Art your rebuild kit brought my dads old 11-48 12ga back to life. I also bought a 16 ga kit for my 11-48. I have it broken down completely for install and cleaning as I write this. Dads not going to believe it when I tell him I got it working. He had taken it to several gunsmiths and they couldn’t get it cycling. I don’t think they had a clue about the action spring in the stock. Great video.
As usual, you make it all so easy to understand. I’m currently shopping for a 11-48 or 48 in 16 gauge. Right out of the gate, I’ll order one of your kits and get things off to a good start.
Thanks for the vid. Just installed one of these kits. From the vid, am I correct to assume that the two-piece construction that sits atop the recoil spring-as that is what I have-is preferable to the one-piece construction that comes with the kit?
I picked up an 11-48 in 16 ga that is leaving a slight dished impression of the bolt face on the brass shell casing. I also noticed that although it is firing and cycling, it seems to be shooting at a reduced velocity. I can bust clays with it but it's useless for hunting. Everything that I've shot with it has flown away like nothing ever happened. I did a water bottle test at 15 yds comparing the 16 ga 1⅛ oz #7½ with a 20 ga ⅞ oz #7½ and a 12 ga 1⅛ #7½ . The 20 ga and 12 ga both exploded the water bottle but the 16 ga only penetrated the front and only knocked the bottle over. Something ain't right with this gun. Any ideas?
Art, I have several Safari Mk II rifles from 243 to 338, What recommendations can you offer in regards to making them more accurate? They are good now, but I would like to tighten them up, already have worked up loads for all of them. What tips can you suggest, that will tighten those groups?
Thanks man I will be ordering a kit off yall in the future, just got passed down a 12 gauge 11-48 from my late grandpa(papa). I was wandering, what screw can we use for the end of the forend to install a sling?? Please help or post video thank u
I have a 16ga 11-48 that cycles rounds BUT every fired hull has the base of the shell dished in from recoil. Is that normal? I've been told it's common for those barrel recoil to do that. I'm not so sure that's right. What do you think. I reload 16ga so every hull is precious.
I just picked one up in 16 ga thats doing the exact same thing. I also noticed that it seems to be lacking in velocity. I can bust clays all day long but it wont even kill a bird at 25 yards.
That last friction ring arrangement seems to be the same as on my 1930 Remington Model 11 20 gauge. Put one piece at the bottom of the recoil spring against the receiver for which ever load setting (I forget which) and vice versa for the other. You also have to put the bevel on the one piece in the right position in relation to the other. I'm paraphrasing here from memory. I always thought that when Remington came out with the 48 series that would handle all loads with out having to change the position of the friction ring etc that was supposed to be an improvement. From what I see here it sounds like the old system was better if not more convenient. Am I missing something? From what I've read previously and I think have seen on your older videos regarding the American Browning, it is always better to have them set for heavy loads IF they will cycle light loads on the heavy setting. Thanks for the video.
I own about every gauge but the 20_ infect 2 in 28 ga. Which is my.favorite small bore to hunt small game. They shoot light but hit like a 12ga. Imp mod and modified My grand pops sportsman.kicks like a muie. It has always kicked hard from new.12ga. 30" full pop put a rubber butt pad ,, didn't help.guess it needs the springs. N rings.one question why did they make the 1100 in 410 that weighs more then my 1100 12 GA trap.
YEAH I'MA 55YEAROLD SHOTGUN LOVER TOO HAVE BEEN SENSE DAY 1 OF MY LIFE "FIELD&STREAMS" "CANFIELD'S&CABELA'S" KID NOTHING LIKE WALKS IN THE WOODS WITH YOUR FATER AKA "DAD" YOU KNOW LOVE YOUR VIDEOS I MAY HAVE TO HAVE YOUR CONTACT INFO BUSINESS #.👍🏿🥂👑✊🏿☝🏿✌🏿💯🙏🏿💯
We want more ! So nice to see a man who knows what he's doin.
Where do we get the spring kit ?
I ordered this kit from Arts shop, had everything I needed to get my 11-48 sportsmen 12 gauge back up to working order.. thank you Art & Crew!
This is the most helpful and informative 11-48 video I have found. Thank you!
Nice to see another video from you all, just don't stop, keep them coming.
Art your rebuild kit brought my dads old 11-48 12ga back to life. I also bought a 16 ga kit for my 11-48. I have it broken down completely for install and cleaning as I write this. Dads not going to believe it when I tell him I got it working. He had taken it to several gunsmiths and they couldn’t get it cycling. I don’t think they had a clue about the action spring in the stock. Great video.
Been missing you,,glad you are back,,or glad I found you again…..
As usual, you make it all so easy to understand. I’m currently shopping for a 11-48 or 48 in 16 gauge. Right out of the gate, I’ll order one of your kits and get things off to a good start.
Love your videos… please keep them coming!
Glad to see another video back! Keep it up!
Great to see a Model 11-48 rebuild kit from you guys!
You guys are the best!! Still enjoying the beauty of the Brownings you restored and I purchased.
Glad to see you back, sir!
Nice to see another video. Please keep them coming! We love them!
Glad to see new video! Informative and entertaining as always
Thanks for the great video, keep the content coming
How do we order this spring kit.
Glad to see you back
thanks for the vid. Stay safe, stay armed, stay free.
Thanks just bought one glad mines still solid
He’s back!
Another excellent video.
I ove you men and your work the best...
I have a 16 ga which looks very clean and shot little. would i need a kit?
My dad used a magnet from the snapon dealer to get the stock bolts and washers out i use a small three way grabber to out them back in
How about a remington model 1100 video. Y'all are great. Keep up the videos.
