👇 More info on the GT1 Evo: www.adaptnetwork.com/gaming/sim-racing/sim-lab-gt1-evo-cockpit-review/ 🛒 Available here: adaptnet.work/GT1Evo 📺 Subscribe for more videos: ua-cam.com/users/ADAPTNetwork
Super well thought out and presented! Thank you! I really want to get this rig, and it seems like a pretty good value for how sturdy it is, even with the 155 euro shipping to the US.
Thanks so much for your kind words Colin-I really appreciate it. I was really impressed with how strong and adaptable the GT1 Evo is. I can’t think of anything that this rig couldn't handle becuase you can easily reinforce sections if needed. Let me know if you do decide to go for it. 👍
Stoked you liked the review HerrBauer-you’ll have a blast with this rig. Aluminum profile is just like a big Lego set, so assembly is quite straightforward. If you need a bit of extra guidance though, check out Barry Roland’s excellent step-by-step build guide (I’ve linked to it in the video description). 👍
It’s easy. It’s actually fun. If you haven’t assembled it already make sure to watch the Sim Racing Garage tutorial and get some screwdriver style Allen wrenches.
Thanks for your kind words and feedback Brad-I'm stoked you liked the review. Regarding the music, was it the volume or the type of music that bothered you?
Thanks for your comment antraX. I just checked Digital Motorsports ( adaptnet.work/2zxl ), and shipping to the US is also around $200. Unfortunately, I'm not aware of any US specific Sim-Lab distributors. Sorry I can't be of more help here.
Thanks for your comment Dan. I have had a similar issue with the plastic corner bracket covers; they sometimes fall off when I slide the rig around the room. To fix this, I secured the covers with small pieces of black electrical insulating tape. If you don't mind the tape showing, you could also use duct tape. It's not the most elegant solution, but it does the job. Hope that helps. 👍
@@ADAPTNetwork Thanks for the tip. How comfortable is the simlab seat for 1-2 hour stints? I currently have a sliding, reclinable seat but after 20 minutes i get back pain. Kinda solved the issue with a memory foam pillow but it gets hot and i only have around 12 degrees of leg angle to the pedals, your seat looks more comfortable.
No worries @@danut05. I find that the Sim-Lab SPEED 1 seat is quite comfortable and provides ample support-even during long sessions. I run it at the maximum tilt angle of 15° (5:35), which provides a realistic GT driving position. When purchasing a seat, I would recommend double checking the dimensions to ensure a good fit. if you’re above average build, opt for the XL version or a wider race seat like the Sim-Lab SPEED2. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build and the regular-sized SPEED 1 fits me well.
Well, I'm convinced that this is the rig I want now. Ordered the NLR GT-Track, but haven't received it yet. My biggest concern about the GT Track is the adjustability of the wheel deck and shifter mount. GT-Evo seems to have every possible adjustment I can think of.
I haven‘t tried the NLR GTtrack, but from what I can see from the specs it looks to be quite adjustable. That being said, you‘ll be hard pressed to find a more adjustable rig than the GT1 Evo as aluminium profile is like a big lego set-you can attach new peices anywhere you like. If you do decide to go for the GT1 Evo, I‘m confident you won‘t be disappointed. Hope that helps with your decision. Let me know what you go for in the end. 👍
@@ADAPTNetwork After some research I ended up getting the P1-X just to be lifetime proof, even though I do believe the GT1 Evo is more than good enough for my type of usage.
Does anyone have any idea what the weight capacity is on the GT1 Evo? Looking to upgrade from a wheel stand but I am 6’ 8” and heavy as well. Don’t want to order a cockpit only to find out it doesn’t work for me. Thanks!
Thanks for your question Nick-apologies for the slightly delayed reply. The GT1 Evo should be more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. The base frame is very strong, so weight should not be an issue. However, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps mate. 👍
Thanks for your question Martin. It's a 34″ Acer Predator X34. Being a 21:9 ultrawide, it's a nice size and aspect ratio for sim racing, general gaming and productivity.
Thanks for your comment Fr-I'm stoked you liked the review. I've yet to test a Track Racer cockpit. However, I know that the aluminium profile utlised by Sim-Lab is thicker, so that's something to consider. Hope that helps. 👍
This was recommended to me as well, but having a hard time finding it in Japan. I'll keep looking around though. It looks like this would be good for an F1 setup, no?
Thanks for your comment NxN. Sim-Lab ships worldwide if you buy directly from them ( adaptnet.work/GT1Evo ). However, for an F1 setup, I would recommend the Next Level Racing F-GT Elite ( ua-cam.com/video/fLk8sa8Kv_k/v-deo.html ). Hope that helps. 👍
Great review!! quick question if... I currently have the GT Omega Apex Wheel Stand with Rear Seat frame and was wondering if I could use the seat with the Sim-Lab GT1? The Seat has a slider... hoping it will be a straight bolt on. Thanks
Thanks for your question Charan. Yes, you should be able to bolt the seat frame directly to the GT1 Evo seat rails via the seat sliders. Slide the seat sliders forward and back to expose the bolting points and bolt through to four T-nuts in the seat rails. Hope that helps. 👍
Thanks for your question Beni. It's a 34″ Acer Predator X34. Being a 21:9 ultrawide, it's a nice size and aspect ratio for sim racing, general gaming and productivity. A 16:9 32" monitor would also work well. Though, the extra screen real estate you get with an ultrawide is useful for sim racing and flight sims. Hope that helps. 👍
Great review! What do I need to have my rig finished and ready? 1) GT1-Evo cockpit 2) Speed1 seat 3) Bucket seat bracket set. Is it enough? I've seen Sparco seat slider, but I didn't see it in you video so I assume it is optional... I don't really need it. Thank you in advance :)
Thanks Nico, I’m stoked you liked the review. Yeah, the seat slider is completely optional-you only need it if you want to adjust the seat position on the fly. You might, however, want to add a shifter mounting bracket and GT1 Evo single screen holder, if you want to mount your monitor. Hope that helps. 👍
@@ADAPTNetwork Wow, super fast reply! Well, I don't need the screen holder for now because I have my monitor attached to my desk (my screen is shared between simrig and everyday use), and I would move the entire rig on the caster wheels when I want to drive. And yes, shifter mb can be a smart purchase (I have a CSL Elite F1 for now so no shifter at the moment, but I'm considering the idea of buying one). Thank you again mate :)
Thanks for your comment VRR. The GT1 Evo is likely more than big enough for your height. It’s 135cm in length and, as you can see from the video ( 2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
great video, however its unclear how you mounted the thrustmaster th8a shifter, could please explain or share pictures how you really mounted the shifter.
Hi Koi, that's a great question. I used the TH8A shifter mounting plate from Sim-Lab ( adaptnet.work/6Muv ). This simply bolts to the shifter arm using the included countersunk screw and T-nut. You can then use two or four bolts to mount the shifter depending on how close you want to position it. Hope that helps. 👍
Thanks for your question sidestand. My Acer Predator X34 came with a custom VESA adapter to compensate for the curve. Which monitor do you have? Perhaps you could source a similar adapter from the manufacturer or online. Hope that helps. 👍
Thanks for your comment Tobiamus-I’m stoked you liked the review. My rig arrived pre-Brexit. However, you can order the GT1 Evo from Digital-Motorsports here (once it’s restocked): adaptnet.work/GT1Evo. They are based in Ireland and have published a blog post about the new Brexit arrangements. My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00). Hope that helps. 👍
Thanks for your question JG. Both rigs have their pros and cons, with the NLR GT Elite being easier to make adjustments and the Sim-Lab GT1 Evo utlising thicker-grade aluminium profile. I'm also currently reviewing the Sim-Lab GT1 Pro, which I'd highly recommend as it takes the best bits from both rigs ( adaptnet.work/GT1Pro ). Hope that helps mate. 👍
I was considering the rig but 1. having to damage corner brackets for it to work really comes across as a half baked design. Couldn’t the company have customised them for you? 2. The list of hardware that is confirmed compatible doesn’t include multiple new popular products and they can’t confirm if it will work. They should keep this info up to date.
