I just spent a solid hour trying to get the rings on by pulling with zero luck so I’ll comment my findings here to save people who may see this time. If you rotate the adjustable duct piece sideways, and pull it will come out. Do that and the body becomes just flexible enough to where you can see 4 clips at each 45 degree angle, and stick a thin screwdriver back there to undo them. The whole housing will come out with some force and you can reassemble the whole part and just push it back in. Hope this helps someone not deal with the struggles I did :)
You and everyone else man lol. I've described it a few times in the comments, but i really need to just dig in and make the video. Like a how-to for removal AND reinstallation.
Mine rattles when I’m driving.. a bit nervous to take it out and then glue the clips and put it back in so it stops rattling.. not sure whether to do it or not
I'm not sure on the exact part # for the rings but I'd bet you could score some at a parts yard pretty cheap. Look and see if you have a Pull-a-Part in your area.
I just spent a solid hour trying to get the rings on by pulling with zero luck so I’ll comment my findings here to save people who may see this time.
If you rotate the adjustable duct piece sideways, and pull it will come out. Do that and the body becomes just flexible enough to where you can see 4 clips at each 45 degree angle, and stick a thin screwdriver back there to undo them. The whole housing will come out with some force and you can reassemble the whole part and just push it back in. Hope this helps someone not deal with the struggles I did :)
That sounds a good deal easier than what I did
You saved me on the last part, couldn't take it back on was a real pain
Only video on UA-cam helped me
Thank you sir
This video helped a lot I couldn’t put it back in for a while. And this video let me put it in so quickly.
Right on. It's a pain right? Oddly difficult to explain too lol
Can we have a video of you putting the ring back on? Cause I’m struggling
You and everyone else man lol.
I've described it a few times in the comments, but i really need to just dig in and make the video. Like a how-to for removal AND reinstallation.
These videos are so helpful, thank you!
can you please take apart the inside of the vent because i want to color the vent knob and im afraid to break it.
Mine rattles when I’m driving.. a bit nervous to take it out and then glue the clips and put it back in so it stops rattling.. not sure whether to do it or not
Anyone know where to get a replacement for just the ring and not the entire AC vent?
I'm not sure on the exact part # for the rings but I'd bet you could score some at a parts yard pretty cheap. Look and see if you have a Pull-a-Part in your area.
Cool )
how do you remove the trim on the steering wheel the silver for painting
You have to remove the airbag in order to pull the steering wheel trim
I had the same question......and his reply was what I was afraid of 😒😭
@@nataliegasque8349 Have to pull air bag.
Any one know how to put back the ring?
4:29