Just Put Super Glue on the Led Bulb and you will be amazed
Вставка
- Опубліковано 21 лют 2023
- Just put super glue and baking soda on the led bulb and you will be amazed by how it fixes the dead led bulb and brings it back to life! You can easily try this simple repair tricks at home no tools or soldering welding required.
I hope you enjoy this video of How to DISASSEMBLE and REPAIR an LED lamp WITHOUT A SOLDERING IRON DIY LED lamp repair
My Another video⬇️
Just Put Aluminum Foil on the Led Bulb and you will be amazed.
• Just Put Aluminum Foil...
🔴This is just for experiment purposes do not try at home thank you…
Inventor 101 #superglue #ledlights #repair - Навчання та стиль
Me, a man with a soldering gun, watching someone sharpen a pencil to obtain graphite to mix with baking soda and super glue to add a conductive link to a circuit: 🧐
Sometimes it's just good to have the backup knowledge 😅 no one catching this dude with his pants down 😂
@@Katie16682 for sure lol
Maybe it add some resistence
Yeah this could provide resistance compared to solder so the other light's don't have to carry the load.
Why do u say just put glue.. JUST ????
That's 3 minutes of my life I can't get back...Thanks
You obviously don't get the video. They're showing you how to fix a burnt out led bulb.
@@crashnburn9383 it's quicker and easier to just go buy a new one
@@crashnburn9383 I was expecting to be amazed by the super glue on the bulb. But all I found was a guy showing me what to do if I was stranded on a remote island and my LED light buld was out and all I had on me was super glue, a pencil, sandpaper, baking soda and a flat tip screwdriver.
@@benjaminhurtt880 haha what? I'll race you, sorry no way.
@@thenicksears It's literally a dollar. Your effort is worth more than a dollar. Getting the graphite shavings from the pencil is gonna take me longer than buying a $4 4pack of led bulbs.
The guy (after using graphite instead of a soldering iron): You know, I'm something of a scientist myself
Them: Create a conductive composite graphite-cyanoacrylate material to replace the failed surface mount light emitting diode.
Llll lllllllllllllllllllll LLC is ok llll is
@@ChrisD__ po 99oo
@@ChrisD__llllk
"Solder Companies Hate This 1 Weird Trick That Saved Me $$$$$"
This guys a genius. I've been using ramen noodles for electrical circuits but they lose conductivity when they dry out. This is revolutionary.
That's why you take the seasoning packets and build a water noodle pump.
@@tirkentube 😂
Stoooopid!😂
Best comment i have read all day.
You guys crack me up .
Instead of graphite, you could also use the metal from the johnson rock that you can obtain from the top of Mt. Everest after fighting yetis and sacrificing 5 human male boys.
Lol
Tooo good XD
Does it have to be a full five? What if I threw in two girls and a wooly mammoth? 🦣
I laughed way too hard at this.
I was thinking maybe break in the Louvre and take a gear cog tooth from the antikythera mechanism.. trust me don't upset a yeti.. it'll make Deliverance or a Turkish prison seem like vacation
That $4 bulb got way more attention than it deserved..
4 dollars? They are 89cents a piece in bulk. Or for the knockoff onee that work just as well. Lol
Exactly just change it out
@@wakenow7612 89 cents? I get 6 packs at Costco for 99 cents after instant rebate from the energy company.
@Michael Ferguson exactly what I was thinking just swap it out
Thanks, I stopped the video dueing commercial and won't watch it thanks to your comment.
If only the thumb down counter still exists...
*From other similar videos* - can use foil and tape instead.
- lifespan is short, because the current flow through the other LEDs is increased.
- better options noted are a diode, LED or resistor to match the current flow.
- best option presented is to use 1 bulb as a parts donor, remove LEDs with soldering iron or heat gun, and use in later bulbs that fail, here 1 donor bulb with 15 LEDs could repair 14 other bulbs, mark the side to match (clockwise or counterclockwise) because you have to maintain polarity.