Thanks for your comment WVS and sorry for the late reply. Sim Lab's style is to put together aluminium profile kits using off-the-shelf components and some custom pieces. I think this helps balance ease-of-build and price for the user. Both the wheel and pedal plates are pre-drilled to fit a wide range of hardware, so it will work with most wheels and pedals even if it's not listed on the website. To be safe though, I'd recommend sending Sim Lab a quick email if you have a specific wheel and/or pedal set in mind. If you're looking for a fully customised aluminium rig out-of-the-box, I'd recommend the Next Level Racing GT Elite: ua-cam.com/video/czXXNvPJaPI/v-deo.html
Thanks for your question Vincent. To build the same setup as the one I review in this video, you’ll need the Sim-Lab GT1 Evo cockpit ( adaptnet.work/GT1Evo ), bucket seat brackets ( adaptnet.work/5zmE ), the Sim-Lab SPEED1 bucket seat ( adaptnet.work/3GAg ), the Sim-Lab shifter & handbrake mount ( adaptnet.work/6Muv ), and the Sim-Lab GT1 Evo single screen holder ( adaptnet.work/6Mun ). I’ve added links to Digital-Motorsports, however you can also get these directly from Sim-Lab. Hope that helps. 👍
Great review! Really job well done! Ordered mine last Friday. My only complaint with the purchase process was the seat. I did not want to spend +300 euro on a Sparco seat and it seems that their cheapest seat that their website says is available for European customers is not available for orders to Ireland. On top of that there is wide variety of choice on car parts websites and since this rig is designed to fit any car seat I ended up ordering OPM seat here in Ireland while saving 100 Euro in comparison to what SimLab offers on their site. So piece of advice for anyone who is tighter on their budget, you can get seats cheaper elsewhere! You can even go to car scrapyard and pick up something there...I would probably do it but with lockdown in full swing...that wasn't an option haha. How long did you wait for the rig arrival since you placed the order?
Thanks for your support Kamil-I really appreciate it. 👍 Splitting up the rig and seat ordering process does have it’s pros and cons, like you say. Overall though, I think it works well and means that people can pick a seat that fits their budget and requirements. The adaptability of the GT1 Evo means that you can use pretty much any car seat that you want. One of my sim racing friends also has this rig and is using an old car seat. Like you mentioned, it’s a great way to get started on a tight budget. Let me know how you get on with your OMP seat. Which specific seat model did you go for in the end? My rig was delivered last year and there was a few week delay due to the backlog at the time. However, I think Sim-Lab has recently opened a second production facility in Germany, which has helped to reduce backlogs moving forward.
That's great to hear @@elmalloc. The P1-X looks like a beast of a rig. I found the GT1 Evo to be impressively strong, so I can't imagine anything that the P1-X couldn't handle. Which seat did you decide to pair with it?
@@ADAPTNetwork They dispatched it today. So impressive speed considering I ordered it last Friday. Fanatec on the other hand took a week to dispatch load cell pedal for my CSL pedals. haha This is the OMP seat I ended up with www.murraymotorsport.com/trs-x-steel-frame-seat I'm not sure what I am more excited about: DD1 wheel base that I ordered or the SimLabs rig. For the last 2 years I've been using Playseat challenge with my CSL elite wheel and I'm really starting to feel it in my back and neck. Playseat chalenge is extremally handy for tight spaces since you can fold the whole rig and hide it behind the couch, but there are compromises in comfort especially over longer driving sessions. On top of that...it's basically modified fishing chair haha. It is not the sturdiest thing. Over time it developed a lot of flex which I fixed to some extent with home made solutions...Before that I drove with my wheel attached to the ironing board :D So this will be my first super sturdy rig. I'm expecting huuuuge comfort and quality of life upgrade from it.
@@kamael1125 Awesome mate-that's great to hear (the OMP TRS-X seat looks like a nice choice). The Playseat Challenge was also my first sim racing rig (I compared it the the NLR F-GT Lite here:ua-cam.com/video/B9w_4PwtAj4/v-deo.html). It's a nifty little cockpit to get started and perfect for console racing. Like you though, I also found it a little uncomfortable during long sessions. In comparison, the GT1 Evo is a dream to drive in. When you set it up, I would recommend taking the time to dial in the tilt of your seat (see here for tips: 5:33). Enjoy the new rig bud. 👍
How's the seat height and width? I'm 191 cm (6'3) and pretty wide, will it be good for me? Watched the video, so the seat in the video isn't for me probably. What could be? Choosing a seat seems to be difficult.
Thanks for your question KaLaka. If you can get hold of one, I'd recommed the XL version of the Sim-Lab Speed 1 ( adaptnet.work/Speed1XL ). Else, Sparco makes wider versions of some models. Hope that helps. 👍
Hi Barry, you can now order the GT1 Evo from Digital Motorsports here: adaptnet.work/GT1Evo. They are based in Ireland and have published a blog post about the new Brexit arrangements. My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00). Hope that helps. 👍
Hey I'm looking at getting this rig, as I'm planning on upgrading to a load cell brake and direct drive wheel in the near future. Anyway I want to save some money on a chair and I was wondering if you could just mount any chair onto this rig even if it's designed for sim racing?
Thanks for your question Ryan and apologies for the delayed reply. You can mount pretty much any car seat you like to the GT1 Evo. If you have a side-mount seat, you can use the bucket seat brackets ( adaptnet.work/5zmE ). Otherwise, you can base-mount a seat directly to the seat rails using a seat slider ( adaptnet.work/7jG5 ). Hope that helps. 👍
Thanks for your question Bzrnsy. I recieved the rig before the new Brexit arrangements came into place. However, I would expect delivery to still take less than 1 week from Ireland to the UK. I hope that helps mate. 👍
Thanks for your questions Péter. I have the regular size Sim-Lab SPEED1 seat (4:07). At its tightest point, the seat measures 33cm across. So, if you’re above average build, opt for the XL version or a wider race seat like the Sim-Lab SPEED2. The monitor I’m using is the 34″ Acer X34.
Thanks for your question Damian . The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. 👍
Thanks for your question E46. According to the Sim-Lab website, the GT1 Evo should be restocked next week. However, I’m not sure what the shipping time to the US will be. Though, I would think about 1-2 weeks max. Hope that helps. 👍
Thanks for your question ZiK. The Acer Predator X34 works brilliantly for sim racing. A single monitor is a lot easier to set up and run than a triple screen setup. The 21:9 aspect ratio also provides a decent field of view and the 100Hz refresh rate (latest model now has 120Hz), is more than enough for sim racing. In the near future though, I’m looking to upgrade to a 49″ super ultrawide, for a larger field of view. So, if space and budget isn’t an issue, I would recommend going with a 32:9 aspect ratio monitor. Else, something like the Acer Predator X34 will still work really well. Hope that helps. 👍
@@ADAPTNetwork Thanks :) I was between 21:9 IPS and VA but I will get IPS and in the future I will take IPS to my PC and maybe get LG OLED for sim rig if I am crazy enough :) But for now I will get 21:9 :)
Great choice @@Elementpunx. The Acer Predator X34 has an IPS display and it has good colour accuracy and vibrance. I’m not the biggest fan of OLED screens for gaming because they are more susceptible to screen burn-in. Though I think this is improving with the latest iterations.
Thanks for your question Spartan. While the GT1 Evo can handle high-torque direct drive wheels, I would actually recommend the new GT1 Pro ( adaptnet.work/GT1Pro ). I'm currently reviewing this rig, so stay posted for that. But, in summary, the GT1 Pro utilises bespoke alloy plates, to join pieces of profile, and the base profile is pre-machined, so that it bolts together directly. This all results in a stronger overall build. Additionally, it comes with hardwre to mount motion servo systems. Hope that helps. 👍
I have another question. From the video the GT1 wheelbase uprights looks really short compared to the P1-X’s wheelbase uprights? Is it sufficient enough in height relative to one’s torso lined up to the wheelbase while in seat?
