Toyota RAV4 (2019-2023): Fog Light DRL LED Turn Signals / Marker Lights Installation.
Вставка
- Опубліковано 25 січ 2020
- In this video, we will do the installation of additional Sequential Turn Signals / Marker Lights LED Lamps in the 2019 Toyota RAV4 Trail / Adventure. The panels with these new LEDs are installed in place of decorative panels around fog lights.
PRODUCT LINKS:
1. Fog Light Daytime Running Light DRL LED Day Light 2Pcs For Toyota RAV4 Adventure 2019 2020 2021 2022 2023 - cartrimhome.com/DRL-Toyota-RA....
2. 3 Pin Connector Waterproof Connector, Male and Female, 16 AWG Wire Suitable for car Truck, Boat and Other Wire Connection (5 kit) - amzn.to/44Jv7FT.
Toyota RAV4 Non-Adventure Trims Daytime Running Light - cartrimhome.com/New-style-DRL....
Cartrimhome | 2019-2024 Toyota RAV4 Accessories -
cartrimhome.com/Toyota-rav4-2....
Toyota RAV4 (2019-2024): DIY Playlist - • Toyota RAV4 (2019-2024... .
Thank you for watching! Please support us by liking the video and subscribing to the channel!
You can also buy us a coffee! :) - www.paypal.com/cgi-bin/webscr....
Follow Us On Instagram - / morozovautomotive .
DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a small commission. Affiliate programs and affiliations include, but are not limited to, the Amazon Associates Program.
#MorozovAutomotive #2019RAV4 #2020RAV4 #2021RAV4 #2022RAV4 #2023RAV4 - Авто та транспорт
PRODUCT LINKS:
1. Fog Light Daytime Running Light DRL LED Day Light 2Pcs For Toyota RAV4 Adventure 2019 2020 2021 2022 2023 - cartrimhome.com/DRL-Toyota-RAV4-Adventure-2019?tracking=morozov_automotive.
2. 3 Pin Connector Waterproof Connector, Male and Female, 16 AWG Wire Suitable for car Truck, Boat and Other Wire Connection (5 kit) - amzn.to/44Jv7FT.
Hi Sir, let me just ask you what about the Side marker lights of your Toyota Rav4 (2019-2020) did you change it for Led Lighting? and if you change it what brand and specs for that Side marker of your Led lighting did you put on it?
Love your channel about customizing the RAV 4 trail or adventure!
That is a worthwhile upgrade. Looks Top!
Looks awesome 👌
looks nice
😍 I MUST DO THIS TO MY 💙 19’ LUNA 🪨
работа хорошая!
👍👍👍
Please do the hydraulic opener for the engine cap!
Do you know where to place the recorder on the window? There are black spots make it difficukt to vaccum
Does anybody know any other videos that show how to install this product? Would be nice to see another perspective. I’ve searched all over and this is the only video I’ve found
Nope I have no clue. This video doesn’t show anything with the wiring or what’s connecting to what… there’s no forums on it or anything at all
excellent video, but can I get something similar for my 2016 RAV4
Not that I have the vehicle, but one could one replace a NON-fog light blank filler piece with this piece (just dont punch out the cutout for the light) and still have the light and marker setup?
do you have amber instead of white ? like solid amber running light then scrolls when the blinker is on ?
Hi Sir, let me just ask you what about the Side marker lights of your Toyota Rav4 (2019-2020) did you change it for Led Lighting? and if you change it what brand and specs for that Side marker of your Led lighting did you put on it?
I bought a switchback led for my rav4 but my rav4 has only two wires in the turn signal. it is only single filament. do you know what is the solution?
Where is the white wire after you replace it?
I am looking for the headlights that do this.
Very nice, how can I get 1 pair?
I have the same kit and will be installing soon. Did you document exactly which wires you tapped off from the factory headlight harness for the installation?
I was wondering the same thing.Did you figure it out?
@@ni4nijustice855 I haven't yet. Life got busy. I'd love a color coded diagram of anyone comes up with one.
Anyone figure it out?
Would you be able to show how you soldered the wire? I really want to install this in my Rav4.
