I have no idea how I found your channel, but I'm so happy I did. The R31 build and drifting path was awesome, I'm really looking forward to see where this Z build will take you. Greets from Slovenia Z fam.
I tell ya what Benny as a 33yr old man with 3 kids 😂 yes I dropped that line to give me merits I have been watching for maybe 5/6yrs you my friend have a head for radio I say that with no disrespect because you make up for it with a voice of an angel and you're cinema photography is next level weather it's rust or real like keep slaying mate, what a truckin legend
If you want good handbrake lockup on a budget just use an in-line hydro. Lots of people hate on it but I have been running them for many years. Works fine.
With the commodores you just have to turn the key a bit further to unlock them 😂 there's a mechanical section of the lock that allows you to unlock them when the battery dies
Benny bit late now, but with the standard VLSD you can add a shim to make it act like a welded diff. Luke Fink has a video on here showing how to do it. When you got the diff back in, how did it sound? I messed up the backlash on mine and it was knocking like crazy, had to leave it with somebody to get it sorted.
You can actually get Performance brake shoes for the rear for your handbrake. And for future reference. I would highly suggest going to a welded vlsd. Out of the four years my brother has owned his z. He has broken more axles and more open diffs than I can count on my hand. Plated or not. Welded vlsd hold up much stronger than an open differential when welded. I've seen tested and welded a few of them myself. The differential in my G has lasted over 2 years on the same 235k axles and vlsd weld. Not a single problem with the rear end
Love these vids, obviously you’re doing what you enjoy now and it shows through the high quality editing, the edits and intros are actually sick aswell keep it up 🤙
Absolutely another banger upload, use to weld my diffs up 10+ years ago on my old Mazda 1300 when you could find parts for them just use to weld the spider gears without pulling it all apart, man what trip down memory lane
I can't believe I found your channel by searching for shed remodels and have been watching since. You're absolutely incredible at putting together an entertaining video. Much love from Canada man 🍻
If you want to tighten the parking brake, on the rear backing plate close to where the parking cable goes in to the shoes there’s a rubber grommet usually. Pop that out and there’s a star wheel in there you can tighten or loosen the rear parking shoes. Good luck mate
next time to open commodore you can open bonnets by pulling the latch cable from under the front bar. also to break windows get a old spark plug and break the porcelain off and get a piece and chuck it at window which will pop it instantly.
I think you also need to cut wire 27 (or 23 cant remember but should be in the forum) to the back of the ecu and modify the abs fuse . Clipping the wire will let you foot brake whilst accelerating and abs on is bad for drifting
for next time, you want to torque the bearing caps on the diff to the housing. you can over torque them and kill the bearings. also really curious to see how the halfshaft mod turns out 😅 cheers
I’m glad you’re in there having a go man. Welding the diff is where a beginner should be starting I guess. But can I ask why you didn’t just get a mini spool? They’re so affordable now days.
best to spend the $ now on hydro for drift breaking cause e brakes arent meant for it. one day at the track and your e brake line will be stretch and or snapped and you'll have to replace it anyway. if the e-brake isnt working on the street at low speed well now, it wont work at the track anyway for long. every build I watch tries to get away without a hydro brake at first and ALWAYS regrets it later.
ss could’ve been opened with the key, just have to keep turning it until the key feels like it’ll break and she pops, still won’t be unlocked but you’ll be able to open your door
All 350s ive seen have nigaaz in the vin, Also inline hydro handbrake uses factory rear calipers, and cut ecu wire 101 so you can use the foot brake while wheels are spinning. (On the spot burn outs, left foot braking) And dont weld 350z lsd, shim them.
I knew when i saw you taking the whole diff completely apart it wasnt gonna go back together properly haha. You can weld the diff without taking it apart. Just open clean it up and weld
Benny mate 🤦🏻♂️ ya didn’t have to smash the window Next time it happens use the key and turn it till it bites then (I know it sounds sketch) turn it a little harder Has same thing happen to me and that’s how I and many other got in Anyways love the vids keep it up
Next diff you weld remove nothing, no plate just weld the corners been drifting for 15 years and welded alot of mine and friends diff and never had a problem
I have no idea how I found your channel, but I'm so happy I did. The R31 build and drifting path was awesome, I'm really looking forward to see where this Z build will take you. Greets from Slovenia Z fam.
I only found because of his gaming days
same here and also from slovenia
Bro is a beast at Rust and developed some of the best editing I have ever seen anywhere. This is his passion project channel.
Same, don’t know anything about him, only here because of his shed
@@twitch_not_olli5599I was here because of the garage lowk sick
top tier editing as always, If you want to break a window easily break a sparkplug and throw a broken porcelain piece at the window :)
I can 1up that, flick the bottom corner of the window with the side of a flare blade screwdriver, 1% effort required.