No worries VRR-I'm glad I can help. I think the wheel mount uprights are plenty tall enough. They measure 58cm (66cm if you include the base) and you can fine tune your wheel position by adjusting the angle of the wheel plate. In this video, I use the Thrustmaster TX wheel base. The wheel plate is positioned quite high because it needs to be angled downward for correct wheel positioning. However, I'm currently running the Fanatec CSL DD wheel base, which is positioned a few inches lower and angled upright. Does that make sense?
Hello! Do u think is good for 1.84cm height? Seems very short 2. Do u know how much is the shipping cost in Europe? 3. Your seat is better than sparco r100 ?
Thanks for your questions Bobby-I’ll do my best to answer them (below). 1. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video ( 2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. 2. If you buy the rig from Digital Motorsports ( adaptnet.work/GT1Evo ), then economy shipping to most European countries currently costs €115.74. If you buy direct from Sim-Lab, I think it‘s currently €122.42. 3. I haven’t tried the Sparco R100, but it looks to have similar dimensions to the SPEED1 (which I have). The Sparco R100 is more of a sport seat with recline function, whereas the SPEED1 is a fixed bucket seat with high bolster for extra support. I found the SPEED1 to be very comfortable, but if you‘re above average build I think you may find the Sparco R100 a little roomier. Otherwise, it just comes down to personal preference. Hope that helps. 👍
@@ADAPTNetwork I meant to ask the internal thickness/code for the 80/40 as when I'm trying to look them online they are or varying thickness internally.
Thanks for your comment Mettfisch. I’m not sure which piece of equipment you are reffering to, as you left this out of your question. However, the GT1-Evo is highly adjustable, so it is possible to change the position of every mounting point and bring the wheel, pedals, shifter and screen closer to you. Hope this answers your question. If not, please let me know. 👍
No worries @@mettfisch2624. Yes, using the single screen holder, you can move the monitor a little closer to the wheel. As you can see from the video (11:30), I have room to move the screen about two inches closer. If that’s not enough though, I would recommend using a free-standing monitor mount. Hope that helps. 👍
Thanks for your question Brady. In my opinion, if you’re the only person that will be using the rig, then there is no need to use seat sliders-you can simply bolt the seat in place to match your ideal driving position. However, if different people of different heights will be using the rig, then seat sliders would prove useful. Hope that helps. 👍
Thanks for your question Camber King . The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
Thanks for your question Tony. In this video, I’m running the Thrustmaster TX wheel base, with Ferrari 458 Italia wheel; the Thrustmaster T3PA pedal set; and the Thrustmaster TH8A shifter.
Thanks for your comment Zeljko. It looks like the GT1 Evo is currently in stock directly from Sim-Lab ( sim-lab.eu ). Digital Motorsports should also have them back in stock soon as well ( adaptnet.work/GT1Evo ). Hope that helps. 👍
Thanks for your comment TopSelections. While you could probably source the aluminium profile slightly cheaper, the advantage of purchasing a kit like this is that everything comes pre-cut (with soft edges) to fit together perfectly. All of the hardware to assemble the rig is also included, along with some spares, and the bespoke wheel and pedal decks make it a lot easier to mount your equipment and fine-tune your driving position. Currently, you can pick up the GT1 Evo from Digital Motorsports for about £330 (VAT included) ( adaptnet.work/GT1Evo ). At this price, I think the GT1 Evo is a great deal-especially, when compared to some other alumnium profile rigs like the new Next Level Racing F-GT Elite. You do have to purchase a seat separately, but this is also the case with most other aluminium profile cockpits. The great thing is that this rig will support almost any car seat you like, so you can start with a really cheap second hand one and upgrade down the line.
Great question Oren. You‘ll need to use two shifter and handbrake mounting brackets (one for the shifter and one for the handbrake). These are available from Sim-Lab, or you can fabricate your own. You might get away with mounting the handbrake directly behind the shifter on the side mount that comes with the GT1 Evo. However, depending on your equipment, it might be worth purchasing an extra mounting point from Sim-Lab, or some extra aluminium profile, to strengthen the side mount, or if you wanted to mount the handbrake and shifter side-by-side. Hope that helps mate. 👍
Hello ! Can i mount the pedal plate without the uprights? I like the pedal plate flat and lower to the ground or maybe even down tilted a little bit in the front ,thanks
Thanks for your question Tim. Yes, there are enough M6 screws included in the kit to mount your wheel, pedals, and shifter. I would, however, recommend picking up a pack of M6 washers to ensure a tight and secure connection to the frame. Extra M8 screws, to mount a seat, are also included with the seat brackets. Hope that helps. 👍
Thanks for your question tyncam. In order to mount a seat, you need to purchase the additional side-mount seat brackets (5.28). These come with with the necessary bolts and can be picked up for around €39 EUR ( adaptnet.work/5zmE ). Hope that helps. 👍
No worries @@tyncam24-I’m really glad you found my review useful. We’ll be publishing some new sim racing content over the next few weeks, so keep an eye open for that. See you on the virtual race track. 🏎🏁
Thanks for your question @@dalemiller1441, sorry for the late reply. The T3PM pedals, that come with the T248 wheel, have a few different mounting points. Two mounting points at the back, underneath the throttle and clutch pedals (as with the T3PA pedals I use in this video), and three at the front. The Sim-Lab P1-X comes with two pieces of alumimium profile for the pedal deck, on which you can only mount select pedals directly (those which have bolt access from above). So, to mount the T3PM pedals, you’ll need to get the additional pedal slider baseplate ( adaptnet.work/6VLj ). I linked to Digital-Motorsports here, but you can also get the baseplate, with or without seat sliders and a heel rest, directly from Sim-Lab. You first need to mount your pedals to the baseplate, and then the baseplate to the aluminium profile. Hope that helps. 👍
No worries Stewrt. The GT1 Evo is 135 x 58cm (2:02). Depending on where you mount the seat though, the rig may be a bit longer. I bumped the seat forward (along with the wheel and pedals) to keep the footprint of the rig as small as possible. Hope that helps. 👍
@@ADAPTNetwork Thank you so much I got plenty a room I built a platform a while back and it should fit perfect tomorrow I have a guy coming out putting my new TV on the wall Super cool 50 inch TV
Thanks for your comment Dylan. The GT1 Evo is likely more than big enough for your height. It’s 135cm in length and, as you can see from the video ( 2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
Hi James, that's a great question. When I recieved the rig, there was no import duty/tax to pay. However, I think this may now have changed. I reached out to Richard from Sim-Lab for information on this and he said that Sim-Lab will be posting a blog post about this shortly. Keep an eye on the Sim-Lab website, but I'll also update this comment as soon as the post is published. Hope that helps. 👍
@@ADAPTNetwork Just to update you, Messaged pure sim who I’m getting the rig from they also said the think it’s duty/tax free, however I did have to pay £98 “government charges” which I guess is import tax/duty.
Thanks for the update @@JC21x. Yeah, that sounds like a VAT charge or something similar. I don't think Sim Lab has posted the blog post yet, but I'm keeping an eye out for it.
Update: Digital-Motorsports, which is based in Ireland, has now published a blog post about the new Brexit arrangements ( adaptnet.work/3WhT ). My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00).
Thanks for your question Jojo. The GT1 Evo doesn’t come with a seat as standard. However, thanks to the rig’s flexibility, you can mount pretty much any type of car seat you want. Sim-Lab also offers a range of sport and bucket seats for you to choose from, including the sim racing specific Sim-Lab SPEED1 which I tested ( adaptnet.work/3GAg ).
