The New Garage is Completely Finished! New Layout, New Tools, and New Projects. Now The Fun Starts!
Вставка
- Опубліковано 9 вер 2024
- The garage is finally nearing it's final form, or at least its temporary final form. I've been wanting to get into metalwork and fabrication work for a while now, and with the new house having this amazing detached workshop, I figured it was finally time to start! We pulled out the wall in the garage, added some new tools, finally finished the CNC plasma cutter, and finalized everything else. Super excited to finally get started on some new projects!
If you enjoy the channel and want to go above and beyond, you can support me and get access to special perks by becoming a channel member - / @garrettginner
Subscribe to my channel - bit.ly/subGarre...
PO BOX:
Garrett Ginner
PO Box 3150
Auburn, CA 95604
Insta - garrettginner
TikTok - garrettginner
Second channel - / @garrettginnerlive
X - garrettginner
Snap - GarrettDginner
Facebook - / garrettginnerskate
Discord - www.discord.bee...
----EQUIPMENT USED (affiliate links)----
Camera used - amzn.to/3W5WRlI
Tripod used - amzn.to/46gR6n3
12 pack of ramen - amzn.to/3QDAboQ
Business Inquiries - garrett@28thave.com
#garrettginner #skateboarding #vlog
Can’t believe how much Garrett has grown and matured, went from skating over a pool in his parents house to his own sanctuary, so proud of you young sir 🫡
I LOVE Garrett's life, he's doing it right!!!
I remember those videos over the pool
@@arthurtats get off his nutz
I'm a 35 year old electrician, I have 2 kids and a homeowner that used to skate hard and mess around with fun projects too. This channel has everything for me, also gets me motivated to start working on myself in a few aspects of my life. Cheers Garrett, keep em coming!
Definitely need a sign for your shop/park. That would be a great first project.
Agreed
𝒮𝓀𝒶𝓉ℯ 𝒮𝒽ℴ𝓅
This channel has turned into a modern day Home Improvement. Love the mix of content throughout the videos.
Garrett, as a welder/fabricator for around 10 years and a skater for around 20 years. You’re making my favorite content in the space right now. And your knowledge has grown exponentially over the last couple months with the fabrication side of things. Keep doing your passions man. Building things is the best. Much love from Maine!
Garrett for the window u covered up so you don’t smash it u should put a net or a strong piece of see through plastic to cover up so u still get the light from outside
Garrett's new format is "just scratching the tip of the shaft" (15:21). Keep it up!
Air compressor is very plug and go ready out the box. Plug er in and turn it on and attach hoses and go. Add oil if it requires it.
Instructions and “warm up periods” not needed :)
I too was afraid at his age of coping. So I only did flipy tricks. 😂
better feeling. Muska flip.
the feeling of the board rising and flattening under the feet is incredible, with a crazy pop. I recommend it to everyone.
Realest woodflipperlover in the section idk😂❤
That is a pretty rizzler trick tho ngl😂❤
Used to watch your content a while ago. I fell off and recently started binging all your new videos again and now i can’t stop watching. I went back and watched your kickflip over the last river (insane battle and incredible accomplishment) but it’s funny i enjoy your new content so much more. A lot more authentic feeling not trying to take anything away from your old stuff i do enjoy it but you genuinely seem much happier doing what your doing now. Keep it up. I’m pumped to be here for it.
The channel has matured along with the viewers, i think that's why we have enjoyed the transition 👍
Your excitement is infectious man been watching since the sac days and your latest has 100% been the most engaging to me seeing u go in to all these hobbies has been amazing
Random thought. You should take a piece of plywood, fit it to your window, and attach some hinges at the top of the wood. That way you can close it and protect it while you skate.
Nice mini ramp
I’ve skipped half the series but feel the pain. And the heat
You can also use the plasma for your car stuff! Making motor mounts, brackets, etc. Wish I had one lol
Seeing you going from the Santa Cruz house with Ben to this is crazy
Keep grinding, G !!
AGREED! Feeble to fakie is terrifying to me because I also got hung up and slammed.
id suggest no curve on the euro gap but build the underside to fit the stairs that way you can do tricks up and down and if put small peg holes you could remove or reinstall as needed
Gonna have to make a Berics 5 stair for fingerboards using the cnc for the rail!
New plasma Cnc is fire as my guy
It's like you are building a little metal/machine shop. I am now wondering if you will get into some kind of metal molding or casting in the future and start building your own skateboard truck ha ha. It will be interesting to see the fingerboard stuff you make. Keep up the great videos!!!!
I work at a Metal Fabrication Shop as a CNC Laser Operator/Programmer.
I like this content, lol. If you have the chance, look up Laser Cutters, or even the more crazy (IMHO) Water Jet tables.