That VIN number still makes me chuckle!
My 2005 ford Mondeo has divorced me
So sad to hear that
Get an escort instead
Did she take half?
@@lettuce984car or person? 😢
@@lettuce984 na she just died of rust
This guy is gonna blow up
Yet another bomb video, it's been years and you still keep pushing top tier content!
I tell ya what Benny as a 33yr old man with 3 kids 😂 yes I dropped that line to give me merits I have been watching for maybe 5/6yrs you my friend have a head for radio I say that with no disrespect because you make up for it with a voice of an angel and you're cinema photography is next level weather it's rust or real like keep slaying mate, what a truckin legend
I found your shed building video one night at 3am and I’ve been thoroughly entertained since 👌 keep it up bro
If you want good handbrake lockup on a budget just use an in-line hydro. Lots of people hate on it but I have been running them for many years. Works fine.
With the commodores you just have to turn the key a bit further to unlock them 😂 there's a mechanical section of the lock that allows you to unlock them when the battery dies
When I say I insta clicked when the notification comes up every vid I mean every vid helped me push through and finish my build
Benny bit late now, but with the standard VLSD you can add a shim to make it act like a welded diff. Luke Fink has a video on here showing how to do it.
When you got the diff back in, how did it sound? I messed up the backlash on mine and it was knocking like crazy, had to leave it with somebody to get it sorted.
Came here to say exactly this, no need to weld them just a shim, check Lukes video on it
Or just weld the VLSD. That's what i did. Has been solid for like 5 years!
You can actually get Performance brake shoes for the rear for your handbrake. And for future reference. I would highly suggest going to a welded vlsd. Out of the four years my brother has owned his z. He has broken more axles and more open diffs than I can count on my hand. Plated or not. Welded vlsd hold up much stronger than an open differential when welded. I've seen tested and welded a few of them myself. The differential in my G has lasted over 2 years on the same 235k axles and vlsd weld. Not a single problem with the rear end
Duuuude the intro is PHENOMINAL. Love the COD Black Ops countdown music remix.
Love these vids, obviously you’re doing what you enjoy now and it shows through the high quality editing, the edits and intros are actually sick aswell keep it up 🤙
Absolutely another banger upload, use to weld my diffs up 10+ years ago on my old Mazda 1300 when you could find parts for them just use to weld the spider gears without pulling it all apart, man what trip down memory lane
Comment section on these vids are always top tier. Cheers to benny for the kickass videos and cheers to all you beauties reading this
I can't believe I found your channel by searching for shed remodels and have been watching since. You're absolutely incredible at putting together an entertaining video. Much love from Canada man 🍻
WOOOOO NEW BENNY VIDEO 🔥🔥🔥🔥🔥
This guy is legit the best dude on youtube rn imo
If you want to tighten the parking brake, on the rear backing plate close to where the parking cable goes in to the shoes there’s a rubber grommet usually. Pop that out and there’s a star wheel in there you can tighten or loosen the rear parking shoes. Good luck mate
Ong the best channel on this platform and I’m so glad I came across it
Huge shout-out from Southeastern Oklahoma! You're freaking hilarious bro!! Thank you for your content
I love the WoW music at the end, please do more of it 🫡
next time to open commodore you can open bonnets by pulling the latch cable from under the front bar. also to break windows get a old spark plug and break the porcelain off and get a piece and chuck it at window which will pop it instantly.
An easier thing than a window smash would be getting a jumper cable onto the starter solenoid or alternator output terminal from under the car.
Love the GTA4 music
Protip for locked out with a dead battery, jack the car up and try to reach the positive terminal on the starter or alternator with the jumper cables.
10:18 ayyy he's listening to Twice
i wish i had the money to support you on account of the music choice
perfect as always, benny
Mad max vibe, the black on black
6:12 oi bruv ur au is next aye
U know it’s a good day when Benny surge posts
Loving the intro buddy, its slick!
lets go new benny surge vid!
I love the Walter White mention and then the Breaking Bad style tune after. Great work
please never stop these car videos
I think you also need to cut wire 27 (or 23 cant remember but should be in the forum) to the back of the ecu and modify the abs fuse . Clipping the wire will let you foot brake whilst accelerating and abs on is bad for drifting
Give him an attaboy. I like that shock works fella.
I always get pumped seeing that Benny uploaded
for next time, you want to torque the bearing caps on the diff to the housing. you can over torque them and kill the bearings. also really curious to see how the halfshaft mod turns out 😅 cheers
These intros are SICK!!
Had the same problem with my SS but I just used a coat-hanger to pull the bonnet release lol
Never stop making these videos Surge!
for glass - spark plug tip does it in one go.