Thanks for your question TheDummies. For sure, an adapter should do the trick. The VESA mount that comes with the GT1 Evo single screen holder supports VESA patterns 100 x 100mm, 100 x 200mm and 200 x 200mm. So you’ll need an adapter that converts one of these patterns to 75 x 75mm. Hope that helps.👍
Thanks for your question @@Abbbk35. The GT1 Evo single screen holder is sold separately ( adaptnet.work/6Mun ). It’s depth and height adjustable and mounts VESA patterns 100 x 100mm, 100 x 200mm and 200 x 200mm. 👍
Thanks for your question Wolf. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video ( 2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
Thanks for your question V ι ƈ ƚ σ ɾ. I'm not sure about a gaming chair (it will depend on the mounting points), but you can mount pretty much any car seat you like to the GT1 Evo. If you have a side-mount seat, you can use the bucket seat brackets ( adaptnet.work/5zmE ). Otherwise, you can base-mount a seat directly to the seat rails using a seat slider ( adaptnet.work/7jG5 ). Hope that helps. 👍
Haha, for sure-the GT1 Evo is a beast and can handle most hardware you throw at it. In this video though, I wanted to illustrate the upgrade path that I think a lot of people will take (first upgrading the rig and then the hardware). I’m planning to make a follow up video with a direct drive wheel and load cell pedals in the near future. 👍
Thanks for your comment Mika. You are right that you could probably source the aluminium profile slightly cheaper. However, the advantage of purchasing a kit like this is that everything comes pre-cut (with soft edges) to fit together perfectly. All of the hardware to assemble the rig is also included, along with some spares, and the bespoke wheel and pedal decks make it a lot easier to mount your equipment and fine-tune your driving position. In the end, I think there are advantages to either route. 👍
Where can you get this for that amount and wheel deck as well as the pedal deck? Very curious as nothing comes close to this in terms of value, fit and finish.
Thanks for your question ex1t. In my opinion, the GT1 Evo single screen holder ( adaptnet.work/6Mun ) is the perfect option for running an ultrawide or one of the latest generation 49″ super ultrawides. I found that it performed flawlessly with my setup-securely holding my 34″ Acer X34 in place without any flex issues. Hope that helps. 👍
👇 More info on the GT1 Evo:
www.adaptnetwork.com/gaming/sim-racing/sim-lab-gt1-evo-cockpit-review/
🛒 Available here:
adaptnet.work/GT1Evo
📺 Subscribe for more videos:
ua-cam.com/users/ADAPTNetwork
Had my GT1 Evo for over a year now and have loved every minute.
Thanks for your comment Jon. For sure-thanks to the adaptability of the GT1 Evo, I think it will be my daily driver for quite a while. 👍
Three years later, would you still recommend this cockpit? I am thinking about getting it.
Clear and concise review. Exactly what I needed. Made my final decision based on your video. Ordering tomorrow. Thanks!
Thanks for your comment Tank-I’m really glad you found my review useful. Happy sim racing! 🏎🏁
Hi there, do you still have the rig, if so, how is it holding up?
Super well thought out and presented! Thank you! I really want to get this rig, and it seems like a pretty good value for how sturdy it is, even with the 155 euro shipping to the US.
Thanks so much for your kind words Colin-I really appreciate it. I was really impressed with how strong and adaptable the GT1 Evo is. I can’t think of anything that this rig couldn't handle becuase you can easily reinforce sections if needed. Let me know if you do decide to go for it. 👍
I got mine in less than a week. Its totally worth the shipping.
Thanks for sharing this @@wb3191. Hope you‘re enjoying the new rig. 👍
got mine in 3 days. including the day i ordered it. if you havent already bought it, get it. itll be the only rig youll get
Thanks for sharing this @@jaychang689. Glad you’re enjoying the GT1 Evo as much as me. 👍
Currently waiting for mine to arrive, this got me excited! Although i'm a bit scared of the assembly, never done anything like it.
Stoked you liked the review HerrBauer-you’ll have a blast with this rig. Aluminum profile is just like a big Lego set, so assembly is quite straightforward. If you need a bit of extra guidance though, check out Barry Roland’s excellent step-by-step build guide (I’ve linked to it in the video description). 👍
It’s easy. It’s actually fun. If you haven’t assembled it already make sure to watch the Sim Racing Garage tutorial and get some screwdriver style Allen wrenches.
Awesome review! Thank you! Only thing I disliked was the repetitive music :D
Thanks for your kind words and feedback Brad-I'm stoked you liked the review. Regarding the music, was it the volume or the type of music that bothered you?
Very nice review👍🏽
Thanks for your comment Jacob-I appreciate it.
Thanks @Mr. Stafford-I'm glad you found the review useful. 👍
very nice review ,thanks
Thanks for taking the time to comment Foggy-I’m really glad you liked the review. 👍
Love the price don’t like the shipping to the us from 400 to 650. 200 dollars in shipping is crazy
Thanks for your comment antraX. I just checked Digital Motorsports ( adaptnet.work/2zxl ), and shipping to the US is also around $200. Unfortunately, I'm not aware of any US specific Sim-Lab distributors. Sorry I can't be of more help here.
Great video! Looking to buy a rig and Will probably end up with this one 👍🏻
Thanks for your comment P E-I’m stoked you liked the review. Let me know if you have any additional questions about the GT1 Evo. 👍
The plastic angle covers on my Evo are popping out at the lightest breeze, other than that, it's brilliant.
Thanks for your comment Dan. I have had a similar issue with the plastic corner bracket covers; they sometimes fall off when I slide the rig around the room. To fix this, I secured the covers with small pieces of black electrical insulating tape. If you don't mind the tape showing, you could also use duct tape. It's not the most elegant solution, but it does the job. Hope that helps. 👍
@@ADAPTNetwork Thanks for the tip. How comfortable is the simlab seat for 1-2 hour stints? I currently have a sliding, reclinable seat but after 20 minutes i get back pain. Kinda solved the issue with a memory foam pillow but it gets hot and i only have around 12 degrees of leg angle to the pedals, your seat looks more comfortable.
No worries @@danut05. I find that the Sim-Lab SPEED 1 seat is quite comfortable and provides ample support-even during long sessions. I run it at the maximum tilt angle of 15° (5:35), which provides a realistic GT driving position. When purchasing a seat, I would recommend double checking the dimensions to ensure a good fit. if you’re above average build, opt for the XL version or a wider race seat like the Sim-Lab SPEED2. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build and the regular-sized SPEED 1 fits me well.
Well, I'm convinced that this is the rig I want now. Ordered the NLR GT-Track, but haven't received it yet. My biggest concern about the GT Track is the adjustability of the wheel deck and shifter mount. GT-Evo seems to have every possible adjustment I can think of.
I haven‘t tried the NLR GTtrack, but from what I can see from the specs it looks to be quite adjustable. That being said, you‘ll be hard pressed to find a more adjustable rig than the GT1 Evo as aluminium profile is like a big lego set-you can attach new peices anywhere you like. If you do decide to go for the GT1 Evo, I‘m confident you won‘t be disappointed. Hope that helps with your decision. Let me know what you go for in the end. 👍
@@ADAPTNetwork After some research I ended up getting the P1-X just to be lifetime proof, even though I do believe the GT1 Evo is more than good enough for my type of usage.
Great choice @@wuzumaki-the P1-X can handle anything you throw at it!
Does anyone have any idea what the weight capacity is on the GT1 Evo? Looking to upgrade from a wheel stand but I am 6’ 8” and heavy as well. Don’t want to order a cockpit only to find out it doesn’t work for me. Thanks!
Thanks for your question Nick-apologies for the slightly delayed reply.
The GT1 Evo should be more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. The base frame is very strong, so weight should not be an issue. However, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps mate. 👍
That monitor looks great, whats the size?
Thanks for your question Martin. It's a 34″ Acer Predator X34. Being a 21:9 ultrawide, it's a nice size and aspect ratio for sim racing, general gaming and productivity.
Ciao, do you know TR1 always from Sim-lab? Which is your opinion comparing it with GT1-Evo? Great review on GT1! Well done!