Is there a typical resistance found in these LED diodes; what is the DC voltage typically fed to these diodes? Thank you for your timely comment.
@@Anonymous-zv9hk LEDs don't have a linear relationship between current and voltage. A quick Google search for "LED bulb internal wiring schematic" shows the LEDs in series, placed in parallel to a Zener diode, providing a constant voltage to the LEDs in series. You could measure across the failed LED to determine the Zener voltage, but you wouldn't know the design LED current and equivalent resistance because they vary.
Unless you have the LED part number and can locate a data sheet, you would need to either take apart a good bulb, or temporarily connect an LED from a failed donor parts bulb, to measure the normal (all LEDs working) current and voltage drop, to know what size resistor to use.
Same thinking here. Bc I thought surely he was going to show how the many could be repaired using only the one.
exactly what i do . i keep all my old led bulbs as spares . there easily changed with hot air station . i guess this method in the video does work if your in a pinch , the same applies to backlights on Led tv,s .
Best option is to spend 75 cents on a new bulb and recycle the old one
Bro chopping up lines with the soda like he's done this before. 🤣
he is " out of his nut "
I thought the same 😅
Right? I thought for a second: "is he gonna snort it?"
Ong i saw your comment and died laughing. I was reading comments to see if i missed something, like what happened that made him do all this. I know im just a female but i get in a bix grab a new one. It alot faster than all that.
Seems like a lot of work to fix a $3 bulb, but I get your point. Just showing you can fix if needed.
People commenting that it's better to replace with a $3 , forget that this is viewed also in countries where a $3 is quite a lot of money to spend than repairing. I am in South Africa and I definitely will repair instead of replacing.
But also I wouldn't completely trust this safety wise.
@@adolphdube3763 I definitely agree
@@ClintByrne it's perfectly safe. There's a transistor in the base that downgrades the power to 2w to 18w. The full current isn't passing through the graphite in the pencil. But all you have to do is trace around the blown out light with a pencil to complete the circuit.
@@adolphdube3763 yep, I got one at home that just stopped working...definitely gonna try this when I have some time.
Can't say I was amazed. I was expecting something amazing if you applied super glue to the actual bulb like the picture implied.
Same here. I feel like i got robbed.
What were you expecting? A golden pigeon coming out of the led bulb? 😂
Just ordinary click baite
Yup, same thought!😂
Viewers are less likely to click on a video titled "Using graphite to bridge a burnt out LED circuit"
Wow! He invented a lightbulb using only a lightbulb and some other stuff! Amazing!
Your comment is hilarious and makes no sense at all! 😂 "He invented a 'lightbulb' using only a 'lightbulb' and some other stuff. 🤣 I invented a 'car' using only a car, gasoline, and a steering wheel! Thomas Edison invented the lightbulb. What you witnessed was a man fixing a broken electrical circuit using graphite, baking soda, and superglue.
@@bdallas527 Edison invented nothing. He just stole everything and put a sticker on it saying "I invented this thing". Delightfully devilish Edison
@@bdallas527 Fuckin boomers, man
🤣🤣🤣🤣😂
Hilarious 🤣😆🤣😂
Really, really good response😂🤣
How to create an electrical fire Hazzard 101.
The resistance and the size of path you create with the graphite is pretty unpredictable.
That's my concern
I was thinking the same thing. You just effectively removed a resistor from the circuit, putting more current to the other LEDs (assuming the graphite is a good enough conductor to be approaching 0Ω) and without more information about the rest of the circuit and those LEDs load, he may have just turned all of them into a ticking timebomb of heat. At the very least he's going to accelerate the demise of the remaining LED's.
@@dwatts64 no bio
@@dwatts64 Well said sir. 👏
That’s what I said. Those contacts act as circuit breakers in case of overheating. Now it’ll continue to get hotter until there’s a fire! Someone wasn’t paying attention in class on this subject.
Instructions unclear. House on fire.
Look on you tube there's bound to be instructions on making a shitty fire extinguisher that won't work.
