멋진 플로팅 테이블이네요. 테이블의 4개의 다리 이외에 하단으로 지지목을 결합시킬 경우, 테이블 좌우(좁은면 쪽)로 의자를 놓는데 제약이 있을 것 같아서 황동봉으로 테이블 다리를 단단하게 결속하여 주시고 이외의 다른 지지목은 생략하신 것 같습니다.(제가 잘못 생각한 거라면 바로잡아 주세요^^) 한달 전에 제작과정 올려주셨던 화이트오크 의자와 너무 잘 어울릴 듯 싶습니다. 항상 좋은 영상 올려주셔서 감사합니다.
Because the surface is not flat, it is concave or convex, so we use a plane to make conditions. It looks flat, but it's often not [목공 수공구 7. 판재집성] 넓고 긴 상판 집성하기 [How to make wood large top] ua-cam.com/video/axQl_UihOm8/v-deo.html
@@handwerker_kor I don't mean hand planes, I mean why do you pre-finish before glue up, as in why do you use oil on everything before glueing insteads of after the piece is assembled.
@@andi.popescu If you finish it after assembling, you get a lot of bond marks, and if you remove it with a knife and chisels, you get a defect on the surface. It's absolutely difficult to finish the 90 degree connection. So, I finish it at least twice before assembling it After assembly, the finish will be lower in quality than the pre-assembly finish
Great work Buddy. Its everytime a pleasure
thanks Rob_one! have a gooday!👍
작품도 아름답고 음악과 대패질 소리가 너무 좋습니다. 저렇게 잘 어울리다니 불멍도 좋지만 대패멍도 괜찮네요.
대패로 하면 힘도 덜들고 재미도 있어요 ㅎㅎ 감사합니다
항상 최상의 제작을 보여주시는 것 같아요, 좋은 영상 감사합니다. 😀
Nice work and design 👏👏👏👏
멋진 플로팅 테이블이네요. 테이블의 4개의 다리 이외에 하단으로 지지목을 결합시킬 경우, 테이블 좌우(좁은면 쪽)로 의자를 놓는데 제약이 있을 것 같아서 황동봉으로 테이블 다리를 단단하게 결속하여 주시고 이외의 다른 지지목은 생략하신 것 같습니다.(제가 잘못 생각한 거라면 바로잡아 주세요^^)
한달 전에 제작과정 올려주셨던 화이트오크 의자와 너무 잘 어울릴 듯 싶습니다.
항상 좋은 영상 올려주셔서 감사합니다.
안녕하세요! 네 맞습니다. 그것도 그렇지만 장부를 길게써서 황동봉을 안칠려고 했는데 장부를 2단으로 넣던가 쌍장부 설계를 미리했어야했는데요. 그 부분이 후회가 남긴합니다. 좋은 말씀 감사합니다
Gerçekten güzel oldu elinize sağlık 👍👍🇹🇷🇹🇷
Супер
just curious, why don't you use bandsaw for cutting the tenons?
The bandsaw is cut roughly and the dimensions were inaccurately
안녕하세요 테이블을 구입하려면 어디로 연락드려야할지 문의드립니다
I'm really curious why you guys choose to pre-finish before glue-up. I can't think of any practical reason to do that.
Because the surface is not flat, it is concave or convex, so we use a plane to make conditions.
It looks flat, but it's often not
[목공 수공구 7. 판재집성] 넓고 긴 상판 집성하기 [How to make wood large top]
ua-cam.com/video/axQl_UihOm8/v-deo.html
@@handwerker_kor I don't mean hand planes, I mean why do you pre-finish before glue up, as in why do you use oil on everything before glueing insteads of after the piece is assembled.
@@andi.popescu
If you finish it after assembling, you get a lot of bond marks, and if you remove it with a knife and chisels, you get a defect on the surface. It's absolutely difficult to finish the 90 degree connection.
So, I finish it at least twice before assembling it
After assembly, the finish will be lower in quality than the pre-assembly finish
@@handwerker_kor thank you!
영상 잘봤어요~~
식탁 상판 마감은 어떻게 하시나요??
사용자의 의견을 존중하는데, 보통 오일+레너 프리미엄을 반강요적으로 하게 합니다 ㅎㅎ
@@handwerker_kor 그렇군요^^
오일만으론 힘들군요 ㅎㅎ
@@user-ip7vq9ke9q 오일만 하려면 최소 5회 이상 들어가야해요
그리고 관리 철저해야죠 ㅎㅎ
@@handwerker_kor 제가쓰려면 오일마가만 할껀데.... 지인분들 주려면 아무래도 관리가 어려워서 ㅠㅠ