Thanks for your comment Fr-I'm stoked you liked the review. I've yet to test a Track Racer cockpit. However, I know that the aluminium profile utlised by Sim-Lab is thicker, so that's something to consider. Hope that helps. 👍
@@ADAPTNetwork I was referring to TR1 product always from Sim lab but I understand from your comment that probably you haven’t yet tested. Thanks
Thanks for clarifying @@fr5102. Yeah, I haven't tested the TR1 yet, but I'll add it to the to-review list. 👍
This was recommended to me as well, but having a hard time finding it in Japan. I'll keep looking around though.
It looks like this would be good for an F1 setup, no?
Thanks for your comment NxN. Sim-Lab ships worldwide if you buy directly from them ( adaptnet.work/GT1Evo ). However, for an F1 setup, I would recommend the Next Level Racing F-GT Elite ( ua-cam.com/video/fLk8sa8Kv_k/v-deo.html ). Hope that helps. 👍
Great review!! quick question if... I currently have the GT Omega Apex Wheel Stand with Rear Seat frame and was wondering if I could use the seat with the Sim-Lab GT1? The Seat has a slider... hoping it will be a straight bolt on. Thanks
Thanks for your question Charan. Yes, you should be able to bolt the seat frame directly to the GT1 Evo seat rails via the seat sliders. Slide the seat sliders forward and back to expose the bolting points and bolt through to four T-nuts in the seat rails. Hope that helps. 👍
@@ADAPTNetwork brilliant thank you !
Which monitor are you using? And what size do you recommend? Is 32" enough?
Thanks for your question Beni. It's a 34″ Acer Predator X34. Being a 21:9 ultrawide, it's a nice size and aspect ratio for sim racing, general gaming and productivity. A 16:9 32" monitor would also work well. Though, the extra screen real estate you get with an ultrawide is useful for sim racing and flight sims. Hope that helps. 👍
I may pull the trigger on this rig as well
Great choice Snowdays-enjoy the new rig and see you on the virtual race track! 🏎🏁
@@ADAPTNetwork greatly appreciate the video as well as the quick response, subbed!
Thanks @@SnowdaysnPaintjobs -I'm stoked to have you with us. 👍
@@ADAPTNetwork will it handle the fanatec gt dd 5-8nm? Even on the stock rig?
Thanks for your question @@SnowdaysnPaintjobs. Yes, I've been running the Fanatec CSL DD 8Nm on this very rig without any issues. Hope that helps. 👍
Great review! What do I need to have my rig finished and ready? 1) GT1-Evo cockpit 2) Speed1 seat 3) Bucket seat bracket set. Is it enough? I've seen Sparco seat slider, but I didn't see it in you video so I assume it is optional... I don't really need it. Thank you in advance :)
Thanks Nico, I’m stoked you liked the review. Yeah, the seat slider is completely optional-you only need it if you want to adjust the seat position on the fly. You might, however, want to add a shifter mounting bracket and GT1 Evo single screen holder, if you want to mount your monitor. Hope that helps. 👍
@@ADAPTNetwork Wow, super fast reply! Well, I don't need the screen holder for now because I have my monitor attached to my desk (my screen is shared between simrig and everyday use), and I would move the entire rig on the caster wheels when I want to drive. And yes, shifter mb can be a smart purchase (I have a CSL Elite F1 for now so no shifter at the moment, but I'm considering the idea of buying one). Thank you again mate :)
No worries @@nicofarella. Glad I could help-enjoy the new rig bud.
This looks really compact compared to the P1-X. I’m roughly 6’2”. Will this be enough leg space for those that are 6’0” and over?
Thanks for your comment VRR. The GT1 Evo is likely more than big enough for your height. It’s 135cm in length and, as you can see from the video (
2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
@@ADAPTNetwork okay cool thank you 👍🏽👍🏽
great video, however its unclear how you mounted the thrustmaster th8a shifter, could please explain or share pictures how you really mounted the shifter.
Hi Koi, that's a great question. I used the TH8A shifter mounting plate from Sim-Lab ( adaptnet.work/6Muv ). This simply bolts to the shifter arm using the included countersunk screw and T-nut. You can then use two or four bolts to mount the shifter depending on how close you want to position it. Hope that helps. 👍
@@ADAPTNetwork aaah so thats how it works, its very clear to me now, thnk you sir !
No worries @@TheSnake0444, glad I could help.
I have a 34” curved monitor. What adapter did you use to mount with simlabs flat vesa plate? Thanks for the vid.
Thanks for your question sidestand. My Acer Predator X34 came with a custom VESA adapter to compensate for the curve. Which monitor do you have? Perhaps you could source a similar adapter from the manufacturer or online. Hope that helps. 👍
What are the games you played during the review?
Thanks for your question Y. I was running iRacing in this review: adaptnet.work/iRacing
I’m curious but would the sim lab bucket seats fit a gt omega prime or prime lite rig?
Absolutely James; the Sim-Lab SPEED1 can be mounted on most aluminium profile rigs using compatible side-mount seat brackets. Hope that helps. 👍
Anyone ordered one of these to the UK recently? What are the import costs like? Thanks for the great video!
Thanks for your comment Tobiamus-I’m stoked you liked the review. My rig arrived pre-Brexit. However, you can order the GT1 Evo from Digital-Motorsports here (once it’s restocked): adaptnet.work/GT1Evo. They are based in Ireland and have published a blog post about the new Brexit arrangements. My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00). Hope that helps. 👍
By now you've tried the GT Elite too, which would you prefer, the GT1 Evo or the GT Elite?
Thanks for your question JG. Both rigs have their pros and cons, with the NLR GT Elite being easier to make adjustments and the Sim-Lab GT1 Evo utlising thicker-grade aluminium profile. I'm also currently reviewing the Sim-Lab GT1 Pro, which I'd highly recommend as it takes the best bits from both rigs ( adaptnet.work/GT1Pro ). Hope that helps mate. 👍
@@ADAPTNetwork I see, thanks. NLR then, as we have no practical option for Simlab to ship to us.
No worries @@jgloc25. If it helps, you can also use our coupon code 'ADAPT' to save 5% when you buy the rig directly from NLR: adaptnet.work/GTElite
I was considering the rig but 1. having to damage corner brackets for it to work really comes across as a half baked design. Couldn’t the company have customised them for you? 2. The list of hardware that is confirmed compatible doesn’t include multiple new popular products and they can’t confirm if it will work. They should keep this info up to date.
Thanks for your comment WVS and sorry for the late reply. Sim Lab's style is to put together aluminium profile kits using off-the-shelf components and some custom pieces. I think this helps balance ease-of-build and price for the user. Both the wheel and pedal plates are pre-drilled to fit a wide range of hardware, so it will work with most wheels and pedals even if it's not listed on the website. To be safe though, I'd recommend sending Sim Lab a quick email if you have a specific wheel and/or pedal set in mind. If you're looking for a fully customised aluminium rig out-of-the-box, I'd recommend the Next Level Racing GT Elite: ua-cam.com/video/czXXNvPJaPI/v-deo.html
Nice video thanks. At 7.04 you mention 66cm is this measured from the floor?
Thanks for your question Djk0t. Yes, this is measured from the floor. 👍
I’m considering buying one but what extra things do you need to get?
Pls write exactly what things!!!
(:
Thanks for your question Vincent. To build the same setup as the one I review in this video, you’ll need the Sim-Lab GT1 Evo cockpit ( adaptnet.work/GT1Evo ), bucket seat brackets ( adaptnet.work/5zmE ), the Sim-Lab SPEED1 bucket seat ( adaptnet.work/3GAg ), the Sim-Lab shifter & handbrake mount ( adaptnet.work/6Muv ), and the Sim-Lab GT1 Evo single screen holder ( adaptnet.work/6Mun ). I’ve added links to Digital-Motorsports, however you can also get these directly from Sim-Lab. Hope that helps. 👍
@@ADAPTNetwork
Thanks for replying!
Now you have a new subscriber!
