You have such a great teaching skills the way you're explaining things make us more engaged, concentrate, and the explanation are simple and clean thanks anyway for sharing your knowledge with us really appreciate
Well explained. You did not go off track you keeped to setup to the end. Other youtube channels start talking about all different things and get confused. There are so many people like me just want a slow step by step talk through with some reasons and bit of information through the set up process. A1 information top marks 👍👍👍👍👍👍👍👍👍👍👍👍👍
Very good explanation... Really nice.. I have total 5ports PoE switch with one uplink port... One cable connected from Modem to uplink port of PoE.... NVR is connected to one port of PoE switch...also 2cameras are connected in the PoE switch...is it correct sir.. Can you put a video on PoE switch Function and how does the data's are transferred... Thanks a lot for your video...God Bless,,👍👍👍
Hello Jeyapandian, The connection you explained will work as you are using just 2 cameras but when using about 10 or more cameras, this method will not work. The best way out is to connect the NVR to the modem and maintain all the other connections as you have connected. That will make the network more efficient. I will consider doing another video on POE Switch as requested. Thank you for watching, God bless you too.
@@Tech_Inside_Out 🙏 thank you vary much sharing the knowledge.... Sir I want know that how can I install and configure the distance recording what are the h/W and software protocols we need. Ex , my office at away from 20 km and I want to do keep recorder NVR or other at my home.
This channel is precious, already subscribed. Sir I want to ask how do all IP cameras be able to access the internet and provide remote access when your internet router is not connected to a modem or fiber cable from your ISP through the blue colour WAN/Internet port of the router? This is the only part that I don't get it. Thanks!
1. My router contains a SIM card through which i receive Internet into the router. 2. Since the router is connected to the network switch and the cameras are also connected to the switch, they will receive the Internet which is shared on the switch. Am preparing a new video that will explain how all these happens, ie Switches and router connections and how they function.
@@Tech_Inside_Out I see, but why SIM card connection is chosen in such scenario? Cellular data has limited usage, expensive and the internet connection is unstable when being interfered by bad weather such as rain. Would you suggest to use ISP modem subscription with an actual optic fiber running into an office for internet connectivity?
@@johnsonjohnson129 that sounds more expensive and would take a longer process. I believe he's just using what's best for him. Remember this is also a tutorial
The NVR should not necessarily be a POE NVR. What i used in this Video is a non POE NVR. I used Cat 6 network cables in this very demonstration but Cat 5 cables also work perfectly.
Hello, 1. The two uplink ports help in connecting two switches together, whiles connecting one to an NVR. This video might provide much information. ua-cam.com/video/t9hvFJgnDjU/v-deo.html 2. One uplink port is enough to carry all 4 ports.
Using the Uplink port rather has advantages over using the normal POE ports. The Uplink port has been designed to handle a higher bandwidth than the normal ports and so in larger camera networks, the best place to connect a router is the Uplink port
Having a 8chPoe nvr and 7 Poe cam connected. Want to connect 1 non Poe cam to the poenvr. Would I need a Poe switch for connecting one nonpoe to the Poe nvr pls? Or there’s a way to beat it.
You need a POE splitter connected to that 8th port to split the signal coming from the NVR into video and power. The video is the RJ45 end and the power goes into the ethernet jack of the camera and you are sorted. As mentioned, i will do a video explaining all these.
hi, can you explain the camera it is working till i have broadband internet, once i unplug cable from computer, it stop revording, not even letting view video on my phone, or if plug still in computer, but turn off broadband router, it stopped working camera, so camera will work only if i have broadband internet? without internet - i need NVR box recoder correct? any explanation will help me, i want instal in my car on the roof. with second battery. thank you
IP Cameras do not require internet to work, there might be a break in your network some where that might have caused the problem. You need the NVR to do the recording unless you would like to record using your computer which is also possible. Please contact me if the problem persist. benedict.gborgblorvor@gmail.com
The Uplink port of the POE switch has been optimised to deliver at a higher bandwidth than the POE ports and that facilities ease of video transfer or transmission. That will mean that there will be much path for video flow with no breaks.
You can do, provided you are able to position a switch at a distance within 100m from the cameras. You can watch my video on how to link multiple cameras to an NVR, it shows how it can be done
Very very possible. Wherever you are in the world, you can see your house. Am currently working on a video in which i will show how you can even see multiple locations at another location
Thanks for your question, this video shows every process. There are processes that need to be shortened, for example the long boot time of the NVR which does not contain any instruction and hence you will not miss any information It really covers every detail. In case there is a particular point that is not too clear, please let me know so i can provide precise answers. Thank very much for contacting Tech Inside Out.
@@Tech_Inside_Out I understood thank you ... At First I thought the DVR must be connected to a computer then to a monitor while the DVR works as the CPU itself
The POE switch is made an intelligent device to know when to supply power so that since the router does not require power from the POE Switch, the switch will not output power.