These videos are honestly so good.
I was laughing hard at the diff. I’m invested now
If you put the key in the door and turn hard it will unlock. Feels like you’re going to break the key but it will unlock
So cool that you went from rust to cars right as I made the transition as well 😂 one thing I can say is video games are a lot cheaper for sure 😢
I’m glad you’re in there having a go man. Welding the diff is where a beginner should be starting I guess. But can I ask why you didn’t just get a mini spool? They’re so affordable now days.
best to spend the $ now on hydro for drift breaking cause e brakes arent meant for it. one day at the track and your e brake line will be stretch and or snapped and you'll have to replace it anyway. if the e-brake isnt working on the street at low speed well now, it wont work at the track anyway for long.
every build I watch tries to get away without a hydro brake at first and ALWAYS regrets it later.
New Benny video, it's a good day.
Keep up the content Benny, love ya work man
The random Black ops songs are peak editing bro
It’s a good day when Surge uploads
Could just watch the 1hr unedited version, you're a funny man Ben!
Idk about that model but with the vy commodore you can reach under the front bumper and pull the cable yourself to pop the bonnet.
Always looking forward to your vids Benny
The best Song choice at the end there =)
I don't even have a licence but these videos have been amazing to watch
You need a licence to watch UA-cam….?
@@kanggvng yeah youtubes rolling it out to a few people at a time
@@caleborava UA-cam patrol about to do me for unlicensed consuming 💀
@@kanggvng In the UK you probably do haha. But meant more driver’s license
@@ThadonutRs I know, I’m taking the piss
I’ve been waiting for part 2 😫
cool beans! She's going to be a lot of fun.
Chris 😢 I did the same with my VU SS just so you know you can actually pull the bonnet cable from between the rad and bumper, just for next time 😂
my goat uploaded
You know its gonna be a good day when surge drops a car video 💖
Mate.... great editing and commentary
20:07 LOL You did not put a WoW song in bahahahah
The edits are so goood
I could give a shit about cars, but your editing is so good I watch all your vids. Cheers Surge
He is not a man of cars…..nachoooooooooooooo! lol
I can’t wait for bb Surges S2 69 part!!!!
woke up at the break of dawn one of the first few thoughts of the day was "i wonder if Benny put out a vid"
when you need to crack open the window on car take spark plug and hammer the white part when you hammerd it throw white part at the window
Love the videos, such a unique editing style
Your #1 on UA-cam
Loving the build
I have no idea what is going on but I'm watching every minute of this video cus its surge
APR GT WING LOOK SO SICK ON 350Z
lol the ss ute pour thing, could of just reached under and got the wire to release the bonnet :D
Bit late now but you can pull the bonnet release cable by putting your hand up in-between the rad and bumper 😅
Unexpected Elwynn Forest zone music at end!
your videos are very relaxing 👌
hit the edge of window screwdriver and hit with hand or broken spark plug throw a bit at window
ss could’ve been opened with the key, just have to keep turning it until the key feels like it’ll break and she pops, still won’t be unlocked but you’ll be able to open your door
When I was a kid I had a toy hot wheels 350z and it looked so awesome man I was like I want that car when I grow up but I never did buy one.
Mate yah fkn smashin it ayy churrr the brother surge 🤙🍻
It’s a good day when Ben drops a vid!!! Thanks bud!
All 350s ive seen have nigaaz in the vin,
Also inline hydro handbrake uses factory rear calipers, and cut ecu wire 101 so you can use the foot brake while wheels are spinning. (On the spot burn outs, left foot braking)
And dont weld 350z lsd, shim them.
loved the rust content and now car builds can it get any better
It’s Benny once again
Junkyard calipers. Any G35/350 will work. Thats how I did it. 65$ USD. Rebuild kits are cheap.
Love these videos
@20:13 Elywynn Forest music lmao
I knew when i saw you taking the whole diff completely apart it wasnt gonna go back together properly haha. You can weld the diff without taking it apart. Just open clean it up and weld
god i love this channel
20:23 Elwynn Forest sound track? =D
Fkn' love ya videos mate. Good shit. Always quality bro (Y)
love to see the vids bro
Benny mate 🤦🏻♂️ ya didn’t have to smash the window
Next time it happens use the key and turn it till it bites then (I know it sounds sketch) turn it a little harder
Has same thing happen to me and that’s how I and many other got in
Anyways love the vids keep it up
bro i love your videos, keep them up
for teh next time you needa break your windows go for the bottom corners, its easier too shatter there then in the middle
Next diff you weld remove nothing, no plate just weld the corners been drifting for 15 years and welded alot of mine and friends diff and never had a problem