/ Vincent
No worries at all @@vincent.b2021-I’m glad I could help. And, thanks so much for subscribing-it means a lot. 👍
Hi. Bit late....Did the single monitor stand come with brackets and the nuts?
Thanks for your question Seb. Yes, the single screen holder comes with brackets and all the hardware you need to mount it. 👍
@ADAPT Network thank u. Much appreciated. Actually just arrived today. Will start building this weekend.
No worries @@sebastianmeldau2618. Enjoy the new rig and see you on the virtual racetrack! 🤙
Great review! Really job well done!
Ordered mine last Friday.
My only complaint with the purchase process was the seat. I did not want to spend +300 euro on a Sparco seat and it seems that their cheapest seat that their website says is available for European customers is not available for orders to Ireland.
On top of that there is wide variety of choice on car parts websites and since this rig is designed to fit any car seat I ended up ordering OPM seat here in Ireland while saving 100 Euro in comparison to what SimLab offers on their site.
So piece of advice for anyone who is tighter on their budget, you can get seats cheaper elsewhere! You can even go to car scrapyard and pick up something there...I would probably do it but with lockdown in full swing...that wasn't an option haha.
How long did you wait for the rig arrival since you placed the order?
In USA I ordered my Sim Lab P1-x and it came within 1 week.
Thanks for your support Kamil-I really appreciate it. 👍
Splitting up the rig and seat ordering process does have it’s pros and cons, like you say. Overall though, I think it works well and means that people can pick a seat that fits their budget and requirements. The adaptability of the GT1 Evo means that you can use pretty much any car seat that you want. One of my sim racing friends also has this rig and is using an old car seat. Like you mentioned, it’s a great way to get started on a tight budget. Let me know how you get on with your OMP seat. Which specific seat model did you go for in the end?
My rig was delivered last year and there was a few week delay due to the backlog at the time. However, I think Sim-Lab has recently opened a second production facility in Germany, which has helped to reduce backlogs moving forward.
That's great to hear @@elmalloc. The P1-X looks like a beast of a rig. I found the GT1 Evo to be impressively strong, so I can't imagine anything that the P1-X couldn't handle. Which seat did you decide to pair with it?
@@ADAPTNetwork They dispatched it today. So impressive speed considering I ordered it last Friday.
Fanatec on the other hand took a week to dispatch load cell pedal for my CSL pedals. haha
This is the OMP seat I ended up with www.murraymotorsport.com/trs-x-steel-frame-seat
I'm not sure what I am more excited about: DD1 wheel base that I ordered or the SimLabs rig.
For the last 2 years I've been using Playseat challenge with my CSL elite wheel and I'm really starting to feel it in my back and neck.
Playseat chalenge is extremally handy for tight spaces since you can fold the whole rig and hide it behind the couch, but there are compromises in comfort especially over longer driving sessions.
On top of that...it's basically modified fishing chair haha. It is not the sturdiest thing. Over time it developed a lot of flex which I fixed to some extent with home made solutions...Before that I drove with my wheel attached to the ironing board :D
So this will be my first super sturdy rig. I'm expecting huuuuge comfort and quality of life upgrade from it.
@@kamael1125 Awesome mate-that's great to hear (the OMP TRS-X seat looks like a nice choice). The Playseat Challenge was also my first sim racing rig (I compared it the the NLR F-GT Lite here:ua-cam.com/video/B9w_4PwtAj4/v-deo.html). It's a nifty little cockpit to get started and perfect for console racing. Like you though, I also found it a little uncomfortable during long sessions. In comparison, the GT1 Evo is a dream to drive in. When you set it up, I would recommend taking the time to dial in the tilt of your seat (see here for tips: 5:33). Enjoy the new rig bud. 👍
How's the seat height and width? I'm 191 cm (6'3) and pretty wide, will it be good for me? Watched the video, so the seat in the video isn't for me probably. What could be? Choosing a seat seems to be difficult.
Thanks for your question KaLaka. If you can get hold of one, I'd recommed the XL version of the Sim-Lab Speed 1 ( adaptnet.work/Speed1XL ). Else, Sparco makes wider versions of some models. Hope that helps. 👍
@@ADAPTNetwork Thanks, I'll look into these
Can you move the shifter to the right?
Thanks for your question microwaveaspoon. Yes, the shifter arm can installed on the right side of the rig. 👍
Has anyone ordered this cockpit post Brexit? If so, were there additional costs apart from shipping and 20% VAT?
Hi Barry, you can now order the GT1 Evo from Digital Motorsports here: adaptnet.work/GT1Evo. They are based in Ireland and have published a blog post about the new Brexit arrangements. My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00). Hope that helps. 👍
thats the rig im gonna settle on
Great choice Pizza; the Sim-Lab GT1 Evo has been my primary rig for some time. Happy sim racing mate! 🏎🏁
thanks @@ADAPTNetwork
Hey I'm looking at getting this rig, as I'm planning on upgrading to a load cell brake and direct drive wheel in the near future. Anyway I want to save some money on a chair and I was wondering if you could just mount any chair onto this rig even if it's designed for sim racing?
Thanks for your question Ryan and apologies for the delayed reply. You can mount pretty much any car seat you like to the GT1 Evo. If you have a side-mount seat, you can use the bucket seat brackets ( adaptnet.work/5zmE ). Otherwise, you can base-mount a seat directly to the seat rails using a seat slider ( adaptnet.work/7jG5 ). Hope that helps. 👍
@@ADAPTNetwork thanks 👍
No worries @@ryancairns5518. Glad I could help. 🤙
Hey mate, I’m thinking of ordering this from Digital-Motorsports, how long did your delivery take?
Thanks for your question Bzrnsy. I recieved the rig before the new Brexit arrangements came into place. However, I would expect delivery to still take less than 1 week from Ireland to the UK. I hope that helps mate. 👍
Hy
Which size of seat do you bought and what is your screen size?
Thx
Thanks for your questions Péter. I have the regular size Sim-Lab SPEED1 seat (4:07). At its tightest point, the seat measures 33cm across. So, if you’re above average build, opt for the XL version or a wider race seat like the Sim-Lab SPEED2. The monitor I’m using is the 34″ Acer X34.
Do you think its comfortable when my length is 1.94m?
Thanks for your question Damian
. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. 👍
@@ADAPTNetwork thank you very much for the fast reply i watched ur vid again hahaha and then i had my answer i already ordered it so cant wait🔥
No worries @@damian7980-glad I could help. Enjoy the new rig dude and see you on the virtual race track! 🏁
@@ADAPTNetwork 🔥🔥
@@damian7980 do you have simlab speed 1 seat ? Is comfortable for your 1.94 length ? I'm 1.90 cm
Does anyone know what’s the shipping wait time, i’m located in the US.
Thanks for your question E46. According to the Sim-Lab website, the GT1 Evo should be restocked next week. However, I’m not sure what the shipping time to the US will be. Though, I would think about 1-2 weeks max. Hope that helps. 👍
A bit off topic. How do you like this 34 curved screen for racing?
Thanks for your question ZiK. The Acer Predator X34 works brilliantly for sim racing. A single monitor is a lot easier to set up and run than a triple screen setup. The 21:9 aspect ratio also provides a decent field of view and the 100Hz refresh rate (latest model now has 120Hz), is more than enough for sim racing. In the near future though, I’m looking to upgrade to a 49″ super ultrawide, for a larger field of view. So, if space and budget isn’t an issue, I would recommend going with a 32:9 aspect ratio monitor. Else, something like the Acer Predator X34 will still work really well. Hope that helps. 👍
@@ADAPTNetwork Thanks :) I was between 21:9 IPS and VA but I will get IPS and in the future I will take IPS to my PC and maybe get LG OLED for sim rig if I am crazy enough :) But for now I will get 21:9 :)
Great choice @@Elementpunx. The Acer Predator X34 has an IPS display and it has good colour accuracy and vibrance. I’m not the biggest fan of OLED screens for gaming because they are more susceptible to screen burn-in. Though I think this is improving with the latest iterations.