@@lifesagamesobeawinner 👍🤣
😆💀
Instructions unclear. Ingested pencil.
Lol
Thanks, I've been wondering what to do with my extra pencil graphite. 🤪
🤣
28
@@paulmortensen6147 #2
Buy another light bulb.....duh
I had a flat tire on my car. Figuring I was screwed without a spare, I then recalled this amazing video. I mixed super glue and baking soda and attached a light bulb to each lug nut. It worked as well as this amazing video solution
Learn something new every day!
😂
I did that too!
@@joeyjamison5772 This youtube video has created an entire industry of do it yourselfers!
I learned the word lug nut. Thanks.
I’m sure a lot of people would share my sentiments and say that I’ll just buy another bulb and use my time more efficiently
So you watching this video and commenting on it is part of your efficient time use?
@@DROSTraceurADD yes
@@drose91 just like me replying to you 🤣🤣🤣
Where is the fun in that!
@@drose91I'll be billing the man behind it for my time
Wouldn’t a tiny bit of solder work as well?
Yup
With all respect to the original poster, I was thinking a blob of solder would do twice the job in a quarter of the time
Just trying to be more creative if you dont have soldering
The title is always misleading. This is McGyver of UA-cam. I pray I never have to use this.
@Dimples There should be a 'lol' button, or opportunity to put an emoji.
This is awesome, thanks for posting!! Everyone knows it's next to impossible to find replacement LED bulbs these days. It's totally worth doing. If you don't have any superglue, just buy some... it's usually found near the light bulb section of your favorite store.
Hi mate. You may know the answer to my question. Is the cheaper supa glue which you get in the dollar stores, ok to use for all these fabulous hacks? Or do you have to buy the really more expensive one (ie: Supaglue’ brand) ?
@@NudePostingConspiracyTheories You need the one that's used for sniffing.
At my local Walmart, the glues and tapes are found in the paint dept.
Don’t listen to this guy ^^^
You could test another dead bulb, take a working led off of that bulb and solder it on to this one. Because if you keep taking leds off of this bulb and bridging the contacts where it used to be what you will find is the rest of the leds will start burning out faster and faster the more you do this because the the amount of current will increase each time you remove an led and do this.
I see a fire in their future.
Exactly , this is what I think too. Taking one led out of a circuit will increase the overall electric power for the rest of LEDs. from Poland 😀
That's why he used graphite instead of solder. DUH!
That seems like the best idea . I'll keep dead led globes from now on , thankyou .
1 hour later he saved a $1 bulb amazing
While only spending a mere $4 in supplies /s
Most folks have that stuff laying around. Burn your fossil fuels just to go to a store to buy a bulb is a WAYY more efficient use of energy.
Most of those are actually around $5 a piece depending on the watts and amps.
Yea, but if the economy or society ever got the fan this is very useful if there is no shipping infrastructure to send you a new bulb
@@lijh u have to use fossil fuels to go to a store anyway for groceries etc , so who cares ?
Make sure to use uninsulated tweezers and test the socket first
A soldering iron would have fixed it in 2 seconds!
💀
Jajajja
Right! With those you can basically feel which diode hast failed...
Or you just use a regular multimeter and continue living.
For real. Could of just used insulated plyers
This is such a fire hazard 💀
Is it really? Explanation please?
@@gnarmarmilla The higher electrical resistance of the graphite/clay/baking soda/super glue mixture will create heat, which can melt and combust the plastic.
My thoughts exactly!
@@-VolkoslaV- Funny thing, if it was soldered the resistance would be too low and the light would soon burn out completely, especially if it was a cheep bulb. Also each of those LED's are running on 8v of power. So the chance of fire is practically non-existent. I would even argue the lit LED's are most likely throwing more heat then that bridge.
I personally for years have used construction pencils for lubrication on many of my tool because the abrasive dust I create stick to oil and grease lubricants causing more damage then using nothing. And quite a few time I have used them just like in the video to quick fix LED lights out on the job sites. Because it saves time rather than driving to a store somewhere in a town you don't know just to find they don't sell high powered lights. To date I own 3 light that have been repaired in similar fashion and they are at least 4-5 years old by now.