Unfortunately it is not possible to show the soldering of that particular connection- very tight space to place the camera. And if I do that again I would tap wires and do T-splitter for each wire. There is a sample: 26:40, ua-cam.com/video/5Jdyv_VOkV4/v-deo.html
Как я понял вы русские. Сделайте тогда может субтитры на русском. Очень нравится ваше творчество. Удачи.
Спасибо! Тойота РАВ4 (2019-2020) - Установка Дополнительных LED Поворотников / Габаритов - ua-cam.com/video/vn0bvJeOgKI/v-deo.html.
Да. Спасибо. Я просто не смотрел все ваши видео. Потом нашел. Только в России птф не такие.
If you didn't have that connector as shown at 5:08 ; to what then you would have connected the white cable to? We know yellow is turn signal, black is ground, and read is ACC.
You do not need white in this application- it could be DRL for some european models, I can only guess. So leave it isolated or just cut it off.
@@MorozovAutomotiveбелый провод подключаеться к габаритам . Желтая лампочка с боку фары. При включении габарита , яркость ходовых огне цу гаснет
I want sequential tail lights, anything like that on the market?
Hi. There is this product - cartrimhome.com/Rear-Tail-Fog-Light-Lamp-Toyota-rav4-2019?tracking=morozov_automotive. It is being installed in the rear bumper in place of reflectors and works as sequential turn signal / marker / stop light.
@@MorozovAutomotive cool! I'll check it out
it this only for the adventure model ?
Yes, this one is. They also have one for non-adventure models - cartrimhome.com/New-style-DRL-RAV4-2019?tracking=morozov_automotive.
So the regular Fog light doesn’t work?
Everything works. The New turn signal lights don't affect the fog lights in any way. We just didn't turn them on during this demonstration.
Did u rempve the white wire?
You can cut it off or just isolate, but if your model has DRL you may connect it to that wire to support this feature.
Anyone have a link to the wire harness plugs he used??
3 Pin Connector Waterproof Connector, Male and Female, 16 AWG Wire Suitable for car Truck, Boat and Other Wire Connection (5 kit) - amzn.to/44Jv7FT.
how did you do the connection and also where do I buy those modified connectors?
You can do direct tapping into onboard circuit, close by to front turn signal bulb socket (there are a lot of different tapping connectors on the market). I did soldering instead. 3-pin connectors( bought at amazon) that I have used are optional, for quick release in case of changing that light feature in the future, if it fails.
@@MorozovAutomotive would it be ok if I tap the White, Red and Black wires directly into the headlight cable? then use the yellow wire to tap into the signal light? and get rid of the LZGD box that comes with it.
@@solidsnake2030 Not like that. Nothing goes to the headlight. Yellow red and black- to form (turn/ marker/ ground) cable that is the single cluster of wires that goes to the front turn/ marker lights. White wire is DRL and will not be used. Black box just a splitter-no need for this application. You also need tester or DMM to define operation of each circuit- OEM wires are factory color coded so you have to find their functionality first. Would recommend to use help of someone with electronic/ electric experience.
@@MorozovAutomotive thanks for your reply. I've noticed that you're just using Yellow, Red and Black. Which can be tapped into the signal/turn cable. I did buy a 4 pin connector (just in case if I needed the white wire to be connected to the headlights in the future). However, I'm gonna try to install it tomorrow and see how it goes. Thanks man really appreciate your help
@@MorozovAutomotive I was able to install it using t-taps. Very simple process and better than the original setup they included in their package. Thanks for your help. Appreciated
Eh I’m not a fan. I think it makes front end too busy looking. It’s a cool idea but for me, it looked better before. Cool channel though.
Jackass Dick obviously you.
так смешно по английски говорите :)
What is that connector?
Aftermarket. Anything with a 3 pins will work, but you have to tap (or solder) it to existing circuit. They do not supply T-splitter for this application, unfortunately.
Only for adventure model?
Hi, yes, this style is only available for the Adventure model. For non-adventure they have this kind of turn signal/drl lights - cartrimhome.com/New-style-DRL-RAV4-2019?tracking=morozov_automotive.