We informative and crisp, just got my RCT and applied for zirconia crown for my molar. Earlier had a premolar with zirconia. wanted to check if emax would have been better choice. The doubt was cleared in just 3mins completely.
in case of clenching or any bad habits full sintered zirconia can layering on upper teeth only while lower teeth contraindicated to added any layering even with emax due to the functional cusp in lower actually buccal and with reapted cyclic loading of mastication lead to chipping any layering ceramic
chipping of zirconia with the painting of emax on it? Fixable? Needs to be fixed..I imagine the painting layer doesnʻt last forever..how long does it last..also can it be repaired if that part is damaged without removing the crown.. What about the full emac crown...what about repairs to that without removing the crown?
hi Dr actually I think the choice of materials either emax or zirconia not make as a basic concept posterior used zirconia while anterior used e max sorry this is not true how when placement resin composite rest in posterior teeth while the fracture strength of composite not exceed on 45mpa and be durability for at least 3 years without fracture so IPS empressII with pressabile technique reach after surface treatment to 450mpa which is enough and durabile as well as better margin adaption in comparison with zirconia the contraindication for using e max in posterior region if the patient have bad habits like clenching or burxism and in this case only full sintered zirconia or gold the best line of tratment
I grind my teeth and I had 3 emax put on 3 of my front teeth and within weeks two of them cracked. I had to replace them and they creacked. I finally had all 3 replaced today ziconia. 2 months of hell of crowns and temps taken in and out. I hope the zirconia work. I'll update in a few months on how my ziconia crown held up.
Hello doctor cud you plz explain the difference between crown preparation of combination( emax and zirconia) and emax crown preparation. I mean what are the dimensions for combination crown preparation. Kind regards
Respected doctor, I am from India. I have two PFM crowns in my mouth. One on front tooth and one implant of upper premolar. Those crowns are not giving natural feel to my tongue. They are more smooth and flat than other teeths in the mouth. Could you suggest me which material give more natural feel to my tongue?
Hello doctor, Can you please give me advise? A few days ago my upper molar was pulled out and near to this tooth I have a tooth with a zirconium crown. When I looked in mirror I found out that front part of this crown on side of my lips which used to be smooth now only has 1/3 of tooth smooth and seems like 2 millimeters thickness of my crown seems to be gone now. So I don't know what to do; is it possible to polish this crown to make smooth again? Or do I have to remove this crown? My tooth under this crown had a root canal and I hear that removing this crown is very difficult and can sometimes damage the tooth; is this correct?
Hello doctor, can you give me some advice? I lost an upper front tooth and I need a crown, doctors tell me that it would be good to use orthodontics first and then put the emax crown, do you advise me to use orthodontics? Do you recommend emax? I hope you can help me, thank you greetings
how is this possible with 2 sentences on a comment thread. Use some logic, make an appointment with a good honest doctor. I dont know if this one is or not. but thats what you need. Not a answer to a 2 sentence question on UA-cam. Now if you send a 3d scan, this can be certainly something a doctor can help you with. But, you get the picture.
Hello Dr. I have cad cam crown for anterior teeth and I have gummy smile so when I I smile my marginal gingiva looks black so, why it is and when we smile with our lip closed does our teeth come in contact...
Get zirconia if you can. I broke emax crown and I had to drill more tooth to put on zirconia. I didn’t know but if I knew I would have got the zirconia crown
Thanks for your tips. One question: in terms of heavy metals issues. Zirconia and E max are safe? (Lead, cadmium, mercury, aluminium ect) And cement (i know some of those has floride which is not good) but cement might be used different.
Good Qs. Yes Fluoride is a neurotoxin, as are other metals in the mouth. So I think a zyrconia implant would be better thna titanium in that case. But Dr Gorbatov does not metnion what the 75% zyrconia plus Emax crown is, so its hard to research more about it.
Hi doc i just got zirconia put in one of my front tooth:( i need atleast thd bottom half to appear translucent...is it possible to file it or scale and achieve the effect?..
@@mohammedzabeerali8920 I got zirconia. It has a little color difference but not too noticeable. I got a 5 year warranty. But the emax with zirconia had 8 year warranty but was dobble the cost of zirconia.
Most dentist prefer to put zirconia because as this doctor said emax is not as stong as zirconiom.But for aesthetic purposes emax looks natural teeth as it has high translucency,zirconia is more opaque that it looks thick and plasticky
Emax also does not apply to everyone ,it depends on the status of your original teeth or how much work or modification dentist need to do achieve the smile you want
M from india and i can't afford to go to us do u have any clinics in india m 21 yr old and I've been waiting for an implant from the last 9 years can u help?
