How To Make A Spot Welding Machine Simple Low Cost || DIY Cell PIN Welding Machine
Вставка
- Опубліковано 11 гру 2022
- Hello friends
Today I will show you how to make a simple, cheap spot welder that is very easy to do, the tools to make a spot welder include .
---------------------------------------------------
1. Old micro oven transformer 800wb
2. 2x 10 mm copper wire, you can use single 16 mm wire
3. Time current controller board , etc.
4. 12v transformer
Thanks for watching . - Навчання та стиль
PERFECT !
Good Job 😍
What size of nickel sheet did you use? Can it does weld 0.15mm?
Nice video
Wow nice
thank pro
thanks verry good , but i have question dear u use nickel sheet 0.12 ?
Neckel sheet 0.15 m ?
The main voltage of each transformer should be fused!
Mereko buy karna hain apki welding machine
Bhai controller kaha milega
What the thickness of wire for winding
copper cable M50 Length 2 meters
Xin link mua phụ kiện về làm
trong mô tả video đó bạn
Let me guess, nickel plated steel....
It should be mandatory that all batteries are made with pure nickel or some kind of nickel copper alloy.
Available
Why did you not rip it off from minus?
what are you separating?
What size is the copper wire
9mm
what size is the case
265×185×95
What is size the plastic box ?
265×185×95
Hello. I am also collecting the materials to make. I'm thinking of using a 25mm2 cable, but I'm confused about the amperage value. In some videos they used 35mm2 cable. The copper part of 25mm2 cables is 6.8mm. I think this is not enough. When you peel off the outer shell and fold the cable in half, the copper part becomes 13.6 mm. Do you think this is enough?
The cable I use is 50mm, 35 is too small to solder
Yes is enough. Usually the hole of microwave transformers is 35x17mm. For exampel I used a 120mm2 (The copper is 15mm of diameter, I peeled it and I used a thin teflon isulation)
YT has the worst music videos.