Well I don't know how I missed this one, it just showed up in my feed. That is one sweet looking/shooting pistol!! I get the same remarks from people doubting the distance I shoot at, even though I've measured it on camera. Just ignore the haters brother, you are the real deal!! Have a great week my friend!
Hi Ray (X-Ring), greetings from Thailand. So with your recommendation I went out to look for CZ TSO, (I also checked out Tanfoglio Limited Custom), STI. In Thailand firearm laws are strict, taxes and permit costs are very high. After investigation, a TSO is roughly $3700, a Tanfoglio is $4300, STI DVC $6800, all in 9mm though... .40 S&W version will have a higher tax and permit cost because the law says it is not a self defense caliber. I am making a decision on a .40 BUL SAS II SAW (a 2011 from an Israeli manufacturer). It costs a little more than the 9mm Tanfoglio (Personally I will take the Tanfoglio Limited Custom if the importer is willing to accept a .40 order, but no luck). BUL is not up to STI's quality but close. The pistol grip will need gunsmith stipple job tho. I've also just picked up a CZ Shadow 2 for IPSC's production division. Will be testing it out at the range this week. It definitely needs spring mod to bring down the DA trigger pull weight. (But out of the box the trigger is so much lighter than my old FS92) Here in Thailand no handload and reload ammo so we shoot whatever that's available. Can't afford a STI, Alas, Akai, SVI yet, but I have your channel to look at those pistols :-) I have a question. If a custom shop is crazy enough to overcome technical difficulties and make a 2011 so most of slide's metal is on the frame and make it ride inside the frame like the CZ, would it be a beast to shoot? (Basically make it look like a CZ but keep the safety, trigger, slide release, etc.) Have a good day. Sam. P.S. great content as always.
golferchin76 Thanks for the comment golferchin. It is amazing about the different laws from country to country. If you were able to find a Custom Smith to be able to make what you are wanting. I think it would shoot great actually. Keeping that mass lower on the receiver should work out very well. The hard part is going to be finding someone capable of doing the work. I wish you the best in your endeavor! Keep me updated and thanks for watching !
Infinity 5 inch vs 5.4 inch both got Island ported barrel with SRO, which one has less felt recoil, flatter easier to shoot ? I need to decide on which one to go with for my build, please if you give me your advice which one to go with as I'm running out of time. Thanks again.
How good are these pistols. I’m planning on getting one one day but I obviously have my suspicions. Are they reliable, high quality, and good to handle. A pistol like that has a pretty steep price and I need to be sure.
@@XRING what are your thoughts on ported barrel for 5" or 5.5 inch 9mm if I had to go with Infinity compared to Atlas Artemis sight block, which on would be a flatter shooting gun?
X-Ring, butt hurt idiots will now ask to watch ya measure the distance and will want to see the paperwork showing the calibration date of you measuring device! Great shooting!
Well I don't know how I missed this one, it just showed up in my feed. That is one sweet looking/shooting pistol!! I get the same remarks from people doubting the distance I shoot at, even though I've measured it on camera. Just ignore the haters brother, you are the real deal!! Have a great week my friend!
Thanks Fumasterchu!
You always have the coolest guns :)
Huuuuuhhhhh,. You said pasties........ Beautiful Pistol. I am going to have a 2011 very shortly
Absolutely John!
I am thinking about building my our 2011 this winter. That is a sweet looking 2011
Best intro ever and a beautiful master piece.
You always get to play with the cool toys!
Wonderful video.
That is beautiful.
Tom Olofsson Thanks Tom!
Nice looking pistol. Great group I would say.
Thanks TR
That is a work of art
Hi Ray (X-Ring), greetings from Thailand.
So with your recommendation I went out to look for CZ TSO, (I also checked out Tanfoglio Limited Custom), STI. In Thailand firearm laws are strict, taxes and permit costs are very high. After investigation, a TSO is roughly $3700, a Tanfoglio is $4300, STI DVC $6800, all in 9mm though... .40 S&W version will have a higher tax and permit cost because the law says it is not a self defense caliber.