POE is Power Over Ethernet. I have created 2 other videos that give further explanation to POE. Please see the video links below ua-cam.com/video/HXsTwFgkkDc/v-deo.html ua-cam.com/video/pBkdo4yIBps/v-deo.html
You have such a great teaching skills the way you're explaining things make us more engaged, concentrate, and the explanation are simple and clean thanks anyway for sharing your knowledge with us really appreciate
I give God the Glory for wisdom. Thanks so much for watching
Well explained. You did not go off track you keeped to setup to the end. Other youtube channels start talking about all different things and get confused.
There are so many people like me just want a slow step by step talk through with some reasons and bit of information through the set up process.
A1 information top marks 👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you
Nice presentation. I've been following your videos in order to learn how to install CCTV cameras.
Thanks for the compliment. Expect more videos in the coming days.
I am really enjoying it may God bless you for sharing your knowledge with us
God bless you too. There is more on my channel at www.youtube.com/@Tech_inside_out
Can I get your contact Sir. Thanks
I enjoy your videos very simple and easy to understand.keep on
Thank you
hi..thank you for sharing this video..just want to ask if the router will have wifi signal to connect other devices
Yes, the router will still have WiFi signal for connecting other devices
Thank you brother Benedict
You are welcome. There is more when you visit our channel, www.youtube.com/@Tech_inside_out
@@Tech_Inside_Out2:52
Really clear video Thanks for share
Most welcome
Very good explanation... Really nice..
I have total 5ports PoE switch with one uplink port... One cable connected from Modem to uplink port of PoE....
NVR is connected to one port of PoE switch...also 2cameras are connected in the PoE switch...is it correct sir..
Can you put a video on PoE switch
Function and how does the data's are transferred... Thanks a lot for your video...God Bless,,👍👍👍
Hello Jeyapandian, The connection you explained will work as you are using just 2 cameras but when using about 10 or more cameras, this method will not work. The best way out is to connect the NVR to the modem and maintain all the other connections as you have connected. That will make the network more efficient.
I will consider doing another video on POE Switch as requested.
Thank you for watching, God bless you too.
@@Tech_Inside_Out
Regards👍👍👍
Great job thanks for helpful videos .
Most welcome Sir. Please visit our channel at www.youtube.com/@Tech_inside_out
Thank you...which type of cable are being used...? 1 Straight, 2 cross. 3 over, roll over???
Straight through cables
@@Tech_Inside_Out 🙏 thank you vary much sharing the knowledge....
Sir I want know that how can I install and configure the distance recording what are the h/W and software protocols we need.
Ex , my office at away from 20 km and I want to do keep recorder NVR or other at my home.
Thank you so much❤
Most welcome
Thanks for your information. Very nice
You are welcome
great tutorial, thank you for this.
Thank you for appreciating it and thanks so much for watching.
Great explanation and nice video 👏 👏 👏
Thank you
Thanks for the video!
You're welcome
Am about to install for the first time a poe powered ip camera's, are they stable and can power the camera well?
Yes. very stable, reliable and simple
You are wonderful
I thank God
Thanks I really appreciate
Thank you
Concise and on point
Thanks very much
This channel is precious, already subscribed. Sir I want to ask how do all IP cameras be able to access the internet and provide remote access when your internet router is not connected to a modem or fiber cable from your ISP through the blue colour WAN/Internet port of the router? This is the only part that I don't get it. Thanks!
1. My router contains a SIM card through which i receive Internet into the router.
2. Since the router is connected to the network switch and the cameras are also connected to the switch, they will receive the Internet which is shared on the switch.
Am preparing a new video that will explain how all these happens, ie Switches and router connections and how they function.
@@Tech_Inside_Out I see, but why SIM card connection is chosen in such scenario? Cellular data has limited usage, expensive and the internet connection is unstable when being interfered by bad weather such as rain. Would you suggest to use ISP modem subscription with an actual optic fiber running into an office for internet connectivity?
@@johnsonjohnson129 that sounds more expensive and would take a longer process. I believe he's just using what's best for him. Remember this is also a tutorial
Very informative. Gracias. 👍
Glad it was helpful! Expect more informative videos.
Hi, pls must the NVR be a Poe NVR as well?? And What type of network cable do you use for your installation? cat5 or cat6… thanks
The NVR should not necessarily be a POE NVR. What i used in this Video is a non POE NVR. I used Cat 6 network cables in this very demonstration but Cat 5 cables also work perfectly.
@@Tech_Inside_Out I appreciate your reply Thanks.. looking forward to more videos from you
Hi Im quite confuse why are there two uplinks? cant a single uplink be enough to carry the 4 ports? please enlighten me thank you
Hello,
1. The two uplink ports help in connecting two switches together, whiles connecting one to an NVR.
This video might provide much information. ua-cam.com/video/t9hvFJgnDjU/v-deo.html
2. One uplink port is enough to carry all 4 ports.
I have a single ICSEE camera which I want to directly connect to my Hikvision Turbo HD DVR. How can I do that?
Please use this video as a guide ua-cam.com/video/UrWgV1F7JFs/v-deo.html
Hello, so if we connect router to uplink port, it will work totally fine? What is adventage of connecting it in poe port instead to uplink port?