Can this handle motion and or the simucube 2 sport 17nm?
Thanks for your question Spartan. While the GT1 Evo can handle high-torque direct drive wheels, I would actually recommend the new GT1 Pro ( adaptnet.work/GT1Pro ). I'm currently reviewing this rig, so stay posted for that. But, in summary, the GT1 Pro utilises bespoke alloy plates, to join pieces of profile, and the base profile is pre-machined, so that it bolts together directly. This all results in a stronger overall build. Additionally, it comes with hardwre to mount motion servo systems. Hope that helps. 👍
What monitor is he using?
Thanks for your question A. It's the Acer Predator X34. 👍
Do you recon this would be the right size for someone who is 5,4 foot I’m thinking about getting one but not sure if it would be to big
Thanks for your question. Every aspect of the GT1 Evo is adjustable, so you will have no problems at all. Hope that helps. 👍
I have another question. From the video the GT1 wheelbase uprights looks really short compared to the P1-X’s wheelbase uprights? Is it sufficient enough in height relative to one’s torso lined up to the wheelbase while in seat?
No worries VRR-I'm glad I can help. I think the wheel mount uprights are plenty tall enough. They measure 58cm (66cm if you include the base) and you can fine tune your wheel position by adjusting the angle of the wheel plate. In this video, I use the Thrustmaster TX wheel base. The wheel plate is positioned quite high because it needs to be angled downward for correct wheel positioning. However, I'm currently running the Fanatec CSL DD wheel base, which is positioned a few inches lower and angled upright. Does that make sense?
@@ADAPTNetwork yes that make sense now. Thank you.
Hello! Do u think is good for 1.84cm height? Seems very short
2. Do u know how much is the shipping cost in Europe?
3. Your seat is better than sparco r100 ?
Thanks for your questions Bobby-I’ll do my best to answer them (below).
1. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (
2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build.
2. If you buy the rig from Digital Motorsports ( adaptnet.work/GT1Evo ), then economy shipping to most European countries currently costs €115.74. If you buy direct from Sim-Lab, I think it‘s currently €122.42.
3. I haven’t tried the Sparco R100, but it looks to have similar dimensions to the SPEED1 (which I have). The Sparco R100 is more of a sport seat with recline function, whereas the SPEED1 is a fixed bucket seat with high bolster for extra support. I found the SPEED1 to be very comfortable, but if you‘re above average build I think you may find the Sparco R100 a little roomier. Otherwise, it just comes down to personal preference. Hope that helps. 👍
@@ADAPTNetwork thank u ! Very informative and I will subscribe!
No worries @@bratosin1. Thanks for the sub-I really appreciate the support.
What is the thicknss of this 80/40 profile?
Thanks for your question KINA. 4080 profile measure 40 x 80mm (1:36). 👍
@@ADAPTNetwork I meant to ask the internal thickness/code for the 80/40 as when I'm trying to look them online they are or varying thickness internally.
@@ranakirti I measure the core width at 15mm and the thinnest outside edge at 2mm. Hope that helps. 👍
@@ADAPTNetwork u r a superstar. appreciate it. 💐
Is it possible to get the any closer or is it limited? Seems like it is a little bit too far away. How much distance is it?
Thx in advance
Thanks for your comment Mettfisch. I’m not sure which piece of equipment you are reffering to, as you left this out of your question. However, the GT1-Evo is highly adjustable, so it is possible to change the position of every mounting point and bring the wheel, pedals, shifter and screen closer to you. Hope this answers your question. If not, please let me know. 👍
@@ADAPTNetwork ah..sorry.. the screen. Can you put it closer to the wheel?
No worries @@mettfisch2624. Yes, using the single screen holder, you can move the monitor a little closer to the wheel. As you can see from the video (11:30), I have room to move the screen about two inches closer. If that’s not enough though, I would recommend using a free-standing monitor mount. Hope that helps. 👍
I am looking to purchase this seat and was wondering if the seat slider is worth getting or not?
Thanks for your question Brady. In my opinion, if you’re the only person that will be using the rig, then there is no need to use seat sliders-you can simply bolt the seat in place to match your ideal driving position. However, if different people of different heights will be using the rig, then seat sliders would prove useful. Hope that helps. 👍
@@ADAPTNetwork thank you for your reply. It has helped a lot
No worries @@bradypollock037-glad I could help.
I am 6ft 5 would this work for me?
Thanks for your question Camber King
. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
what are all the components you have in your rig?
Thanks for your question Tony. In this video, I’m running the Thrustmaster TX wheel base, with Ferrari 458 Italia wheel; the Thrustmaster T3PA pedal set; and the Thrustmaster TH8A shifter.
Where to buy omg
Thanks for your comment Zeljko. It looks like the GT1 Evo is currently in stock directly from Sim-Lab ( sim-lab.eu ). Digital Motorsports should also have them back in stock soon as well ( adaptnet.work/GT1Evo ). Hope that helps. 👍
400 quid for some aluminium. I take it you have to buy the seat separately.
They also charge upwards of 500 quid for a seat when you can literally buy a real sparco car seat for less….
Thanks for your comment TopSelections. While you could probably source the aluminium profile slightly cheaper, the advantage of purchasing a kit like this is that everything comes pre-cut (with soft edges) to fit together perfectly. All of the hardware to assemble the rig is also included, along with some spares, and the bespoke wheel and pedal decks make it a lot easier to mount your equipment and fine-tune your driving position.
Currently, you can pick up the GT1 Evo from Digital Motorsports for about £330 (VAT included) ( adaptnet.work/GT1Evo ). At this price, I think the GT1 Evo is a great deal-especially, when compared to some other alumnium profile rigs like the new Next Level Racing F-GT Elite. You do have to purchase a seat separately, but this is also the case with most other aluminium profile cockpits. The great thing is that this rig will support almost any car seat you like, so you can start with a really cheap second hand one and upgrade down the line.
Hey dude, I'm looking into this for a Drifting rig, how would you mount both a handbrake as well as a shifter at the same time?
Great question Oren. You‘ll need to use two shifter and handbrake mounting brackets (one for the shifter and one for the handbrake). These are available from Sim-Lab, or you can fabricate your own. You might get away with mounting the handbrake directly behind the shifter on the side mount that comes with the GT1 Evo. However, depending on your equipment, it might be worth purchasing an extra mounting point from Sim-Lab, or some extra aluminium profile, to strengthen the side mount, or if you wanted to mount the handbrake and shifter side-by-side. Hope that helps mate. 👍
@@ADAPTNetwork Awesome dude thanks! its great that you're still responding to comments on a video 2 years later
Hello ! Can i mount the pedal plate without the uprights? I like the pedal plate flat and lower to the ground or maybe even down tilted a little bit in the front ,thanks
Great question Bobby. Yes, you can easily mount the pedal plate flat using the rig’s side rails instead of the uprights. 👍
@@ADAPTNetwork thanks a lot !
@@bratosin1 No worries mate-glad I could help.
Are there enough screws included to mount pedals, seat and wheelbase or do I need to plan them as extras?
Thanks for your question Tim. Yes, there are enough M6 screws included in the kit to mount your wheel, pedals, and shifter. I would, however, recommend picking up a pack of M6 washers to ensure a tight and secure connection to the frame. Extra M8 screws, to mount a seat, are also included with the seat brackets. Hope that helps. 👍
@@ADAPTNetwork OK thank you very much
No worries @@timschwim3335. Let me know how you get on with the new rig.
Does the Simlab GT1 EVO come with the equipment required to install the seat or does it need to be purchased separately?
Thanks for your question tyncam. In order to mount a seat, you need to purchase the additional side-mount seat brackets (5.28). These come with with the necessary bolts and can be picked up for around €39 EUR ( adaptnet.work/5zmE ). Hope that helps. 👍
@@ADAPTNetworkGreat - and thanks so much for the detailed review.