Can yall please do a video on the 1100 if you have time. Love the videos thanks
Thanks for the vid. Just installed one of these kits. From the vid, am I correct to assume that the two-piece construction that sits atop the recoil spring-as that is what I have-is preferable to the one-piece construction that comes with the kit?
I picked up an 11-48 in 16 ga that is leaving a slight dished impression of the bolt face on the brass shell casing. I also noticed that although it is firing and cycling, it seems to be shooting at a reduced velocity. I can bust clays with it but it's useless for hunting. Everything that I've shot with it has flown away like nothing ever happened. I did a water bottle test at 15 yds comparing the 16 ga 1⅛ oz #7½ with a 20 ga ⅞ oz #7½ and a 12 ga 1⅛ #7½ . The 20 ga and 12 ga both exploded the water bottle but the 16 ga only penetrated the front and only knocked the bottle over. Something ain't right with this gun. Any ideas?
Art, I have several Safari Mk II rifles from 243 to 338, What recommendations can you offer in regards to making them more accurate? They are good now, but I would like to tighten them up, already have worked up loads for all of them. What tips can you suggest, that will tighten those groups?
Were can you buy the rebuild kit spring . And will it work with the 48 skeet 12 gauge. Great video!
Thanks man I will be ordering a kit off yall in the future, just got passed down a 12 gauge 11-48 from my late grandpa(papa). I was wandering, what screw can we use for the end of the forend to install a sling?? Please help or post video thank u
I have a 16ga 11-48 that cycles rounds BUT every fired hull has the base of the shell dished in from recoil. Is that normal? I've been told it's common for those barrel recoil to do that. I'm not so sure that's right. What do you think. I reload 16ga so every hull is precious.
I just picked one up in 16 ga thats doing the exact same thing. I also noticed that it seems to be lacking in velocity. I can bust clays all day long but it wont even kill a bird at 25 yards.
I’m looking for information on removing the Carrier latch assembly. How do you remove the pin that holds it in place?
Thanks for posting again! I just bought a 16 gauge A5 kit. Great kit and still great price!
Great video.
I learned a lot thank you great info/ I have 28 ga.will you be making springs for that ?also 410
That last friction ring arrangement seems to be the same as on my 1930 Remington Model 11 20 gauge. Put one piece at the bottom of the recoil spring against the receiver for which ever load setting (I forget which) and vice versa for the other. You also have to put the bevel on the one piece in the right position in relation to the other. I'm paraphrasing here from memory. I always thought that when Remington came out with the 48 series that would handle all loads with out having to change the position of the friction ring etc that was supposed to be an improvement. From what I see here it sounds like the old system was better if not more convenient. Am I missing something? From what I've read previously and I think have seen on your older videos regarding the American Browning, it is always better to have them set for heavy loads IF they will cycle light loads on the heavy setting. Thanks for the video.
Do you have a video on the Winchester Model 50?
where that old shotgun went I have noidea :( it was as tall as I was and the thing laid a pretty tight patern at 50 yards
I line up the shell stopper with the trigger assembly and then slide both into the receiver. Works better that way I feel anyways
Will you have spring kits for 11-48, 28s and 410s?
Great video.....where are you located????
Bloke du u carry front fore grip model 11 remington
How do I buy one of these kits? I don’t see them on yalls website
thanks ART !! from the " will a 20 ga barrel work on a 16 ga frame " guy..
I own about every gauge but the 20_ infect 2 in 28 ga. Which is my.favorite small bore to hunt small game. They shoot light but hit like a 12ga. Imp mod and modified My grand pops sportsman.kicks like a muie. It has always kicked hard from new.12ga. 30" full pop put a rubber butt pad ,, didn't help.guess it needs the springs. N rings.one question why did they make the 1100 in 410 that weighs more then my 1100 12 GA trap.
How do I get a spring kit for a 16 gauge? Do you sell them?
Do you have a kit for sportsman auto 12?
Need to sent them my 11-48 28 ga it’s needs some of arts love
Can yall reupload the BAR troubleshooting vids
How do I order one of these kits for my 12ga 11-48?
Excellent!
Thanks sir
Art, I need a kit for my 11-48 16 gauge. How do I order?
Where do you order the kit from?
Hello. Do you offer a kit for a 28 gauge? Thank you.
how can i buy a kit for my old 11-48
Any clue where to source an new stock for a 11-48 12 gauge?
Not new, but there are a few available on the Bay.
Hi,
Where would get a rebuild kit for a Model 48 ?
Thats
The Sportsman 48 is just like the 11-48 with the exception of the crimps in the magazine tube that limit it to three shells.
Where can I buy this kit?
Does anyone know where I can buy a bolt sleeve for Browning BAR type I cal. 30-06 ?
How do I order this kit?
I have an 11-48 12 gauge that I’d like to replace the springs, can anyone give me the website for this gentleman?
I HAVE A 16 GA 1148 I JUST GOT ID LIKE TO GET A KIT FOR HOW DO I GET IN CONTACT WITH YOU ????
More Videos!!
Saludos tienen piesas de remington modelo 11,48 calibre 20 y 12
👍😎👍
I’m need same parts we can order
Try putting camera in front, hands are blocking a lot of the time.
No puedo hacer ningún comentario porque NO ENTIENDO !!!NADA!!!
YEAH I'MA 55YEAROLD SHOTGUN LOVER TOO HAVE BEEN SENSE DAY 1 OF MY LIFE "FIELD&STREAMS" "CANFIELD'S&CABELA'S" KID NOTHING LIKE WALKS IN THE WOODS WITH YOUR FATER AKA "DAD" YOU KNOW LOVE YOUR VIDEOS I MAY HAVE TO HAVE YOUR CONTACT INFO BUSINESS #.👍🏿🥂👑✊🏿☝🏿✌🏿💯🙏🏿💯