New to Drifting and thinking of starting out with this Kit Thanks for the tips But also want to say whoever filmed the drifting did the best job I have seen awesome work.
@Mr Robekensugi Im new to rwd drifting and i own a d4 as well. Im currently trying to set up my D4 and heard alot about having the right steering ackermann and geometry. What is a "correct and good" ackerman?
@@robekensugi i managed to hold a consistent circle and drift 1 turn( no transitions) and thaught i sucked. Good thing the gyro is comming in a few days
Hi, great video ! I watch it almost everyday to set up my D4. But can you please let me know what kind of shock oil you use for front & rear damper ? A saw it Kit Standard 350 but I wonder if I can use the shock oil of Boom Racing which is 35wt instead ( they told that it equivalent to 350cst ). Thank you :) !
just fyi....mst knuckle outer bearing is a different size, unless i ordered the wrong knuckles...I was able to use the original axle, it's a tight squeeze but it works
+Hunter Prater My honest opinion: buy Sakura D4. I think it is not worth spending money to convert the Sprint 2, as it is currently difficult to find spare parts for the Sprint 2.
Oohh..thank you so much..i'm planning to get a RWD Sakura D4 kirin version..but i think the Regular Sakura D4 chassis works fine, it just needed a little bit of customization
Mr. Robekensugi..good evening!..What brand Rc drift tires can you recommend for Asphalt surface track?..i hope you can give some recommendation or suggestions..My chassis is Yokomo DiB Rs version..
robekensugi thanks for the fast reply. I am asking because I have MST knuckle here for my canceled TT02 RWD project, I just bought and build my D4 RWD and drift it, but watched your videos and considering to change the knuckle if its necessary. but to bad I dont have the MST axle yet.
+MrFabrizioPandolfi Hmmmm.... It's hard to answer ! But I think is doripake, because I'm use that for many year and I have "affection" for the DP. Sakura D4 is a new commer with excellent potential. My DP is like a old Toyota AE86 and Sakura D4 ,the new Toyota 86. Sorry to answer too late!
Don't worry Roberto-san. It's never too late. AE86 can still be good even at these days (I remember Tsuchiya's 86 1.8L stroker). I have D4 too, but i also have D3, Himoto (same layout as DoriPake) , and an old RWD car like the D4. I think the same as you, i'm very "afeiçoado" to my Himoto RWD converted. OLD BUT GOLD!
+Alzidjali Suleiman You need this 2 parts: Knuckles: www.rcmart.com/kpi-upright-set-p-38437.html?cPath=595_1643_1685 Axle: www.rcmart.com/fxxd-axle-2pcs-p-60533.html MST and D4 bearings are the same size.
Voltage Cutoff value is completely wrong. It should be 6.4V in your case, but I recommend to set 7.0V - 7.2V to save battery life. Actually you don't want to go lower than 7.4 for LiPo battery.
New to Drifting and thinking of starting out with this Kit Thanks for the tips But also want to say whoever filmed the drifting did the best job I have seen awesome work.
Thanks for helping me! I just ordered my D4 and can't wait
It's really a good chassis!
Thank you so much for posting this! I was looking for a few hours on a good way to fix the front knuckles . I just ordered the parts !
+Gary Stout My pleasure (^o^)/
These vids are so helpful , thanks homie
@Mr Robekensugi
Im new to rwd drifting and i own a d4 as well. Im currently trying to set up my D4 and heard alot about having the right steering ackermann and geometry. What is a "correct and good" ackerman?
i just bought the parts and the outer bearing on the mst knuckle is small to fit
Nice clean wiring. I"m jealous.
Could you tell how much cost in US$ all the kit? With radio included.
And where we can buy? RCMART??
Thanks.
How much does the gyro help, and how to set it up?
Without gyro it's impossible to run on RWD drift. Set up depends of the gyro brand.
@@robekensugi i managed to hold a consistent circle and drift 1 turn( no transitions) and thaught i sucked. Good thing the gyro is comming in a few days
Hi, great video ! I watch it almost everyday to set up my D4. But can you please let me know what kind of shock oil you use for front & rear damper ? A saw it Kit Standard 350 but I wonder if I can use the shock oil of Boom Racing which is 35wt instead ( they told that it equivalent to 350cst ). Thank you :) !
Yes, you can use any damper oil brand. No problem.
wow, quick reply ! Thank you so much :)
You're wellcome!
Watching in 2020 😎😁
this is so affordable now ..🤑
Thanks for the vid and great information for a newbie like me ..
just fyi....mst knuckle outer bearing is a different size, unless i ordered the wrong knuckles...I was able to use the original axle, it's a tight squeeze but it works
Many players in China are using slide rail for D4 very good
Ty for sharing ur set up 👍 very helpfull, but why did u put the gyro do far in the front?
Need please, to see more about that DIY 240 man!
+Damo Mihelich That DIY 240 is not my RC. The owner running with other car now, but maybe someday he will run again with that RC car.
Alright then, thanks though. :) I like your counter steer skills..
What pinion gear did you use for the motor pinion
so is this stock angle steering
What battery can I use the one your using
Very nice setup very smooth
How do you connect the car body to the chassi
Using magnetic body mount. I make a video about : ua-cam.com/video/TLTmcW0RP20/v-deo.html
Hi bro i have a question .. i placed mst knuckles on my d4 but now it got 0 caster :/ what should i do?
Thanks, very interesting. You are a master .
What is it good for the gyro ? Awesome video !!
awesome drift and setup !
Anyone know what size shell is needed for this chassis
1/10 size.
where can i get those rims, sprigs and brakes men, also the d-lies turn buckle i was looking as crazy but couldnt find it
+Jean Piere Cucalon The brake disk are Eagle Racing products. D-like turn buckle I bought used, but that's just garnish.