Seems like a little more than just superglue but I could be wrong LOL.
Bahahaha
shush , I think your onto something
Yes I tried this and now I look like Doc from back to the future. ⚡️
flux capacitor.
I had to type it.
sorry , I 🇬🇧
Nobody noticed that the burnt LEDs have a different (lighter) color?
This video is effective at teaching people to put tweezers into a live circuit running through the mains.
@@alifarhankhan1 Light bulbs run on mains power. Yes, the LEDs are relatively low voltage, but the circuitry to convert mains AC to the voltage for the LEDs is quite dangerous if you don't know what you're doing.
@@NORMIES_GET_OUT yeah, the circuit doesn't care if the LED only needs a little, if it finds a way to earth it'll send as much as it can that way, through anyone holding those tweezers
They stopped the video before the house burnt down?
I've been drinking bottles of Windex for years to prevent me from streaking but this is revolutionary!!
🤣🤣🤣🤣🤣
Two questions Tim, did the Windex prevent COVID? 😂 And, did your urine turn blue or green? Just curious,👽
@@davidwillis3913 it helped me to see clearly that that I had Smurf piss and nope on the COVID.
Making the world a better place with super glue and baking soda one day at a time
Before I clap my hands he has to show me first how to reattach and reseal the bulb cover which is the more difficult part.
That's what I was thinking. He cut that sucker
It ain't going to go back on so easy
Superglue, of course. Superglue and baking soda.
Or, you could buy a new light bulb, lol. They last quite a long time usually, so replacing it wouldn't be an extravagance. (The LED bulbs on my front porch burn between 8 and 12 hours a night depending on the time of year, and have been doing so for 5 years without replacement, so far.)
Wait what? They burn out every 8 to 12 hours Lmao? U had to have made a typo in ur comment cuz it doesn’t make any sense at all (what u said about ur front porch lights lol)…
The comments on this wall tho 🤣 too funny..
I tell you🤣🤣🤣🙌
Used to use pencil lead tracings to bypass BIOS locks on Enterprise edition Dell laptops. Worked a treat!
I couldn’t help myself, but I snorted that pencil lead and baking soda mixture!😳
Way way way over kill
If don't insulate the tweezers and do this while sitting in a full bathtub it's really neat.
Keep the broken bulbs (throw away old blown leds) use the leds to fix all your other bulbs.
this is the most solution of all, but as long as you always buy the same type of bulb and brand, many led bulb use different size led and voltage
I can see thousands of people going "whyd he put that thing on the tweezers like that?" And skipping that step......
Eh it won't kill them. Good teaching moment.
It's rectified to DC at that point, probably wouldn't feel much more than a slight tingle tbh but I get it safety first
(When creating your fire hazard bulb lol)
@@baneyemail4722
any noteworthy amount of current would flow through the tweezers anyway, the resistive properties of the hand/skin are far, far, far greater.
Especially considering the comparatively low DC voltage here.
If they would be anywhat concerned for a fault causing mains to flow through, insulating the tweezers with heatshrink won't really do much, they rather should then connect the tweezers with a resistor to ground to guarantee a low-resistance path to flow over.
Or rather they shouldn't even work on it in a live state at-all if that were their concern.
That's a lot of work. I would recycle and get a new bulb in the mean time
How to recycle a light bulb?
Haha same
@@PeterMcIntyre0 home Depot
Excellent fire hazard well done .🔥
If everything in life was that simple
I'd give up .
That was way quicker and more convenient than changing the bulb.
I hope kid’s don’t watch this and try at home.
Just do this one thing...
Proceeds to do 40 other things
I think this was a bright idea. Like who would just go out and buy a new one for cheap, when you could do this and save yourself the inconvenience of replacing it altogether? The satisfaction of creating this fire hazard and putting your family at risk should be paramount, and is endorsed by the video creator. It came from the internet, so it must be great or true. All hail this life hack (or light hack?) We shall sleep easy at night knowing we have heroes giving us these quality fixes and optimal techniques. Think of all the women that must hang off his arms. So much awe, we've all been honored by watching this great video.