Well explained. I guess that the mix won’t be as much translucent as a pure emax.
We informative and crisp, just got my RCT and applied for zirconia crown for my molar. Earlier had a premolar with zirconia. wanted to check if emax would have been better choice. The doubt was cleared in just 3mins completely.
Thanks, Doc! Just got my emax replaced with zirconia for my molar.
Any updates?
So what do you think?? Zirconia or e max is good??
@shonazirconiakhan2530
I have zirconium crowns blended i think. And its absolutely insane strong and looking very natural
What u mean blended have you got emax too?
Price per crown
in case of clenching or any bad habits full sintered zirconia can layering on upper teeth only while lower teeth contraindicated to added any layering even with emax due to the functional cusp in lower actually buccal and with reapted cyclic loading of mastication lead to chipping any layering ceramic
chipping of zirconia with the painting of emax on it? Fixable? Needs to be fixed..I imagine the painting layer doesnʻt last forever..how long does it last..also can it be repaired if that part is damaged without removing the crown..
What about the full emac crown...what about repairs to that without removing the crown?
This was a great explanation! Thank you! 😊
Excellent information Doctor. Thank you!
Thanks
And if we want to put a full implant up ? what is the advise ?
hi Dr actually I think the choice of materials either emax or zirconia not make as a basic concept posterior used zirconia while anterior used e max sorry this is not true
how when placement resin composite rest in posterior teeth while the fracture strength of composite not exceed on 45mpa and be durability for at least 3 years without fracture
so IPS empressII with pressabile technique reach after surface treatment to 450mpa which is enough and durabile as well as better margin adaption in comparison with zirconia
the contraindication for using e max in posterior region if the patient have bad habits like clenching or burxism
and in this case only full sintered zirconia or gold the best line of tratment
I grind my teeth and I had 3 emax put on 3 of my front teeth and within weeks two of them cracked. I had to replace them and they creacked. I finally had all 3 replaced today ziconia. 2 months of hell of crowns and temps taken in and out. I hope the zirconia work. I'll update in a few months on how my ziconia crown held up.
How is it now?
Need info your update
How's zirconia teeth now?
Is it working properly
Its been 3 weeks since I got Zirconia, pretty good so far.
What’s the update
Hello doctor cud you plz explain the difference between crown preparation of combination( emax and zirconia) and emax crown preparation. I mean what are the dimensions for combination crown preparation.
Kind regards
Thank you very much for this explanation dr!!!🙏 You're the only one who realy make me understand these difference!🙏😇🙏
Respected doctor,
I am from India.
I have two PFM crowns in my mouth.
One on front tooth and one implant of upper premolar.
Those crowns are not giving natural feel to my tongue.
They are more smooth and flat
than other teeths in the mouth.
Could you suggest me which material give more natural feel to my tongue?
Can you bite and chew??
Can you bite and chew
I have done my teeth in Croatia. They puted all ceramic zirconia on my upper jaw with one straumann implant on my left back teeth.
How are they?
@@hemtet5500 all I can say hat down to the dentist team . They did an awesome job. Nobody can notice they are not mine teeth
I just signed off on Zirconium for front teeth. Now I'm wondering if I am making a bad decision!!!
How about if the number of a missing tooth is more than 1 in the anteriors?
Hi doctor,
Is it possible to fix crown for single front teeth?
Which better zirconzahn or ivoclar
Very useful explanation!
Hello doctor, Can you please give me advise? A few days ago my upper molar was pulled out and near to this tooth I have a tooth with a zirconium crown. When I looked in mirror I found out that front part of this crown on side of my lips which used to be smooth now only has 1/3 of tooth smooth and seems like 2 millimeters thickness of my crown seems to be gone now. So I don't know what to do; is it possible to polish this crown to make smooth again? Or do I have to remove this crown? My tooth under this crown had a root canal and I hear that removing this crown is very difficult and can sometimes damage the tooth; is this correct?
Thank you for following us! Yes, most of the time it’s possible just to polish the crown.
Hello doctor, can you give me some advice? I lost an upper front tooth and I need a crown, doctors tell me that it would be good to use orthodontics first and then put the emax crown, do you advise me to use orthodontics? Do you recommend emax? I hope you can help me, thank you greetings
how is this possible with 2 sentences on a comment thread. Use some logic, make an appointment with a good honest doctor. I dont know if this one is or not. but thats what you need. Not a answer to a 2 sentence question on UA-cam. Now if you send a 3d scan, this can be certainly something a doctor can help you with. But, you get the picture.
Hello Dr. I have cad cam crown for anterior teeth and I have gummy smile so when I I smile my marginal gingiva looks black so, why it is and when we smile with our lip closed does our teeth come in contact...