この動画のSAKURAD4に使われているボディマウントはどこの物でしょうか？
Eagle Racingのマグネットボディーマウントtype4です。１９８０円だったかな？
+robekensugi ありがとうございます！
What do u think of the dpi sprint 2 mod wise what would you do
+Hunter Prater My honest opinion: buy Sakura D4. I think it is not worth spending money to convert the Sprint 2, as it is currently difficult to find spare parts for the Sprint 2.
Thanks ima do it I think
Mr. Robekensugi..the color of your Pandora S13 is soo cool...Did you use Tamiya PS paint for this Body?..What color did you use for this?.
Yes, it's tamiya spray. First I use metalic red and after dry, tamiya white and at final, tamiya black.
Oohh..thank you so much..i'm planning to get a RWD Sakura D4 kirin version..but i think the Regular Sakura D4 chassis works fine, it just needed a little bit of customization
Mr. Robekensugi..good evening!..What brand Rc drift tires can you recommend for Asphalt surface track?..i hope you can give some recommendation or suggestions..My chassis is Yokomo DiB Rs version..
Mr Robert are you using standard rear toe?
I think so. Rear toe is 1 degree.
hey i learn a lot in this video ! . by the way what is that front tire name and serial number???(when 5:48 stops)
HPI T-Drift tires. #4421 - ADVAN NEOVA AD07 T-DRIFT TIRE 26mm
What size body does the sakura take?
Thank You, I will mount the same engine with the ESC BL-SP3, Yokomo not recommend using 8.5T to drift.
You have any recommendations about this?
+HServerus Now I'm using 10.5T motor with HobbyWing ESC. I recomend 10.5 or 13.5T.
+robekensugi great, thanks l !!
with this engine the gear ratio change or remained 8.9?
Hi, im new to all this but im very intrested in buying one for drifting and i see some of them are 4WD and some are RWD. Witch one's are better?
Same here, how did you decide? My thoughts are as a newbie awd might be easier?
hey my friend, can you tell me a good setup with new parts, i know allot of new stuff was released after this video
Where can i buy that motor i wanted to make teh same setup
Can you make a list with the electronics and extra parts
why do you need to upgrrad to MST knuckle?
Because with the normal knuckle is impossible to get a good ackerman. The new Sakura 2017 model change the knuckle and I think now is good.
robekensugi thanks for the fast reply. I am asking because I have MST knuckle here for my canceled TT02 RWD project, I just bought and build my D4 RWD and drift it, but watched your videos and considering to change the knuckle if its necessary. but to bad I dont have the MST axle yet.
So does it come with the electronics?
Without eletronics.
Hey robekensugi. Will Usukani front Knuckles work?
I think so, but I've never tried it.
Hi! I just want to know what spring rate you are using on rear? Thanks!
+rai mangampo RC926 ultra soft springs (white).
+robekensugi Thanks dude! Any new updates on your D4?
+rai mangampo Yes. Now I'm using short lipo battery and change the ESC to Hobbywing ver. 2.0 with boost and turbo (removed from my doripake...).
+robekensugi Nice! Did you replaced the front upper turnbuckle? how many mm is it?
+rai mangampo It's a D-like "triangle arm block". But don't need change to this. It's justa embellishment for look better.
สวยงามมากครับเมื่อไม่ใช้แดร็กเบรค
Hello Roberto-san. D4 vs your Doripake RWD, which you prefer?
+MrFabrizioPandolfi Hmmmm.... It's hard to answer ! But I think is doripake, because I'm use that for many year and I have "affection" for the DP. Sakura D4 is a new commer with excellent potential. My DP is like a old Toyota AE86 and Sakura D4 ,the new Toyota 86. Sorry to answer too late!
Don't worry Roberto-san. It's never too late. AE86 can still be good even at these days (I remember Tsuchiya's 86 1.8L stroker). I have D4 too, but i also have D3, Himoto (same layout as DoriPake) , and an old RWD car like the D4. I think the same as you, i'm very "afeiçoado" to my Himoto RWD converted. OLD BUT GOLD!
what color code is the s13 dody?
+gb2055 Tamiya PS15 Metallic Red Polycarbonate Spray Paint 100ml PS-15. First paint metallic red and next white. At the final I paint black.
PERFECT VERY GOOD, BRASIL OK.
Top job!
Nice setup
links for the replacements please!!!
+Alzidjali Suleiman
You need this 2 parts:
Knuckles: www.rcmart.com/kpi-upright-set-p-38437.html?cPath=595_1643_1685
Axle: www.rcmart.com/fxxd-axle-2pcs-p-60533.html
MST and D4 bearings are the same size.
robekensugi thanks
How about upper arm?
D4 genuine upper arm is not adjustable. But you can install others parts from others RC parts brand to adjust the upper arm.(Yeah Racing RC parts)
robekensugi is it change the bulkhead too?
Can fit on normal bulkhead. www.yeahracing.com/catalog/skd4002pk-aluminum-caster-adjustable-suspension-3racing-sakura-pink-p-4114.html
Great video!!!
Thanks!
AHAHAHA ai sim cara é bom de ver um brasileiro fazendo um bom vídeo e bons drifts
Obrigado Christian .
i think those curved rodends should be switched right-left.
thank you!
Realy Good :-)
Voltage Cutoff value is completely wrong. It should be 6.4V in your case, but I recommend to set 7.0V - 7.2V to save battery life. Actually you don't want to go lower than 7.4 for LiPo battery.
바디 name whay
Cool
Nice setup