Just put 14" apes on my 2016 48 and the stock wires and cables all fit. However, I am going to add about 6" to the left side wires so there is a little more slack.
Pretty cool video... Just extending the existing if that makes sense.... So help out a brother here, if I install 3.5" risers I should be good to go, right? I have a 2015 48. I cant afford $1000 I am a disabled Vet so money don't come easy... Thanks in advance. Ride safe.
I currently have 11 inch "ram horn" bars with a 2 inch riser. (1999 FXDWG OEM) I'm interested in swapping them for 14 inch lane splitter MX T-bars. They have basically the same dimesnions, but in a very different profile. Will I need any new cables?
You might get lucky and already have a extended wiring harness, from whoever did the first bar swap for the 11’s… (But of course you won’t know until you start the swap and pull the wires) If not, then you will definitely need to get a extended wiring harness. Making your own extension will be a lot cheaper. You can obviously get the all the right COLOR cords so everything matches. We just did it this way because we couldn’t find all the right COLOR cords we needed..!! Is your handlebar wiring ran through the 11’s you have now??
Can you do a walk around video of the nightster? Going over the parts and look? There is very little info and pic/video of Nightsters done club style. Trying to do my bars and need to decide on height at the moment. Thanks!
Old Roy Wilson I can definitely do that the next time it’s here!! Just give me a few days... if you’re any taller than 5”6 don’t go any shorter than 14 inch bars!!
We relocated it for the purpose of getting pulled over. You can rock it without the speedo. Even the amount that I make and use you can’t really see it. It’s mostly there for the carbs so when they say what is your speedo at at least it’s there 🤣😂
badsanta518 it’s a hack because we didn’t buy a harness we made one. Fucking idiot!! You should think before leaving a comment.. especially when you can’t even write out a very small sentence without having to edit it cuz you can’t even spell!!
JT TERRY thank-you! Is that why you guys chose not to mount the speedo on top of the bar/riser? Trying to put some 10” risers with a Moto bar on a nightster and want to mount the speedo on top. Very little info on this exact thing out there. It already has mini apes, so all the other cables and wiring are good to go, it’s just that speedo issue. If you did look into the speedo extending, were there any options for that, or just completely rewire it?
Peter Penner it worth a shot. I’m thinking the clutch cable might be really tight on you. So if you were to adjust it so it engages in a different spot it might just work. I’m almost 100% sure the throttle cables will work but you’ll have to route it outside of the forks not in between them!! And you’ll will definitely need a new front break line.
Hundreds of dollars? For $33 you buy a simple plug n play wire extension from NAMZ. No cutting, no solder, no butt connectors and color matched.
Nices bikes bro... smart idea adding the wires i just did the same thing after watching your video. I installed 14” mx tbars
Crazy Josh A thank you bro!! Glad I could help!!
Just put 14" apes on my 2016 48 and the stock wires and cables all fit. However, I am going to add about 6" to the left side wires so there is a little more slack.
Man I got the same bike!! Super helpful video!!
Pretty cool video... Just extending the existing if that makes sense.... So help out a brother here, if I install 3.5" risers I should be good to go, right? I have a 2015 48. I cant afford $1000 I am a disabled Vet so money don't come easy... Thanks in advance. Ride safe.
Vromo Gata you’re good to go brother!! Thank you for your service!! VP WARRIORZ of LIBERTY MC
Thank you great video
Wes Walmsley glad I could help
I currently have 11 inch "ram horn" bars with a 2 inch riser. (1999 FXDWG OEM)
I'm interested in swapping them for 14 inch lane splitter MX T-bars.
They have basically the same dimesnions, but in a very different profile. Will I need any new cables?
You might get lucky and already have a extended wiring harness, from whoever did the first bar swap for the 11’s…
(But of course you won’t know until you start the swap and pull the wires)
If not, then you will definitely need to get a extended wiring harness. Making your own extension will be a lot cheaper.
You can obviously get the all the right COLOR cords so everything matches. We just did it this way because we couldn’t find all the right COLOR cords we needed..!!
Is your handlebar wiring ran through the 11’s you have now??
Haha I got the same exact bike too 😆👍🏽👍🏽
Can you do a walk around video of the nightster? Going over the parts and look? There is very little info and pic/video of Nightsters done club style. Trying to do my bars and need to decide on height at the moment. Thanks!
Old Roy Wilson I can definitely do that the next time it’s here!! Just give me a few days... if you’re any taller than 5”6 don’t go any shorter than 14 inch bars!!
@@JT-Terry FiNALLY THE ANSWER iVE BEEN LOOKiNG FOR
With a tbar setup do you have to relocate the speedo
@robert russell No you don’t. You can buy a special $300 Mount from Harley so it stays in the same place.
We relocated it for the purpose of getting pulled over. You can rock it without the speedo. Even the amount that I make and use you can’t really see it. It’s mostly there for the carbs so when they say what is your speedo at at least it’s there 🤣😂
Subscribed....
Did u have to do the harness wire extension brotha or is that jus a recommendation?
Depends on how high you want your bars anything over 10 inches your stock cables won’t fit
Guuut
YESS. Yess
Awesome Nightster. What brand name is the seat?
J Torres Jr le para kick flip
that's not a hack. that's how you're supposed to do it.
badsanta518 it’s a hack because we didn’t buy a harness we made one. Fucking idiot!! You should think before leaving a comment.. especially when you can’t even write out a very small sentence without having to edit it cuz you can’t even spell!!
I need your help with my bars I have the same bars it looks so sick
What do you need help with? everything on this video is here to show you how to do it without my help?
@@JT-Terry how much would you charge to do the bars
Does the speedo wiring fit the 10” bars fine? If it was mounted on top of the bars? Or is it too short? What about the 14” bars?
Old Roy Wilson Neither!!! It only worked with 4-6 inch risers
JT TERRY thank-you! Is that why you guys chose not to mount the speedo on top of the bar/riser? Trying to put some 10” risers with a Moto bar on a nightster and want to mount the speedo on top. Very little info on this exact thing out there. It already has mini apes, so all the other cables and wiring are good to go, it’s just that speedo issue. If you did look into the speedo extending, were there any options for that, or just completely rewire it?
Old Roy Wilson you can buy a longer kit or just add wires yourself like we did for the bars!
So what size is the throttle cable and return cable?
I have 14” T bars on a 1998 xl 1200
Whatever size stock is!!
Will this work with 16" t bars? Obviously the wiring part will but will the cables
Peter Penner it worth a shot. I’m thinking the clutch cable might be really tight on you. So if you were to adjust it so it engages in a different spot it might just work. I’m almost 100% sure the throttle cables will work but you’ll have to route it outside of the forks not in between them!! And you’ll will definitely need a new front break line.
Sorry another question man do you have a link for the front brake like line you put on?
Barnett Performance Products +6" Stealth Series Idle Cable 131-30-40041-06
???
Peter Penner all I did was go to a local shop and they made me one for 50$
Just got the 16" bars on you were right need longer front break and longer throttle but its ridable
What bars are these? And what is the total width or the bars?
Darian Jones Tyson biltwell 14 inch T-bar. 32 inches wide!!
How tall is your bro ?
He’s only about 5”3
MC. 78603
terrible video