Using the Uplink port rather has advantages over using the normal POE ports.
The Uplink port has been designed to handle a higher bandwidth than the normal ports and so in larger camera networks, the best place to connect a router is the Uplink port
Thank you for the question. I found this when Iam searching for a answer for this question.
Having a 8chPoe nvr and 7 Poe cam connected. Want to connect 1 non Poe cam to the poenvr. Would I need a Poe switch for connecting one nonpoe to the Poe nvr pls? Or there’s a way to beat it.
You need a POE splitter connected to that 8th port to split the signal coming from the NVR into video and power. The video is the RJ45 end and the power goes into the ethernet jack of the camera and you are sorted. As mentioned, i will do a video explaining all these.
@@Tech_Inside_Out pls have you done a video explaining this as you said?
@SwaggStreet Inc Please which one are you referring to. I don't quite get the exact promise you are referring
referring to
hi, can you explain the camera it is working till i have broadband internet, once i unplug cable from computer, it stop revording, not even letting view video on my phone, or if plug still in computer, but turn off broadband router, it stopped working camera, so camera will work only if i have broadband internet? without internet - i need NVR box recoder correct? any explanation will help me, i want instal in my car on the roof. with second battery.
thank you
IP Cameras do not require internet to work, there might be a break in your network some where that might have caused the problem.
You need the NVR to do the recording unless you would like to record using your computer which is also possible.
Please contact me if the problem persist. benedict.gborgblorvor@gmail.com
Good job
Thanks
sir why didnt you put the ethernet cable from the router on poe ports insted of lan port?.
The Uplink port of the POE switch has been optimised to deliver at a higher bandwidth than the POE ports and that facilities ease of video transfer or transmission. That will mean that there will be much path for video flow with no breaks.
You are one of the best!!👏👏
We thank God. Am glad it was helpful.
What is the use of the third terminal of the IP camera
Its for audio connection from the camera out to other devices.
Can we connect the router to the uplink port of Poe switch instead?
That is recommended especially when using higher number of cameras since it delivers a higher bandwidth.
Can you make another video on how to connect multiple switches from access layer to core layer? Thanks
THANKS
You are most welcome,
There is more on our channel www.youtube.com/@Tech_inside_out
We do appreciate your time on our channel.
Can I use ip camera for a distance more than 100m pls
You can do, provided you are able to position a switch at a distance within 100m from the cameras. You can watch my video on how to link multiple cameras to an NVR, it shows how it can be done
Good
Thank you
Thank you Sir for the great work done. Can i get your contact? Thanks
Thanks very much
020 704 1650
Is it possible for me to view what is happening in my home in Uganda when I am in Australia in my phone by help of CCTV camera
Very very possible. Wherever you are in the world, you can see your house. Am currently working on a video in which i will show how you can even see multiple locations at another location
If you have a house at Uganda, one at Australia, hou can see all of them at once from say in USA or wherever you find your self
How can I add a coax camera to this?
Cameras that connect by Coax are analogue and can not be connected to digital systems.
So all CCTV cameras have to be replaced? @@Tech_Inside_Out
@schwamieboy1 It depends on what you want to do and your financial capability.
I have 4 analog cameras that I want to add to my new 8 channel NVr which comes with 4 IP cameras. Do you have a tutorial on this? @@Tech_Inside_Out
How do I know non pie camera from pod camera
It is stated on the Camera
nice but you only boot up and you're in the switch system.......... How do you get there?
Thanks for your question, this video shows every process. There are processes that need to be shortened, for example the long boot time of the NVR which does not contain any instruction and hence you will not miss any information It really covers every detail.
In case there is a particular point that is not too clear, please let me know so i can provide precise answers. Thank very much for contacting Tech Inside Out.
@@Tech_Inside_Out I understood thank you ... At First I thought the DVR must be connected to a computer then to a monitor while the DVR works as the CPU itself
Thx
Most welcome. There is more when you visit our channel, www.youtube.com/@Tech_inside_out
My biggest challenge has understanding Splitter, Adapters, Extenders
I will try and put something together along those lines
@@Tech_Inside_Out Thank you very much sir
What happen router connect to poe?because poe power 48v
The POE switch is made an intelligent device to know when to supply power so that since the router does not require power from the POE Switch, the switch will not output power.
Awesome
Thank you
What is tge meaning if POE?
POE is Power Over Ethernet. I have created 2 other videos that give further explanation to POE. Please see the video links below
ua-cam.com/video/HXsTwFgkkDc/v-deo.html
ua-cam.com/video/pBkdo4yIBps/v-deo.html
❤
Thank you
That's brief explanation
Thank you.
what's the name of the application used to set up the cameras on the monitor?
For the monitor, if i get you right there is no software required to display the cameras on the monitor. For display on computers, you require a VMS.
Very helpful, can I please have your contact?
Hello Kwame,
Thanks for your compliment.
Please check your email.
$
Thanks