I prefer less invasive procedures, which one between E.max and zirconia is the least invasive?
Get zirconia if you can. I broke emax crown and I had to drill more tooth to put on zirconia. I didn’t know but if I knew I would have got the zirconia crown
@@itsaaronlolz Thank you for the good piece of advice.
@@itsaaronlolzhey! did you get zirconia done in the central incisor? how does it look while smiling?
@@farhanalam2704 I have zirconia on my first molar. It’s a translucent zirconia crown. You can’t see it because it’s in the back but it’s very pretty
@@itsaaronlolzwhy did you need more tooth drilling ??
Koliko dugo bole zubi poslije brušenja pripreme za krunice?
Thanks for your tips.
One question: in terms of heavy metals issues. Zirconia and E max are safe? (Lead, cadmium, mercury, aluminium ect)
And cement (i know some of those has floride which is not good) but cement might be used different.
Good Qs. Yes Fluoride is a neurotoxin, as are other metals in the mouth. So I think a zyrconia implant would be better thna titanium in that case. But Dr Gorbatov does not metnion what the 75% zyrconia plus Emax crown is, so its hard to research more about it.
Zirconia is very harsh on opposing natural dentition.
Very Informative Video.
Thank You.
Kadeers!!!
Hi doc i just got zirconia put in one of my front tooth:( i need atleast thd bottom half to appear translucent...is it possible to file it or scale and achieve the effect?..
Where is your clinic
If you have a small tooth what kind of crowns do you need , can I put long crowns?
Very informative
How about zirconium crowns with porcelain feldspathic
Does zirconia crown they last forever?
Strong grinder clencher. Which do you recommend for my top two teeth around my bunny teeth?
Would a metal crown be best for molar? 😊 thanks
Thank you Doctor
Very informative thank you.
I have teeth gap in upper front of teeth which treatment are best for me 🙏🥰🥰
Bridge
What is this combination called, part zirconia and max?
Emax
Hi doctor what type of crown do you recommend for the 2 front teeth on the top if I bite down hard to eat and sometimes I have grinding problems
which type of crown did you get and are you happy with it?
Is this combination of emax and zirconia available in India and if yes then how much it will cost?
which type of crown did you get and are you happy with it?
@@mohammedzabeerali8920 I got zirconia. It has a little color difference but not too noticeable. I got a 5 year warranty. But the emax with zirconia had 8 year warranty but was dobble the cost of zirconia.
and is emax with zirconia better to look than zirconia? please respond , I broke my front upper tooth
@@mohammedzabeerali8920 same with me. I guess email is better in look but too costly. But also zirconia is not too noticeable.
@@passion_of_business and please say how much is the cost for both of them..?
Hi. I have a question, how much time does a zirconia crown last usually?
20yrs
Rootcanal teeth with crown lasts for?
@@RahulRaj-xs2onzirconia implants lasts longer?
@@pragnaranjusanju3345cant say how long will it last. After RCT tooth becomes brittle. But can last 20+ years
I read chlorhexidine and coffee can discolour zirconia is this true?
Really? I need to know more about it.
darn! i just had 5 front teeth zirconias put on.. i wished i knew about emax. darn it!
Most dentist prefer to put zirconia because as this doctor said emax is not as stong as zirconiom.But for aesthetic purposes emax looks natural teeth as it has high translucency,zirconia is more opaque that it looks thick and plasticky
If it's 5 teeth it should b fine I guess...if you replaced just one Tooth with zirconia that may standout.....
@@Liaaexp-s8d1h it wont stand out if the colour looks the same as the other teeth
Emax also does not apply to everyone ,it depends on the status of your original teeth or how much work or modification dentist need to do achieve the smile you want
Is emax a veneer or crown?
Emax is just material. They used to crowns and veneers
I have a big crown- I have a bridge of zirconia of 5 teeth but look today like dogs teething
Please what do you mean?is it so bad am worried cos i want to go to türkei for zirconia.
Same answer I am thinking about going to turkey as well
@@smarphe3239 Go in Greece is cheaper there and you learn also science and Greek history.
@@Potencyfunction I dont need to go to Greece I just need the surgery
Is that combination of zirconium and eMax called Celtra Duo?
Good question! that is what I am looking for! But no answer.
I like your accent Dr 🫶😊
in Europe you dont have to make this choice.... the best emax hd crown is around 800 euros...
Perfect doc
Спасибо за информацию, доктор. У нас в россии ставят оксид циркония на жевательные зубы
M from india and i can't afford to go to us do u have any clinics in india m 21 yr old and I've been waiting for an implant from the last 9 years can u help?
❤
На руском 🎉
😂😂😂5