I am making a decision on a .40 BUL SAS II SAW (a 2011 from an Israeli manufacturer). It costs a little more than the 9mm Tanfoglio (Personally I will take the Tanfoglio Limited Custom if the importer is willing to accept a .40 order, but no luck). BUL is not up to STI's quality but close. The pistol grip will need gunsmith stipple job tho.
I've also just picked up a CZ Shadow 2 for IPSC's production division. Will be testing it out at the range this week. It definitely needs spring mod to bring down the DA trigger pull weight. (But out of the box the trigger is so much lighter than my old FS92)
Here in Thailand no handload and reload ammo so we shoot whatever that's available.
Can't afford a STI, Alas, Akai, SVI yet, but I have your channel to look at those pistols :-)
I have a question. If a custom shop is crazy enough to overcome technical difficulties and make a 2011 so most of slide's metal is on the frame and make it ride inside the frame like the CZ, would it be a beast to shoot? (Basically make it look like a CZ but keep the safety, trigger, slide release, etc.)
Have a good day.
Sam.
P.S. great content as always.
golferchin76 Thanks for the comment golferchin. It is amazing about the different laws from country to country.
If you were able to find a Custom Smith to be able to make what you are wanting. I think it would shoot great actually. Keeping that mass lower on the receiver should work out very well.
The hard part is going to be finding someone capable of doing the work.
I wish you the best in your endeavor! Keep me updated and thanks for watching !
Infinity 5 inch vs 5.4 inch both got Island ported barrel with SRO, which one has less felt recoil, flatter easier to shoot ? I need to decide on which one to go with for my build, please if you give me your advice which one to go with as I'm running out of time. Thanks again.
Damn, you knew it was my birthday! You shouldn't have....
Happy Birthday! Pops :-)
Very nice pistol!
Nice Pistol & Great Shooting Brother! TFS Carry On
Thanks Big Johnson!
PHOTOSHOPPED VIDEO!! He's totally putting the muzzle ON the paper. /Endsarcasm Great looking pistol
LOL! Thanks Mike.
Nice😃🍀🇩🇪. Maybe a chapter 2 of your infintys☄❤️
I will see what I can do about that sir!
@@XRING Thank you Sir! I realy enjoy your Videos. Nice and calm narration, good information like a good teacher. Carry on Sir!
Nice. You could tell that was 20 yards on camera. Some people just want to argue.
I know...some people just like to argue.
How good are these pistols. I’m planning on getting one one day but I obviously have my suspicions. Are they reliable, high quality, and good to handle. A pistol like that has a pretty steep price and I need to be sure.
they are gonna love that !
Yes they are!
Another awesome video!!!! BTW what time piece are you sporting there buddy?
Thanks 24886544! Garmin Fenix 5x.
Great watch!
@@XRING much appreciated buddy!! Will go Have a gander at them now 🤙🏻
24886544 There are about 10 of us running those Garmins. None of us have had any issues in over a year.
Nice!
Shoots sweet like my kimber 1911 45acp
What’s better infinity or Atlas?
I like them both but Infinity without a doubt. It’s not even a fair comparison.
Do you still feel the same after owning the Artemis for a bit?
Keep up the great work!
Yes sir, still feel the same. Just got another Infinity 5.5”. Review coming soon.
@@XRING what are your thoughts on ported barrel for 5" or 5.5 inch 9mm if I had to go with Infinity compared to Atlas Artemis sight block, which on would be a flatter shooting gun?
This pistol looks like it came from an anime.
Nice pistol x ring hey if you keep it and your akai needs a new home my doors always open man hahaha worth a shot right
I appreciate it Nick! I think I’ll keep shooting it for just a little while.🤣
Straight flexing
very nice....now i have to wipe drool off my chin!
19 yards 11 3/16 inches distance! Report it right lol! If someone doesn't believe the info than they shouldn't watch the review.
I agree Harry!
X-Ring, butt hurt idiots will now ask to watch ya measure the distance and will want to see the paperwork showing the calibration date of you measuring device!
Great shooting!
That is the truth!! 100% correct.
tactical
People are too damn lazy and spend too much time online critiquing everyone else....while believeing they are better.....clowns!
I agree RazorJB! Hope you are doing well sir!
That gun is a waste for Rick :)
Man! You spoiled it! How did you guess ?