I'll take my laser table over a plasma cutter any day, but it's much more expensive to own and maintain.
Anyway... just wanna say, have fun fabricating!
great miniramp sesh
Yes always at least breeze through the manual! 3:58 I used to work for the harbor freight call center and a lot of issues could’ve been solved through even just having the manual, manual is friend not fire fuel 🙌🏻👏🏼
Loving the new content, keep it up. If u still have that old log store you dragged out the way. Create an outside compressor house with a hardline + manifold for your indoor air connections? Keeps the noise down.
seeing you get so excited over an air compressor tank and all the new stuff you're learning is infectious, been checking daily to see the new upload and been loving them
You should mount the tube bender on platform on some appropriate caster wheels
Money bags sold out quick! I will keep an eye out for the next project 💯 they looked sick, new machines are hard to learn but your picking it up quick ☺️ GG
You could make a engraved metal deck for one of the walls 👍
garrett dude you’re awesome!!!! been watching you since you had your A4 and it’s crazy that i’ve grown with you, you’re a few years older but watching you grow and turn into a strong and charismatic man, inspires me. thank you for posting daily, keep on growing and progressing brotha!
Im super hyped to see videos when you start production on you plasma table. I love watching stuff like cnc cutting and laser engraving stuff so I can't even imagine how excited you are to have such a badass piece of equipment that can literally do 10,000 different projects at the push of a button.
Yo, Garrett. Would be sick to make a mini version of the berrics rail that you have now (with the stairs that you built) for a fingerboard obstacle! You can use both CNC machine to test that out?
I have loved seeing the whole process of the house coming together and the park looks insane! I’m so stoked for you and Taylor man 🩵
Been waiting for the finished product video for a long while now! Keep it up Garrett! LOVE the content. By far one of my favorite skating/sweeping/homeimprovent creators!!
Keep goin garret, the skater /fingerboarders dream home is something im ubur jealous of yet glad i can even watch someone else slowly build their dream workshop~~!
havin a tough day, thanks for posting the videos and makin me wanna go clean my garage so i can skate the rail
Hey garrett the builder, just a terminology tip: you said the pipe bender had the hydraulic atatchment but then you said it connects to the air compressor. In that case it's a pneumatic piston, not a hydraulic one.
Pneumatic - gas (air)
Hydraulic - fluid (oil)
Great vid!
Tig welding is fire bro
yooo someone needs to turn Garrett's house into a mod map in session
Dude, proud moment when your plasma cutter worked (moved) flawlessly. Ready to see that baby work
since you talk about it every 2 videos. i gotta say, i love the content.
Hahahahahaha thank you
See Garrett your not dxmb ill be waiting for the future project video keep it up
Dude eurogap on the right side of the rail ( closer to the mini ramp ).
I cant top thinking about a skatelite ramp in the steepest part between the house and shop with large quarter at the end. like a mini mega ramp
Just a heads up. Check if you need a dryer for the air compressor to keep water out of the lines. Condensation builds up in air compressors and gum up the works if you will.
For the euro gap why don't you get what you used for the frame of the stairs so you know it fits over them. Trim it down to size and then you got a straight kicker euro gap
Bump rainbow rail bump
This is better than any tv show! Love whatcha been doing, It’s like I’m kicking it with one of my homies
Fun trick challenge, working on them myself but haven't put one down clean.
Nollie back bigspin lateflip (front foot) back disaster. I've seen people pivot out to fakie but thats another world to me for this one. 🤷♂️
The last garret ginner video i saw must have been years ago, it was like a boardslide across pool, however long ago that was.
congrats!
Another great video! I am
Excited to see what’s next. Skating the mini ramp brings me back to the Santa Cruz days.
out of everything you posted since the move, I am most stoked to see what you do with the new tools, especially that plasma cnc. GG fabrications inc. lol
bro make a spot under the stairs build a small wall lined with sound foam throw that compressor in and run an air line out ;)
I love the Fortress Compressors I have a lil 4 Gallon one but it does 200 psi and 4 SCFM. You got a nice one looks like it's also 200 psi and 5.1 SCFM and shouldn't be too loud at 78 dBA
i would say if you do the casters do about a 3 foot circumference and make it a 6 leg it did look pretty heavy and the rails that may go into it may counter weigh it and tip it with just 4, but you do you my guy
Very awesome video
The tube bender could be cool to do the rail outside, like have 90 degree bends on the ends to make the legs at either side to save ya a bit of faffing when making the legs... you'd still need to weld middle legs but you'd be doing that anyway.
Make a cardboard template for your Euro Gap ramp.
