Bro can you pls advice me with the link of Dodge charger SXT 2014 rear view back up camera , from where i can buy not the original one from mopar as it is so expansive i need any other type good quality with clear result and park assist.
I recently bought a 14 charger with a 5.7 with 132k miles on it and I put a cold air and a cat back on it. Looking into cams at the moment. It just depends on your budget and what you want to do.
9 over 32.... lol.... the staples are fine.. not sure if you are just coming up with stuff to say maybe.. Just so you know they make tops for these that already include the plastic so there is no having to re-staple anything. Took me less than 10 minutes to swap it all over with the one I bought.
I have a new cover coming for my Chrysler 300 tomorrow. Nice video. Looks simple. It will take time, but not complicated. Did you have any issues with the staple length wanting to go through the plastic?
Aye bro! Were you ever able to fix the airbag light with the Braum seats? And also where the hell did you get the nut/washer for the bolt that is attached to the seatbelt that mounts to the inner side of the brackets? I heard you say you had it custom made at Home Depot, but I cannot seem to find the size anywhere. Thanks man!
no man still didn't fix the airbag light, the custom bolt I just got it of the shelf from home depot, I tried maybe 3 or 4 sizes till I got the right one, sorry I don't remember what size it was
Definitely a cheap replica. A quality product will mirror the template made from the original piece. But great video… This issue just happened to me and now know what I need to complete this..
Really only needed the first 30 seconds but solid video man.
Using a bedroom bed for a work shop table is as real as it gets. Thanks for the video Hemi.
I’ve had harbor freights plastic trim tool set for 7 years. It’s still works and has a million and one uses.
Bro ur videos are so helpful fr I’ve already watched 2 of your vids and they helped
You can spray adhesive and epoxy it instead of stapling
I bought me a cover before the damage happened so these are nice to protect I love them 😍
This was a good video , thank you for the help
Thanks for the video it was great and you did pretty good!! And funny ending 😂 😂 blessings
Nice ! Keep up with the diys for our 11-14 Chargers. Good video bro 👍🏻
You ever ran into the low oil light, but when you check the oil level is good. I changed the oil pressure sensor n its still on
Thank you dog fr
You should have let it sit in the sun to be able to stretch it
What shop in Houston did you took it to, for the camshaft install ?
Btw continue uploading u got good content 👍
Bro can you pls advice me with the link of Dodge charger SXT 2014 rear view back up camera , from where i can buy not the original one from mopar as it is so expansive i need any other type good quality with clear result and park assist.
Sweet vid
Thanks man
How do I get it off if the latch it broke?
Btw I’m installing mine now I’ll let you know how it went 😂
What kind of tune are you running?
Thanks
Where can I buy that
Yo, i have a 2013 dodge rt hemi and I want to add mods to it but I’m not sure because it has 99k miles. Would it be worth adding mods to it?
I recently bought a 14 charger with a 5.7 with 132k miles on it and I put a cold air and a cat back on it. Looking into cams at the moment. It just depends on your budget and what you want to do.
Know that mods rarely improve the resale value. So it’s all about you and how long you plan to keep the car.
9 over 32.... lol.... the staples are fine.. not sure if you are just coming up with stuff to say maybe.. Just so you know they make tops for these that already include the plastic so there is no having to re-staple anything. Took me less than 10 minutes to swap it all over with the one I bought.
I have a new cover coming for my Chrysler 300 tomorrow. Nice video. Looks simple. It will take time, but not complicated. Did you have any issues with the staple length wanting to go through the plastic?
No problem with the length I got the shortest one available.
@@HemiPharaoh thank you.
The whole Dodge/Chrysler line
Not surprising
Did you ever find the solution for the airbag and seatbelt lights?
No man, I doesn't bother me as much now since I dont daily drive it.
Welcome Back Bro ...
Aye bro! Were you ever able to fix the airbag light with the Braum seats? And also where the hell did you get the nut/washer for the bolt that is attached to the seatbelt that mounts to the inner side of the brackets? I heard you say you had it custom made at Home Depot, but I cannot seem to find the size anywhere. Thanks man!
no man still didn't fix the airbag light, the custom bolt I just got it of the shelf from home depot, I tried maybe 3 or 4 sizes till I got the right one, sorry I don't remember what size it was
My dude, did you say, take your squeegee..?
It is made by hand
DAM MINES LOOK LIKE THAT SAME PATTERN
Definitely a cheap replica. A quality product will mirror the template made from the original piece. But great video… This issue just happened to me and now know what I need to complete this..