Hi Gary, thank you for the video. What is the actual torque setting for the nut when re-installing the brake drum with the new bearing fitted. I also stood on the power bar to make the final tightening of the nut, but one of my friends told me later that there is a torque setting for that nut. Thanks Jakes
Valve stem seals worn/damaged, or incorrectly fitted oil rings. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Hi Gino, thanks for supporting my channel with your visit, I presume you are referring to the NP200 rear wheel bearings, it may differ especially as you get ABS and non-Abs, best to use a sample to compare and make sure.
It does not require any maintenance, when the fuel pump packs up that is when it gets replaced because it is incorporated into the fuel pump submersible unit
Hi Gary, thank you for the video. What is the actual torque setting for the nut when re-installing the brake drum with the new bearing fitted. I also stood on the power bar to make the final tightening of the nut, but one of my friends told me later that there is a torque setting for that nut.
Thanks
Jakes
You are the best sir
Thanks for your support and interaction it is very much appreciated.
Good day i have a 8v np200 the engine was overalled completely but it smoking in the morning when the engine is cold and it's smells like burning oil
Valve stem seals worn/damaged, or incorrectly fitted oil rings.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Are all rear wheel bearings the same or does it differ according to the year model
Hi Gino, thanks for supporting my channel with your visit, I presume you are referring to the NP200 rear wheel bearings, it may differ especially as you get ABS and non-Abs, best to use a sample to compare and make sure.
Thank you Garry were do I find the fuel filter on this van
In the tank
@@vehiclemaintenanceandrepai3790 tx you buddy much appreciated also how often must it be cleaned
It does not require any maintenance, when the fuel pump packs up that is when it gets replaced because it is incorporated into the fuel pump submersible unit
@@vehiclemaintenanceandrepai3790 once again huge thank you
Always a pleasure
Please show to replace front left wheel bearing on nissan np200
Will do Julian, as soon as 1 comes in, thanks for supporting my channel with your visits.
Thanks dude....you're star.
Thanks for your support Tobie, without you guys this channel will be worthless.
Gary
Hi Gary what size it the nut that holds the drum.... I know it's quite big
Size 36mm
How to set tappets on NP 200 8v
Hydraulic, non adjustable
Bliksem, thats not how you do it. Theres a torque setting for it. Eish, will not give my car to you to service!
No problem Frik, experience does tend to intimidate hey Lol.