with snooper.

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +2

      This is the Xentry/DAS...
      I don't have that tool... my main tool it the MS908P...
      Thank you for watching!

  • @awuk3468
    @awuk3468 3 роки тому +2

    Great video, I think you need a new phone case!

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      🤣🤣🤣🤣
      Indeed...
      Only use this phone for the videos... so doesn't bother me too much...
      👍👍👍

  • @renardasg4064
    @renardasg4064 Рік тому +1

    6 sensors 255 ?any 💡

  • @rabnawazkhan1837
    @rabnawazkhan1837 3 роки тому +1

    Great video mate, very informative. Been watching all your videos, I have an issue with my 2008 e class, if ac compressor's plug connected it drains battery any way to test why could it be climate control waking car up?. Thanks

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      Hi
      Start by scanning the car, look at some like data and go from there...
      I would ask something else... why and how is the car triggering the compressor with the engine off?...
      Hope you find the issue...
      Thank you for watching and for your comment!

  • @hashirnawaz4532
    @hashirnawaz4532 3 роки тому +1

    Good morning sir are you ok
    Nice video

  • @steliofrasco3455
    @steliofrasco3455 Рік тому +1

    I wanted to see how you actually take it out and put it in without removing the bumper

  • @Smudger96
    @Smudger96 2 роки тому +1

    I have scanned my car and it tells me that the 2 rear outer sensors are faulty. Will 2 faulty rear sensors also be the cause of the front ones nor working.
    I'm just getting a beep and the red lights on the front and bank led light things associated with the parking sensors

    • @LMAutoRepairs
      @LMAutoRepairs  2 роки тому

      Yes...
      The entire system shuts off if one or more sensors stop working...
      👍👍👍

    • @stevesullivan9377
      @stevesullivan9377 5 місяців тому +1

      Don’t know if I’m too late, but I had this exact fault. Had to switch the parking sensors off, they’d just beep and I’d get red lights on the rear and front distance indicators. I removed the rear bumper looking for a water leak and there was massive build up of crud around the 2 outer sensors. Cleaned the crud away and they worked fine . They’ve never worked as long as I’ve had the car (3.5 years).

  • @upkarbath
    @upkarbath 3 роки тому +1

    Where did you buy Xentry ? Thanks for sharing

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      🤔
      Can't remember now... bought it about 4 years ago... but I believe was eBay...
      Thank you for watching!

  • @antonypalierne4983
    @antonypalierne4983 3 роки тому +2

    👍👍👍

  • @patelvivek4888
    @patelvivek4888 3 роки тому +1

    👍👍

  • @unclealbert294
    @unclealbert294 11 місяців тому +1

    I cant get my arm in sadly so I'll have to remove the bumper😢

  • @hypersomrizz
    @hypersomrizz 3 роки тому +1

    👍🏾👍🏾

  • @hossjlr4891
    @hossjlr4891 3 роки тому +1

    Hi does anyone know what’s the difference between “third party sensor” and second party or first party sensor !!?? 🤔 just kidding 😂😂

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      🤣🤣🤣🤣
      1 position place difference...
      😋
      👍👍👍

  • @pauloneill8912
    @pauloneill8912 3 роки тому +2

    shouldn't have painted it, stands out like a sore thumb

    • @LMAutoRepairs
      @LMAutoRepairs  3 роки тому +1

      😊
      A bit of dirt and will look the same as the other ones...😋
      Thank you for watching and for your comment!

  • @junlu5182
    @junlu5182 3 роки тому +1

    Hi there, this is Liz from MXR, a brand of rebuilding and car parts. Are you interested in any UA-cam business collaborations?