All you have to do is trace the blown out light with a pencil about 6-7 times to complete the circuit again.
Hahaha. . Burn
I saw one of these tutorials, used a piece of aluminum foil to fill in and it worked just the same, without all this hassle 💡
Wouldn't a thin wire wrapped around the dead led do the same thing?
Less likely to burn down a house too
That's the way I'd do it.
I'm sure I've seen him do that in a different video
Yeah an it wouldn't put way more time n effort into increasing your chances of a house fire than I feel is sensical. Tbh you could take the foil wrapper off a Hershey's kiss or similarly packaged candy make a square a few layers thick an glue it over the dead led or the socket for the dead LED and it would be a quick 2-5 min fix for a bulb you probably are gonna wanna use somewhere you don't mind the added fire hazard lol.
Yes
Handy tip. As an engineer, I feel confident soldering, but a lot of people don't have a soldering iron, but have lead, baking soda, and super glue.
He basically created a fire bomb! Super glue is FLAMMABLE...hello 🔥
@@tracyalday462 Until it dries.
Cool trick. I’ll buy another bulb.
🤣👍🏼
Love watching these videos.... Loss of brain cells makes my life less complicated.
This look so safe!
Very nice fix! Clear instructions!
Alright , but how about if another LED is burnt ,later another and another ? How many times can you fix it like that (or with a soldering gun) without increasing the overall electric power of a circuit too much ???
Me, a man with a working LED lightbulb, watching a guy break a perfectly working LED circuit to then make one out of graphite to replace it. 🤔
Won't the overall resistance change and potentially cause the other led diodes to burn out
Correct - current through remaining LEDs will increase, leading to a decreased life
I'm confused as to why you would do this?
when you can't find your soldering kit! 😅😅😅
I think this video shows a perfect master at work. It's pure pleasure to watch him. I hope there are many more videos like this to come.
Well that's certainly more than "just put super glue"....Maybe just say DIY conductive element for circuit.
Congratulations, you just made that blub blow completely two times faster to get a couple of hours of lighting.
If the chip can ACTUALLY regulate current (which is kinda its purpose) it'll only blow when next chip gives out as if it operated normally, it will just be 1/14 dimmer
He extended the life of a broken object
@@DROSTraceurADD seems like a lot of work for a 89cent bulb. I can buy a 24 pack for like 15 bucks lol
@DROSTraceurADD it simply doesn't worth that much effort. My time is worth much more.
Yes, this indeed amazing.
But Isn't make leds becoming hot faster than before? Because, suppose there are 10 leds, 1 died... The power supplies energy ofc for 10 leds, make the loads lesser, means too much power input for others
I replaced all the leds with the mix. I now have a custom dark bulb.
Now your spread the same electrical load over one less LED. The remaining LEDs are over-driven and will likely burn out more quickly. Get more pencils and super glue!
But does he really? The same load does pass through the graphite which does offer some resistance. But even if what you say it's true you're talking about an increase of what little one LED consumes spread among the remaining 15. I'm sure that's well within their tolerances, no?
@@thetalkinganvil8366 Agree 👍💯
It really shouldn't be that big of a deal. The LED array is in series and is being driven by a constant-current power supply, so the current in the circuit will stay at whatever the supply was set to, which will cause the supply voltage to be lowered, which *should* keep the rest of the LEDs happy. My bigger concern would be possibly getting conductive graphite powder in places where line voltage is present.
The Dubai light bulbs do the opposite, they use more leds to under-load them all for cooler more efficient lighting
Soldar os terminais também resolve e é bem mais eficaz.
it is bollocks in every language
lol
I love it. So simple.
I have a new appreciation for soldering irons and pencil sharpeners
Or you can spend 3 bucks for a 5 pack at dollar general and spare yourself this headache.
