Galaxy S20 FE 5G USB Port Replacement w/ detailed instructions
Вставка
- Опубліковано 1 жов 2024
- USB C is great, but what happens when someone tries to force the wrong cable into the port? You can make it unusable. That was the case today, and we are going to take the phone apart and replace the USB board within the phone to restore functionality.
This is a fairly straightforward repair. We use a heating pad to remove the back cover, but if you don't have one, you can use a heat gun or hair dryer.
Thanks for watching!
Good video but one major miss in my experience. On reassembly the touchscreen was dead. No swipe. I reseated the connectors multiple times to no avail. Facial recognition worked and screen was visible but nothing could be accessed. Panic ensued. On a first open of the phone, it is MUCH more difficult than shown and takes minutes not seconds to open. The speaker assembly is jammed in the phone and is very difficult to actually pop out and bends when doing so, no damage. I actually bent the blade tool getting it out. It needs force to get in and actually pops audibly when rammed back in on the left side. I had to use the screws to force it back into place. I heated up the print bed on my 3D printer to 85 C and put the phone on it for 5 minutes and the glue was not a problem. The no touchscreen can be fixed with a hard reboot. Hold ON switch and Vol Down simultaneously for over 10 seconds and the phone will reboot. After reboot the touchscreen worked. Board, B-7000 glue and pro tools bought as a kit from NuFix, $25 CDN. Arrived fast and all worked perfectly, no affiliation or kickbacks here. No instructions either though.
Will not applying adhesive to the back of the new board cause any issues?
No, not at all. It’s held in place by screws as well. You’ll be fine without adhesive on the sub board.
Is there a video on how to seel the backplate back to the phone?
Whoa i thought it need some weld/heater stuff
Will the phone still charge without the speaker installed?
Yes, it will charge fine with no speaker installed.
@@colchesterphonerepair3835 I must of damaged the charge port board. Should of left it alone. TY for your help.