I beg i need your answer, see i bypass my the battery and the panel so it's displaying on the screen that general error and the panel is giving the same voltage with the battery out put.
Can you do video on charging problem. My Lumos charge my battery with 11.8v instead of 16.8v . My solar panel is working perfectly well when i read it.
Power issues are complicated; as at the moment I don’t have power failure issues with any board if done correctly; so if you having power issues kindly check every transistor and capacitor and diodes if everything first otherwise ship it to me for proper checks
Sir please answer, my solar have stop recharging with MTN card if i buy card and load it on my phone if i send sms to 317 before it recharged but now if I send SMS to 317 no respond or there another way of recharging it pls I need help no light in Nigeria
Hello, i have been trying to bypass mine, filed the battery open but confused how to go about comnecting the 2 red together, plus my lumos box has been idle for a while, dont know how to charge the battery right now
Oh sorry about that; what you need to do is to solder the two red wires with a jumper wire From the panel make sure u don’t temper with any of its components…for leaving it idle for a while please change it to as list 20%
@rbcreatorrbkings i dont know how to charge it, when i connect the solar panel to it i don't know if its charging or not, i texted you on Instagram please
@user-we8ge6fx7i they did because the battery is expensive and is like getting a new one, the battery cost around 100k for replacement and to get a replacement and start afresh cost around 75k so if that’s is the case get a new one and replace the new battery to the old one without paying monthly on the new box since the old one is unlocked
From the inverter or output ?? Secondly did u bypass the battery security as showed in the video? Thirdly did you bypass the main panel as shown in the second video? You have to do the both to archive results
This could have been a great content It’s obvious you’re a pro but You’re not a good teacher or explainer, only you know what you’re doing because you’re not carrying us along.
Pls when you do thr bypassbfrom the battery how do you go about the supplies from the circuit
It’s in the video watch it and follow the steps if there is anything else let me know
I beg i need your answer, see i bypass my the battery and the panel so it's displaying on the screen that general error and the panel is giving the same voltage with the battery out put.
Kindly press and hold the power button for 15sec it all reboot and the error will disappear … it’s nothing to worry about
Thanks for this great content... Can I use the lumous panel with my normal inverter?
Yes but preferably a 12v system and a transformerless inverter is better for efficiency
And i notice that the lumos box will work fine,if the there is sun
If your lumos box works fine when there’s sun then your batteries are faulty or bad
Okay, tnks
U are welcome
Can you do video on charging problem. My Lumos charge my battery with 11.8v instead of 16.8v . My solar panel is working perfectly well when i read it.
Power issues are complicated; as at the moment I don’t have power failure issues with any board if done correctly; so if you having power issues kindly check every transistor and capacitor and diodes if everything first otherwise ship it to me for proper checks
Pls how can i bypass mysol solar battery
Massage us on instagram @rbcreatorkings
My lumous battery is blue casing and plastic, even the board is a little bit different
Dm me via instagram @rbcreatorkings and send the picture of the box and battery
Sir please answer, my solar have stop recharging with MTN card if i buy card and load it on my phone if i send sms to 317 before it recharged but now if I send SMS to 317 no respond or there another way of recharging it pls I need help no light in Nigeria
If you recharge and it didn’t reflect kindly contact customer service they all help you activate otherwise crack the system and stop paying
Hi
Hello, i have been trying to bypass mine, filed the battery open but confused how to go about comnecting the 2 red together, plus my lumos box has been idle for a while, dont know how to charge the battery right now
Oh sorry about that; what you need to do is to solder the two red wires with a jumper wire From the panel make sure u don’t temper with any of its components…for leaving it idle for a while please change it to as list 20%
@rbcreatorrbkings i dont know how to charge it, when i connect the solar panel to it i don't know if its charging or not, i texted you on Instagram please
@@rbcreatorrbkings hello?
Ok we will chat there I have replied you I’m usually free at night so you can chat me up around 21:00
I’m with you
Ok sir what to do know
I recommend you check or ship it for check up on batteries so you would know what to do next…
Pla sir how can someone get it
Because the last time call customer center they ask to get another one
@user-we8ge6fx7i they did because the battery is expensive and is like getting a new one, the battery cost around 100k for replacement and to get a replacement and start afresh cost around 75k so if that’s is the case get a new one and replace the new battery to the old one without paying monthly on the new box since the old one is unlocked
They ask me to buy complete box and pane #300plus
@user-we8ge6fx7i oops ask them for the monthly package it around 75k first time payment then 12.5k monthly or so so u can bypass it
i want to repair my own lumos
What’s your location?
Hello.
I bypassed my but am not getting current from the inverter
From the inverter or output ?? Secondly did u bypass the battery security as showed in the video? Thirdly did you bypass the main panel as shown in the second video? You have to do the both to archive results
And why didn't you disconnect the red from the battery and connect it directly, you only showed us how to do it but you didn't disconnect it yourself
Watch it again
Has anybody try it
What you saw there is exactly what I did
E nr dey work o
I just tried it,I did everything he said
Send me a clear picture of ur panel and battery
Drop your WhatsApp number I will so u can send it over to wall you through
Hello, is there a way i can contact you, i have a lumos box i want to work on
This could have been a great content
It’s obvious you’re a pro but You’re not a good teacher or explainer, only you know what you’re doing because you’re not carrying us along.
Oh sorry bro u can ask questions and I will attend to u ok; and would do more videos on that using different context
Hello.
I bypassed my but am not getting current from the inverter
Did u bypass the battery security as shown in the video