No worries @@tyncam24-I’m really glad you found my review useful. We’ll be publishing some new sim racing content over the next few weeks, so keep an eye open for that. See you on the virtual race track. 🏎🏁
@@ADAPTNetwork I just purchased a Simlab P1-X and was wondering if you knew how to mount the Thrustmaster T248 pedals on this model's pedal deck?
Thanks for your question @@dalemiller1441, sorry for the late reply. The T3PM pedals, that come with the T248 wheel, have a few different mounting points. Two mounting points at the back, underneath the throttle and clutch pedals (as with the T3PA pedals I use in this video), and three at the front. The Sim-Lab P1-X comes with two pieces of alumimium profile for the pedal deck, on which you can only mount select pedals directly (those which have bolt access from above). So, to mount the T3PM pedals, you’ll need to get the additional pedal slider baseplate ( adaptnet.work/6VLj ). I linked to Digital-Motorsports here, but you can also get the baseplate, with or without seat sliders and a heel rest, directly from Sim-Lab. You first need to mount your pedals to the baseplate, and then the baseplate to the aluminium profile. Hope that helps. 👍
Hate to bother you but could you give me the dimensions of the rig I need to know how long it is not worried about the wet the link?
No worries Stewrt. The GT1 Evo is 135 x 58cm (2:02). Depending on where you mount the seat though, the rig may be a bit longer. I bumped the seat forward (along with the wheel and pedals) to keep the footprint of the rig as small as possible. Hope that helps. 👍
@@ADAPTNetwork Well thank you very much there mate No I got to figure out how many feet it is thank you sir have a great day
No worries @@stewrtcullom7924-glad I could help. For reference (in feet and inches), the rig is about 4ft 5 inches long and 1ft 11 inches wide.
@@ADAPTNetwork Thank you so much I got plenty a room I built a platform a while back and it should fit perfect tomorrow I have a guy coming out putting my new TV on the wall Super cool 50 inch TV
This looks incredibly small. I'm worried I'll be too tall for it.
Thanks for your comment Dylan. The GT1 Evo is likely more than big enough for your height. It’s 135cm in length and, as you can see from the video (
2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
Was there any import duty/tax when it arrived in the UK?
Hi James, that's a great question. When I recieved the rig, there was no import duty/tax to pay. However, I think this may now have changed. I reached out to Richard from Sim-Lab for information on this and he said that Sim-Lab will be posting a blog post about this shortly. Keep an eye on the Sim-Lab website, but I'll also update this comment as soon as the post is published. Hope that helps. 👍
@@ADAPTNetwork Just to update you, Messaged pure sim who I’m getting the rig from they also said the think it’s duty/tax free, however I did have to pay £98 “government charges” which I guess is import tax/duty.
Thanks for the update @@JC21x. Yeah, that sounds like a VAT charge or something similar. I don't think Sim Lab has posted the blog post yet, but I'm keeping an eye out for it.
Update: Digital-Motorsports, which is based in Ireland, has now published a blog post about the new Brexit arrangements ( adaptnet.work/3WhT ). My understanding is that 20% VAT is applied when the shipment enters mainland UK. This will be charged to the buyer by the shipping company alongside a small handling fee (2.5% of the VAT and a minimum of £11.00).
what monitor are you using in this video?
Thanks for your question Kip. It's the Acer Predator X34. 👍
Does it come with a seat?
Thanks for your question Jojo. The GT1 Evo doesn’t come with a seat as standard. However, thanks to the rig’s flexibility, you can mount pretty much any type of car seat you want. Sim-Lab also offers a range of sport and bucket seats for you to choose from, including the sim racing specific Sim-Lab SPEED1 which I tested ( adaptnet.work/3GAg ).
Waiting for mine to arrive, do you think that with a Vesa adapter the monitor mount can fit VESA 75? Want to order one but my G5 only have vesa 75 😓
Thanks for your question TheDummies. For sure, an adapter should do the trick. The VESA mount that comes with the GT1 Evo single screen holder supports VESA patterns 100 x 100mm, 100 x 200mm and 200 x 200mm. So you’ll need an adapter that converts one of these patterns to 75 x 75mm. Hope that helps.👍
@@ADAPTNetwork thanks for the reply! I will go ahead and place the order already saw an adapter on Amazon! Thanks mate!
No worries @@Dummies05-glad I could help. See you on the virtual racetrack. 🏎🏁
@@ADAPTNetwork Does the GT1 EVO come with a 100x100 vesa Single monitor mount or it is bought separately?
Thanks for your question @@Abbbk35. The GT1 Evo single screen holder is sold separately ( adaptnet.work/6Mun ). It’s depth and height adjustable and mounts VESA patterns 100 x 100mm, 100 x 200mm and 200 x 200mm. 👍
Hey, how tall are you? Iam 210cm or 6/10 in feet and looking for a rig
Thanks for your question Wolf. The GT1 Evo is more than big enough for your height. It’s 135cm in length and, as you can see from the video (
2:02), I have the pedal deck uprights and the seat rails set three inches from the edges. Additionally, I have the seat set quite far forward on the seat rails-so there’s plenty of scope to extend the leg length. Depending on your build, however, you may need to opt for a larger seat like the Sim Lab SPEED1 XL. For reference, I'm about 5ft 9.5 inches (176.5cm) and average build. Hope that helps. 👍
@@ADAPTNetwork thank you that helps me a lot
No worries @@Wolf-vj9ej-glad I could help. Let me know which rig you decide to go for in the end.
Can I mount a gaming chair to the rig?
Thanks for your question V ι ƈ ƚ σ ɾ. I'm not sure about a gaming chair (it will depend on the mounting points), but you can mount pretty much any car seat you like to the GT1 Evo. If you have a side-mount seat, you can use the bucket seat brackets ( adaptnet.work/5zmE ). Otherwise, you can base-mount a seat directly to the seat rails using a seat slider ( adaptnet.work/7jG5 ). Hope that helps. 👍
What a waste. Put low end sim gear on a sim lab gt1 evo 🤣
Haha, for sure-the GT1 Evo is a beast and can handle most hardware you throw at it. In this video though, I wanted to illustrate the upgrade path that I think a lot of people will take (first upgrading the rig and then the hardware). I’m planning to make a follow up video with a direct drive wheel and load cell pedals in the near future. 👍
thats a really shit price
you could easily buy this for 200 bucks
Thanks for your comment Mika. You are right that you could probably source the aluminium profile slightly cheaper.
However, the advantage of purchasing a kit like this is that everything comes pre-cut (with soft edges) to fit together perfectly. All of the hardware to assemble the rig is also included, along with some spares, and the bespoke wheel and pedal decks make it a lot easier to mount your equipment and fine-tune your driving position.
In the end, I think there are advantages to either route. 👍
Where can you get this for that amount and wheel deck as well as the pedal deck? Very curious as nothing comes close to this in terms of value, fit and finish.
@@nicko5237 You will need to configure it yourself
if you want to i can send you some pictures
P.S a pedal deck is not necessary at all
So ugly, why would you like a box? That two posts for the wheelbase too distracting.
Haha, sure the GT1 Evo might not be as elegant as the new Next Level Racing F-GT Elite, but it's an excellent rig functionally in my opinion.
the screenholder is good? any flex or issues
Thanks for your question ex1t. In my opinion, the GT1 Evo single screen holder ( adaptnet.work/6Mun ) is the perfect option for running an ultrawide or one of the latest generation 49″ super ultrawides. I found that it performed flawlessly with my setup-securely holding my 34″ Acer X34 in place without any flex issues. Hope that helps. 👍
@@ADAPTNetwork thank you. Helps a lot
now i got my gt1 evo Rig with the screen holder...but the vibration from the base top the monitor is rly hard... I dont like it
Sorry to hear that @@_ex1t. Have you checked that the mounting bolts are fully tightened down?
@@ADAPTNetwork Yes, I tightened all the screws. unfortunately it vibrates too much. But ty