"Scratching the tip of the shaft" new Garrett catchphrase every day :D
Maybe bump to stairs with down rails or have one side be a bump to bar and other down rail
That’d be sick!!
maybe check the "heat resistance" of the tanks since it's always F°100 in your garage...
the extension part of the mini ramp is kinda useless without a quarter pipe on the opposite side. the big wallride would make sense so you can hit the extension with full speed. and with the a-frame funbox and bank-gap-bank obstacle you don`really need an euro-gap in my opinion
The Shop looks super awesome man. Must be a dream come true and it really sounds like that when you are talking about it.
Excited to see what you do with all that crazy machinery :)
As i am not a skater (anymore) you maybe get into some decorational stuff as well besides fingerboard and skate obstacles. i would love to have something cool made by you for sure!
maybe taylor can help you figure out something for home decorations. I'll be the first customer 😃
That’s the plan 🤝🤝 thanks so much for supporting!
I highly recommend getting a dedicated laptop or PC to use for your CNC and Plasma machines software. I worked IT for a company that built golf cart accessories with those types of machines and had to replace a few PCs that were used for this stuff due to all the debris that they collected overtime. But actually you may have already solved that problem with the shop vac… nevermind 😅
Nah I’ll definitely want a dedicated shop laptop for sure. Something cheap that I don’t have to worry about
Do not point the plasma torch toward the air compressor
Yo Garrett, part of what I do for a living is bending pipe. I would not put that pipe bender on casters. Its gonna flip on you. Maybe make a bracket that is removable in the floor. I definitely wouldn't do that caster idea, unless the bass is BIG.
Hmmm appreciate the info! They make/sell caster base for it so I was just going to do my best to make something similar to it, following the dimensions. I’ll definitely be cautious with it though
@@GarrettGinner Ya I’m seen them before, usually when we bend pipe we either place it in the ground or bolt it into a work bench. I would hate you to get a base and it tip over on you.
You gotta paint the stairs to the room upstairs of the garage and paint the support beams maybe get a profesional street artist to graffiti your walls or do a mural of your liking 🤙🏽
Pressure cooker had me 😭😭
😂😂😂😂
"airbender, TUBEBENDER"
Hey Garrett 👋 I've been watching your channel on and off for years now and it's awesome to see your progression in life. Since you moved I've been watching every vid and the new content you've been putting out has been awesome man keep having fun and feeding your skills. Im a stone cnc programmer/mechanic We use park industries machinery on a bigger scale but im interested to see the differences between stone and metal fabrication.
Thanks so supporting!! I’d assume they’re relatively similar, but I also know nothing about stone work haha
MSCGA- Make Sweeping Content Great Again!
you should add a 3d printer to your list and make fingerboard molds
Just scratchin the tip of the shaft
Dude I have the same fear\phobia of pressurized and compressed canisters😂 I’m not only afraid they might blow up but I’m legit paranoid of leaks.
So proud of you
I’m the opposite my weakness Is street skating but I’ve been trying to skate more love the vidssss 🫶🫶🫶
Yo Garret I'am going to WoodWard West tomorrow
A customer Garrics like neon sign would be so sick.
Is it called addiction or dedication to binge watching every single video Garrett posts? 😂😂😂
Buy the stair runners and turn them upside down
lol def posted this seconds before you said it
Built to shred it used to be on fuel tv would be a cool idea
Or like grind hard plumbing Co but for skateboarding
15:22 pause 😂😂😂
I think a detachable mellow, straight euro gap would be sick! But that's just me lol
Don’t store compressor with air in it, just plug it back in to rebuild pressure again before you start using it.
WARNING!!! do not weld or plasma cut near your car you will burn the paint and pit the glass. im 30 now and have been restoring cars since i was 16 ive made this mistake more than im willing to admit
You should get an artist or graffiti artist to paint your walls that would be dope
That’d be so sick!
1:59 put away that inferior instrument and go grab some random object in arms reach 😂
18:02 also what happens if you push up up down down left right left right b a start
Do RTX Noise removal to be weird loool
make a kicker, cut the stairs out so its a euro, then take the cuts and make a mount for it, so u havea kicker and a euro, 2 birds 1 stone, u will have resources left over regardless, mind as well implement them
the kickers will be small and detached, make both so you have choices
Dude just had all these tricks just sitting in his head? How many try’s did all those mini ramp tricks take?
also an xbox controller for the CNC makes it much easier to use
Damn I didn’t know you could do that, that’s cool
"Scratching the tip of the shaft"
Bruh😂
😭😭😭
15:22 Bro
Flip back 5-0 on the mini
Bro I didn't know you had a S14 I have a s13 coupe can you do a video showing the 14 that's awesome any plans for it do you drift
do the bump to bar first
Wow