its over complicating a simple task that doesnt need a circuit to do also its drawing power 100% the time so its not efficient plus itll be dead long before the day is out
@@JasperJamesJAndo I would suggest a Google search for schematics involving large solar tracking circuits/mechanism. There are tons of diy projects using them. Good luck my friend.
I know I'm late to the party but... where's the overcharge protection? You're trying to charge a lithium cell to near 5v but one should never overcharge a lithium cell. 4.2v is tops for a lithium charger. Highly likely that this thong will go up in flames one day.
You should have given a 1N4007 diode to the solar panel and connect the battery to the cathode of the diode (Anode to the solar panel so that cathode acts as the output)so that the current from the battery doesn't flow to the solar panel because it causes the solar panek to heat.
It would help if you can give direct links to the project parts used in this demo. Is there a kit with all of these parts assembled available online for purchase. @@TechIdeasAG
It would help if you can give direct links to the project parts used in this demo. Is there a kit with all of these parts assembled available online for purchase.
its over complicating a simple task that doesnt need a circuit to do also its drawing power 100% the time so its not efficient plus itll be dead long before the day is out
Working Successfully 💯❤
Where you can put a led for the night
From the battery
And will it only light up at night?
@@dj_sorra8605Will have to add a photo electric diode on one of the led wires, I imagine.
Wouldn't it make more sense to put the circuit under the panel or in a box and just run wire to the motor and panel while PROTECTING THE CIRCUIT?
Can i use Tda 2822 m
how we can we apply it at big solar panels?
This for small loads like that motor. You could however use a relay board that uses optocouplers to turn a larger motor. More power tho.
@@TheTubejunky very late answer..... ok...
@@TheTubejunky can i apply it to a 100 watts solar panel and 21 volt motor?? please replsy ASAP we need it in our thesis this semester
@@JasperJamesJAndo I would suggest a Google search for schematics involving large solar tracking circuits/mechanism. There are tons of diy projects using them. Good luck my friend.
Good idea but: How will you prevent the motor from constantly drawing current? In your circuit, the motor draws current continuously.
Will the battery charge??
What is the output efficiency?
👍
Can i use this same circuit with a 12v battery and 12v dc motor?
Awesome and useful project, thanks for sharing your knowledge and experience. Salutes from Texas USA.
Motor ratings Mr?
Very nice project ❤
Bro I made it but it is not working only resistors are getting hot... Nothing will happen else
Check resistor value and ic orientation
Hi bro I am going to implement it is it. Working or not pls reply
@@mohinmohin496 not working at all
Thank you so much bro you saved my money
Can i connect 7.5v solar panel
Yes
TDA2822A link please
I know I'm late to the party but... where's the overcharge protection? You're trying to charge a lithium cell to near 5v but one should never overcharge a lithium cell. 4.2v is tops for a lithium charger. Highly likely that this thong will go up in flames one day.
This is great!
THANKS
Круто!
👍
Hello please share us the names of all item
Please bro I have to make for project
Que chulada
Superb ❤
Thanks brother 🙏🏻
Can you please give a clear list of the materials used 🙏
why motter always keeps spinning?
You should have given a 1N4007 diode to the solar panel and connect the battery to the cathode of the diode (Anode to the solar panel so that cathode acts as the output)so that the current from the battery doesn't flow to the solar panel because it causes the solar panek to heat.
I noticed that he had the diode in the circuit he showed, but didn't implement it himself.
This doesn't work,report the channel
Might be a cool project. It helps if you provide a narrative.
Hello bro mai banaya hu but work nhi kar rha hai bas heat hoke rah jata h
nice project👋👋
Aisa kyu ho rha hai plz reply do bhai😢
Can i use 12v dc motor and 9v Battery
Sir motor nahi chalta
Hamko ic 2822 nhi mil rha hai
Bhaiya agar aapko pta hai to please bta do yarr
Please bhaiya
TDA2822M
Why use a battery? The panel produces power.
Not enough for motor rotation.
@@deniszhuravlev9874 Add a couple more panels? Maybe charge some caps from the panels to power the motors?
👍👍👍
brilliant
Bro i'ev done it but its not working😢
Yes I have this problem
Will the battery get charged
Test
Will it charge the battery
Connect a 1N4007 diode to the solar panel so as to prevent backflow of current from the battery
Very perfect
What is th price this kits
380
Good
Thanks bro !!!
Wiring diagram share me
Given in the video
I really like this project and would like to know where can I order the parts? I dont have much time pls let me know soon.
Amazon.in
It would help if you can give direct links to the project parts used in this demo. Is there a kit with all of these parts assembled available online for purchase. @@TechIdeasAG
simple and beautiful!!!
Cool
It would help if you can give direct links to the project parts used in this demo. Is there a kit with all of these parts assembled available online for purchase.