Good catch. It's more towards the 2mm. 2cm is almost 3/4in and I don't recall it being that far apart. Good luck! You may have to play around with the spacing for your truck.
@HenryHuggins-c2u it's been a while so my memory is a little fuzzy. But I think I had the actuator unplugged. I plugged the actuator back in, had someone turn the key to turn the accessory on. The actuator recycles and spins back and forth. The position that it stops in is the "home" position. Then I made the 2mm adjustments based off that. You'll have to play around with it to get an idea of what it's doing. Good luck!
Did you figure out why it wasn't engaging? Most of the time the little DC actuator motor will rust out because the breather tube gets compromised. How did yours get out of sync so bad if the motor still works?
Good catch. It's more towards the 2mm. 2cm is almost 3/4in and I don't recall it being that far apart. Good luck! You may have to play around with the spacing for your truck.
Clear as mud but thank u for trying to, just gonna dive in
Can you clarify by saying rotate the gear assembly eithe clockwise or counter clockwise 2mm from its home position..thanks
@HenryHuggins-c2u it's been a while so my memory is a little fuzzy. But I think I had the actuator unplugged. I plugged the actuator back in, had someone turn the key to turn the accessory on. The actuator recycles and spins back and forth. The position that it stops in is the "home" position. Then I made the 2mm adjustments based off that. You'll have to play around with it to get an idea of what it's doing. Good luck!
Did you figure out why it wasn't engaging? Most of the time the little DC actuator motor will rust out because the breather tube gets compromised. How did yours get out of sync so bad if the motor still works?
@imsuuuuure3074 the motor was rusty from where water was getting in from the breather tube hole but after cleaning it up, I got it back and running.
@@imsuuuuure3074 there's a video somewhere that shows taking apart the motor and cleaning the contacts inside. That's why I ended up doing.
2cm or mm please confirm
I think he ment 2mm