Exactly
So, you're out in the country or somewhere remote and all stores have closed and you need the light right now. Headache? Could you be any lazier?
@@lukespread I'm sorry I offended you.
@@headslo Relax, I wasn't serious.
The throwaway culture is wild.
What is the resistance of the graphite compared to the LED? Maybe it is better than solder.
You can't be serious.
@@nicholaslenzini1759 no he's got a point. The led that was removed was offering some resistance to the circuit. Bridging those contacts with solder would offer almost no resistance so the other LEDs will run hotter and fail sooner. If the graphite provides resistance that would actually be good.
thank you!. You gave me an idea of how to repair a broken carbon /membrane bridge in a pcb
Fire Hazzard advice for all. 😂😂😂😂😂
This would be incredibly useful, in a setting where the world no longer makes LED light bulbs. But also, I can't imagine a setting where a torch doesn't also do the trick instead.
kudos for highlighting that we can fix things and delay more e-waste from going to the landfill. (yes, that is shade at all the "i'll just buy another one" comments)
But there are a number of easier, safer, and quicker ways to jump the dead LED circuit. Personally, I could have just placed a small sliver of solid metal on it and then secured it with a drop of RTV silicon or some other high temperature safe adhesive instead of superglue.
Says the guy on welfare with way to much free time.
Bro the moment he starts pouring out the baking soda 😂 I'm dying!
Superb tip!!!If only for colouring the Sodium Bic its brilliant. The fact that it is conductive is beyond belief for one who's soldering is more like welding!!
I think it's better to use a soldering iron
I think you're a hater
I haven't disliked a video in years and wow, it felt good doing that lol
I think it's easier and quicker to buy a new bulb 💡 😜.. Also tip : a better quality bulb 🙏🏾
great job good friend keep up the good work
I wonder how many people have ended up in the emergency room after seeing videos like this and trying to actually attempt what's on them🤕.
Great way for a future insurance claim when your home burns to the ground from too much resistance causing heat. My self a $1.25 at the "Dollar" store is a safer route to go.
I'm going to go out on a limb here and say that this person is the reason for his next house fire and also why there is a minimum knowledge requirement to be certified in electronics.
बहुत ही अच्छा आइडिया दिया है। धन्यवाद जी।
Wow.... Just trying to get the plastic bulb off is far more work than I'm willing to invest.
Or a drop of solder or get a new $1 bulb
Where did you find a LED bulb fir $1?
In Australia it's around $5.
@@zdet4723 you're right , can't buy singles but about $1.80 a bulb , divided from a six pack Sylvania on Amazon, either way there's no way on earth I'd go to the trouble of this video to save a bulb.
@@zdet4723 Any Dollar Tree store has them for $1.25. If you aren't in the US, I guess you are on your own.
@@darylp8564 how are they gonna call themselves dollar tree when they're charging 1.25?! Inflation is getting out of control.
@@darylp8564 89cents. Walmart. It's like 15 bucks for 24 of them.
OR you can put in a new bulb...🤔💡🤷🏻♀️
Yes but if you are able to fix one, you can recycle a bulb and extend its life
Lots of potential applications...thanks for sharing.
So cool! I want to be a scientist now.
R.i.p idiots shocking themselves
Gonna be real, I think they make Christmas lights that can go on even if a bulb blows out feels like that's something they can do for good
Amazing good way to recycle ♻️ too💝😇🤜🏼🤛🏾
If it's all the same, I'll just throw the $3 bulb out and replace it with a new one.
Dude: "Just use..."
Also dude: proceeds with a series of specific tedious and small steps before using the glue
Noice
Never know when I might be in a position where I have to choose between replacing a light bulb or feeding myself. Thanks for the info!
God bless capitalism.
AMAZING!
Great video and very informative thank you
JUST SUPERGLUE ? LIES AGAIN
If a person already has heat shrink in their tool box they might have approached this differently.
Smart . Great video if ever need to do this.🤔
People are going to be shock8ng themselves after watching very clever